Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Anomalous enhancement of the sheet carrier density beyond the classic limit on a SrTiO3 surface.

ABSTRACT: Electrostatic carrier accumulation on an insulating (100) surface of SrTiO3 by fabricating a field effect transistor with Parylene-C (6?nm)/HfO2 (20?nm) bilayer gate insulator has revealed a mystifying phenomenon: sheet carrier density is about 10 times as large as ( is the sheet capacitance of the gate insulator, VG is the gate voltage, and e is the elementary charge). The channel is so clean to exhibit small subthreshod swing of 170?mV/decade and large mobility of 11?cm(2)/Vs for of 1?×?10(14)?cm(-2) at room temperature. Since does not depend on either VG nor time duration, beyond is solely ascribed to negative charge compressibility of the carriers, which was in general considered as due to exchange interactions among electrons in the small limit. However, the observed is too large to be naively understood by the framework. Alternative ideas are proposed in this work.

SUBMITTER: Kumar N

PROVIDER: S-EPMC4865841 | biostudies-other | 2016

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Publications

Anomalous enhancement of the sheet carrier density beyond the classic limit on a SrTiO3 surface.

Kumar Neeraj N Kitoh Ai A Inoue Isao H IH

Scientific reports 20160512

Electrostatic carrier accumulation on an insulating (100) surface of SrTiO3 by fabricating a field effect transistor with Parylene-C (6 nm)/HfO2 (20 nm) bilayer gate insulator has revealed a mystifying phenomenon: sheet carrier density is about 10 times as large as ( is the sheet capacitance of the gate insulator, VG is the gate voltage, and e is the elementary charge). The channel is so clean to exhibit small subthreshod swing of 170 mV/decade and large mobility of 11 cm(2)/Vs for of 1 × 10(14) ...[more]

PMID: 27174141

Similar Datasets

Enhanced and continuous electrostatic carrier doping on the SrTiO3 surface

Project description:Paraelectrical tuning of a charge carrier density as high as 1013 cm?2 in the presence of a high electronic carrier mobility on the delicate surfaces of correlated oxides, is a key to the technological breakthrough of a field effect transistor (FET) utilising the metal-nonmetal transition. Here we introduce the Parylene-C/Ta2O5 hybrid gate insulator and fabricate FET devices on single-crystalline SrTiO3, which has been regarded as a bedrock material for oxide electronics. The gate insulator accumulates up to ~1013cm?2 carriers, while the field-effect mobility is kept at 10 cm2/Vs even at room temperature. Further to the exceptional performance of our devices, the enhanced compatibility of high carrier density and high mobility revealed the mechanism for the long standing puzzle of the distribution of electrostatically doped carriers on the surface of SrTiO3. Namely, the formation and continuous evolution of field domains and current filaments.

| S-EPMC3634102 | biostudies-literature

Anomalous enhancement of charge density wave in kagome superconductor CsV3Sb5 approaching the 2D limit.

Project description:The recently discovered kagome metals AV3Sb5 (A = Cs, Rb, K) exhibit a variety of intriguing phenomena, such as a charge density wave (CDW) with time-reversal symmetry breaking and possible unconventional superconductivity. Here, we report a rare non-monotonic evolution of the CDW temperature (TCDW) with the reduction of flake thickness approaching the atomic limit, and the superconducting transition temperature (Tc) features an inverse variation with TCDW. TCDW initially decreases to a minimum value of 72 K at 27 layers and then increases abruptly, reaching a record-high value of 120 K at 5 layers. Raman scattering measurements reveal a weakened electron-phonon coupling with the reduction of sample thickness, suggesting that a crossover from electron-phonon coupling to dominantly electronic interactions could account for the non-monotonic thickness dependence of TCDW. Our work demonstrates the novel effects of dimension reduction and carrier doping on quantum states in thin flakes and provides crucial insights into the complex mechanism of the CDW order in the family of AV3Sb5 kagome metals.

| S-EPMC10148882 | biostudies-literature

Nonequilibrium charge-density-wave order beyond the thermal limit.

