Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Correction of the Electrical and Thermal Extrinsic Effects in Thermoelectric Measurements by the Harman Method.

ABSTRACT: Although the Harman method evaluates the thermoelectric figure-of-merit in a rapid and simple fashion, the accuracy of this method is affected by several electrical and thermal extrinsic factors that have not been thoroughly investigated. Here, we study the relevant extrinsic effects and a correction scheme for them. A finite element model simulates the electrical potential and temperature fields of a sample, and enables the detailed analysis of electrical and thermal transport. The model predicts that the measurement strongly depends on the materials, sample geometries, and contact resistance of the electrodes. To verify the model, we measure the thermoelectric properties of Bi2-Te3 based alloys with systematically varied sample geometries and either with a point or a surface current source. By comparing the model and experimental data, we understand how the measurement conditions determine the extrinsic effects, and, furthermore, able to extract the intrinsic thermoelectric properties. A correction scheme is proposed to eliminate the associated extrinsic effects for an accurate evaluation. This work will help the Harman method be more consistent and accurate and contribute to the development of thermoelectric materials.

SUBMITTER: Kang MS

PROVIDER: S-EPMC4873790 | biostudies-other | 2016

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Modelling of segmented high-performance thermoelectric generators with effects of thermal radiation, electrical and thermal contact resistances.

Project description:In this study, segmented thermoelectric generators (TEGs) have been simulated with various state-of-the-art TE materials spanning a wide temperature range, from 300 K up to 1000 K. The results reveal that by combining the current best p-type TE materials, BiSbTe, MgAgSb, K-doped PbTeS and SnSe with the strongest n-type TE materials, Cu-Doped BiTeSe, AgPbSbTe and SiGe to build segmented legs, TE modules could achieve efficiencies of up to 17.0% and 20.9% at ?T = 500 K and ?T = 700 K, respectively, and a high output power densities of over 2.1 Watt cm(-2) at the temperature difference of 700 K. Moreover, we demonstrate that successful segmentation requires a smooth change of compatibility factor s from one end of the TEG leg to the other, even if s values of two ends differ by more than a factor of 2. The influence of the thermal radiation, electrical and thermal contact effects have also been studied. Although considered potentially detrimental to the TEG performance, these effects, if well-regulated, do not prevent segmentation of the current best TE materials from being a prospective way to construct high performance TEGs with greatly enhanced efficiency and output power density.

| S-EPMC4823787 | biostudies-literature

Thermoelectric materials by using two-dimensional materials with negative correlation between electrical and thermal conductivity.

Project description:In general, in thermoelectric materials the electrical conductivity ? and thermal conductivity ? are related and thus cannot be controlled independently. Previously, to maximize the thermoelectric figure of merit in state-of-the-art materials, differences in relative scaling between ? and ? as dimensions are reduced to approach the nanoscale were utilized. Here we present an approach to thermoelectric materials using tin disulfide, SnS2, nanosheets that demonstrated a negative correlation between ? and ?. In other words, as the thickness of SnS2 decreased, ? increased whereas ? decreased. This approach leads to a thermoelectric figure of merit increase to 0.13 at 300?K, a factor ?1,000 times greater than previously reported bulk single-crystal SnS2. The Seebeck coefficient obtained for our two-dimensional SnS2 nanosheets was 34.7?mV?K(-1) for 16-nm-thick samples at 300?K.

| S-EPMC4919538 | biostudies-literature

An Improved Method for Determining Urease Activity from Electrical Conductivity Measurements.

Project description:We present an improved approach to evaluating the activity of urease from electrical conductivity (EC) measurements. In this approach, chemical equilibrium modeling via PHREEQC is used in conjunction with empirical equations for computing EC to develop a function that relates the increase in EC during urea hydrolysis in a closed reactor to the concentration of ammonium species present (and concentration of urea remaining) in the reaction solution. By applying this function to data from continuous measurement of EC during urea hydrolysis, we obtain a profile of the concentration of the urea substrate with time, which is then used to determine the urease activity. The activity of commercially available urease extracted from jack beans was determined using this method and compared well to the activity determined using Nessler's reagent, a commonly used colorimetric assay. This EC-based method is inexpensive and can be used for accurate determination of urease activity for a variety of applications.

| S-EPMC10116633 | biostudies-literature

Proton dose distribution measurements using a MOSFET detector with a simple dose-weighted correction method for LET effects.