Project description:The interaction of many-body systems with intense light pulses may lead to novel emergent phenomena far from equilibrium. Recent discoveries, such as the optical enhancement of the critical temperature in certain superconductors and the photo-stabilization of hidden phases, have turned this field into an important research frontier. Here, we demonstrate nonthermal charge-density-wave (CDW) order at electronic temperatures far greater than the thermodynamic transition temperature. Using time- and angle-resolved photoemission spectroscopy and time-resolved X-ray diffraction, we investigate the electronic and structural order parameters of an ultrafast photoinduced CDW-to-metal transition. Tracking the dynamical CDW recovery as a function of electronic temperature reveals a behaviour markedly different from equilibrium, which we attribute to the suppression of lattice fluctuations in the transient nonthermal phonon distribution. A complete description of the system's coherent and incoherent order-parameter dynamics is given by a time-dependent Ginzburg-Landau framework, providing access to the transient potential energy surfaces.

| S-EPMC8093280 | biostudies-literature

Carrier density independent scattering rate in SrTiO3-based electron liquids.

Project description:We examine the carrier density dependence of the scattering rate in two- and three-dimensional electron liquids in SrTiO3 in the regime where it scales with T(n) (T is the temperature and n ≤ 2) in the cases when it is varied by electrostatic control and chemical doping, respectively. It is shown that the scattering rate is independent of the carrier density. This is contrary to the expectations from Landau Fermi liquid theory, where the scattering rate scales inversely with the Fermi energy (EF). We discuss that the behavior is very similar to systems traditionally identified as non-Fermi liquids (n < 2). This includes the cuprates and other transition metal oxide perovskites, where strikingly similar density-independent scattering rates have been observed. The results indicate that the applicability of Fermi liquid theory should be questioned for a much broader range of correlated materials and point to the need for a unified theory.

| S-EPMC4748255 | biostudies-other

Zn2+ Ion Surface Enrichment in Doped Iron Oxide Nanoparticles Leads to Charge Carrier Density Enhancement.

Project description:Here, we report the development of monodisperse Zn-doped iron oxide nanoparticles (NPs) with different amounts of Zn (Zn x Fe3-x O4, 0 < x < 0.43) by thermal decomposition of a mixture of zinc and iron oleates. The as-synthesized NPs show a considerable fraction of wüstite (FeO) which is transformed to spinel upon 2 h oxidation of the NP reaction solutions. At any Zn doping amounts, we observed the enrichment of the NP surface with Zn2+ ions, which is enhanced at higher Zn loadings. Such a distribution of Zn2+ ions is attributed to the different thermal decomposition profiles of Zn and Fe oleates, with Fe oleate decomposing at much lower temperature than that of Zn oleate. The decomposition of Zn oleate is, in turn, catalyzed by a forming iron oxide phase. The magnetic properties were found to be strongly dependent on the Zn doping amounts, showing the saturation magnetization to decrease by 9 and 20% for x = 0.05 and 0.1, respectively. On the other hand, X-ray photoelectron spectroscopy near the Fermi level demonstrates that the Zn0.05Fe2.95O4 sample displays a more metallic character (a higher charge carrier density) than undoped iron oxide NPs, supporting its use as a spintronic material.

| S-EPMC6643693 | biostudies-literature

Surface Engineering for Mechanical Enhancement of Cell Sheet by Nano-Coatings.

Project description:Cell sheet technology is becoming increasingly popular in tissue engineering and regenerative medicine, due to integrity into versatile organ and manageable cell and tissue type from the bank, and no needs of large volume organ for transplantation. Cell sheets have still a room to resolve the mechanical resistance under load-bearing occasion, easy translocation into organ, and prompt shape modulation for regular application in vivo. Herein, a layer-by-layer (LbL) assembly of nanometer scaled film coating method was introduced to inter-planar cell sheet for multilayered cell sheet (M1) and a single cell before sheet formation (M2). Nano-films with collagen and alginate increased mechanical property of cell sheets without altering cell functions, viability, and proliferation. The moduli of triple layered cell sheet (M1) and (M2) were critically enhanced to 109% and 104%, compared to uncoated cell sheet (CON) with mono-layer, while modulus of CON with triple-layers were increased to 43%. LbL assembly to cell sheets offers increased modulus allowing cell sheet engineering to become a potential strategy under load-bearing environment.

| S-EPMC5493676 | biostudies-literature

Surface Modification and Subsequent Fermi Density Enhancement of Bi(111).

Project description:Defects introduced to the surface of Bi(111) break the translational symmetry and modify the surface states locally. We present a theoretical and experimental study of the 2D defects on the surface of Bi(111) and the states that they induce. Bi crystals cleaved in ultrahigh vacuum (UHV) at low temperature (110 K) and the resulting ion-etched surface are investigated by low-energy electron diffraction (LEED), X-ray photoelectron spectroscopy, ultraviolet photoelectron spectroscopy (UPS), and scanning tunneling microscopy (STM) as well as spectroscopy (STS) techniques in combination with density functional theory (DFT) calculations. STS measurements of cleaved Bi(111) reveal that a commonly observed bilayer step edge has a lower density of states (DOS) around the Fermi level as compared to the atomic-flat terrace. Following ion bombardment, the Bi(111) surface reveals anomalous behavior at both 110 and 300 K: Surface periodicity is observed by LEED, and a significant increase in the number of bilayer step edges and energetically unfavorable monolayer steps is observed by STM. It is suggested that the newly exposed monolayer steps and the type A bilayer step edges result in an increase to the surface Fermi density as evidenced by UPS measurements and the Kohn-Sham DOS. These states appear to be thermodynamically stable under UHV conditions.

| S-EPMC8279637 | biostudies-literature

Surface properties of atomically flat poly-crystalline SrTiO3.

Project description:Comparison between single- and the poly-crystalline structures provides essential information on the role of long-range translational symmetry and grain boundaries. In particular, by comparing single- and poly-crystalline transition metal oxides (TMOs), one can study intriguing physical phenomena such as electronic and ionic conduction at the grain boundaries, phonon propagation, and various domain properties. In order to make an accurate comparison, however, both single- and poly-crystalline samples should have the same quality, e.g., stoichiometry, crystallinity, thickness, etc. Here, by studying the surface properties of atomically flat poly-crystalline SrTiO3 (STO), we propose an approach to simultaneously fabricate both single- and poly-crystalline epitaxial TMO thin films on STO substrates. In order to grow TMOs epitaxially with atomic precision, an atomically flat, single-terminated surface of the substrate is a prerequisite. We first examined (100), (110), and (111) oriented single-crystalline STO surfaces, which required different annealing conditions to achieve atomically flat surfaces, depending on the surface energy. A poly-crystalline STO surface was then prepared at the optimum condition for which all the domains with different crystallographic orientations could be successfully flattened. Based on our atomically flat poly-crystalline STO substrates, we envision expansion of the studies regarding the TMO domains and grain boundaries.

| S-EPMC4351548 | biostudies-literature

Beyond the classic thermoneutral zone: Including thermal comfort.

Project description:The thermoneutral zone is defined as the range of ambient temperatures where the body can maintain its core temperature solely through regulating dry heat loss, i.e., skin blood flow. A living body can only maintain its core temperature when heat production and heat loss are balanced. That means that heat transport from body core to skin must equal heat transport from skin to the environment. This study focuses on what combinations of core and skin temperature satisfy the biophysical requirements of being in the thermoneutral zone for humans. Moreover, consequences are considered of changes in insulation and adding restrictions such as thermal comfort (i.e. driver for thermal behavior). A biophysical model was developed that calculates heat transport within a body, taking into account metabolic heat production, tissue insulation, and heat distribution by blood flow and equates that to heat loss to the environment, considering skin temperature, ambient temperature and other physical parameters. The biophysical analysis shows that the steady-state ambient temperature range associated with the thermoneutral zone does not guarantee that the body is in thermal balance at basal metabolic rate per se. Instead, depending on the combination of core temperature, mean skin temperature and ambient temperature, the body may require significant increases in heat production or heat loss to maintain stable core temperature. Therefore, the definition of the thermoneutral zone might need to be reformulated. Furthermore, after adding restrictions on skin temperature for thermal comfort, the ambient temperature range associated with thermal comfort is smaller than the thermoneutral zone. This, assuming animals seek thermal comfort, suggests that thermal behavior may be initiated already before the boundaries of the thermoneutral zone are reached.

| S-EPMC4977175 | biostudies-literature

Photocatalytic Overall Water Splitting by SrTiO3 with Surface Oxygen Vacancies.

Project description:Strontium Titanate has a typical perovskite structure with advantages of low cost and photochemical stability. However, the wide bandgap and rapid recombination of electrons and holes limited its application in photocatalysis. In this work, a SrTiO3 material with surface oxygen vacancies was synthesized via carbon reduction under a high temperature. It was successfully applied for photocatalytic overall water splitting to produce clean hydrogen energy under visible light irradiation without any sacrificial reagent for the first time. The photocatalytic overall water splitting ability of the as-prepared SrTiO3-C950 is attributed to the surface oxygen vacancies that can make suitable energy levels for visible light response, improving the separation and transfer efficiency of photogenerated carriers.

| S-EPMC7767457 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data