Project description:We experimentally evaluated the proton beam dose reproducibility, sensitivity, angular dependence and depth-dose relationships for a new Metal Oxide Semiconductor Field Effect Transistor (MOSFET) detector. The detector was fabricated with a thinner oxide layer and was operated at high-bias voltages. In order to accurately measure dose distributions, we developed a practical method for correcting the MOSFET response to proton beams. The detector was tested by examining lateral dose profiles formed by protons passing through an L-shaped bolus. The dose reproducibility, angular dependence and depth-dose response were evaluated using a 190 MeV proton beam. Depth-output curves produced using the MOSFET detectors were compared with results obtained using an ionization chamber (IC). Since accurate measurements of proton dose distribution require correction for LET effects, we developed a simple dose-weighted correction method. The correction factors were determined as a function of proton penetration depth, or residual range. The residual proton range at each measurement point was calculated using the pencil beam algorithm. Lateral measurements in a phantom were obtained for pristine and SOBP beams. The reproducibility of the MOSFET detector was within 2%, and the angular dependence was less than 9%. The detector exhibited a good response at the Bragg peak (0.74 relative to the IC detector). For dose distributions resulting from protons passing through an L-shaped bolus, the corrected MOSFET dose agreed well with the IC results. Absolute proton dosimetry can be performed using MOSFET detectors to a precision of about 3% (1 sigma). A thinner oxide layer thickness improved the LET in proton dosimetry. By employing correction methods for LET dependence, it is possible to measure absolute proton dose using MOSFET detectors.

| S-EPMC5718688 | biostudies-literature

Breaking the trade-off between thermal and electrical conductivities in the thermoelectric material of an artificially tilted multilayer.

Project description:Breaking the trade-off between thermoelectric (TE) parameters has long been demanded in order to highly enhance its performance. Here, we report the 'trade-off-free' interdependence between thermal conductivity (κ) and resistivity (ρ) in a TE/metal tilted multilayer and significant enhancement of TE power generation based on the off-diagonal thermoelectric (ODTE) effect, which generates transverse electrical current in response to vertical thermal current. ρ and κ can be simultaneously decreased by setting charge flow along more-electrically conductive layer and thermal flow across less-thermally conductive perpendicular direction by decreasing the tilting angle. Moreover, introducing porosity in the metal layer enables to decrease in κ without changing ρ, because the macroscopic ρ and κ of the tilted multilayer is respectively governed by the properties of the TE material and the metal with large dissimilarity. The obtained results reveal new strategies for developing trade-off-free TE materials, which will stimulate practical use of TE conversion for waste-heat recovery.

| S-EPMC4133718 | biostudies-literature

Quantitative evaluation of extrinsic factors influencing electrical excitability in neuronal networks: Voltage Threshold Measurement Method (VTMM).

Project description:The electrical excitability of neural networks is influenced by different environmental factors. Effective and simple methods are required to objectively and quantitatively evaluate the influence of such factors, including variations in temperature and pharmaceutical dosage. The aim of this paper was to introduce 'the voltage threshold measurement method', which is a new method using microelectrode arrays that can quantitatively evaluate the influence of different factors on the electrical excitability of neural networks. We sought to verify the feasibility and efficacy of the method by studying the effects of acetylcholine, ethanol, and temperature on hippocampal neuronal networks and hippocampal brain slices. First, we determined the voltage of the stimulation pulse signal that elicited action potentials in the two types of neural networks under normal conditions. Second, we obtained the voltage thresholds for the two types of neural networks under different concentrations of acetylcholine, ethanol, and different temperatures. Finally, we obtained the relationship between voltage threshold and the three influential factors. Our results indicated that the normal voltage thresholds of the hippocampal neuronal network and hippocampal slice preparation were 56 and 31 mV, respectively. The voltage thresholds of the two types of neural networks were inversely proportional to acetylcholine concentration, and had an exponential dependency on ethanol concentration. The curves of the voltage threshold and the temperature of the medium for the two types of neural networks were U-shaped. The hippocampal neuronal network and hippocampal slice preparations lost their excitability when the temperature of the medium decreased below 34 and 33°C or increased above 42 and 43°C, respectively. These results demonstrate that the voltage threshold measurement method is effective and simple for examining the performance/excitability of neuronal networks.

| S-EPMC6022462 | biostudies-literature

Investigation for Thermoelectric Properties of the MoS<sub>2</sub> Monolayer-Graphene Heterostructure: Density Functional Theory Calculations and Electrical Transport Measurements.

Project description:We investigated the thermoelectric (TE) properties of the MoS2 monolayer-graphene heterostructure which consists of the MoS2 monolayer and graphene. The electronic structures of the MoS2 monolayer-graphene heterostructure are mainly contributed from graphene and the MoS2 monolayer for the valence band maximum and conduction band minimum, respectively. The change in the electronic structures near the Fermi level is responsible for the fact that the calculated Seebeck coefficients S and electrical conductivity σ/τ of MoS2 monolayer-graphene are largely affected from those of graphene and the MoS2 monolayer. Its power factor S 2σ/τ is increased compared to those of graphene and the MoS2 monolayer at an electron concentration of 1011 to 1012 cm-2, which corresponds to a three-dimensional concentration of 3 × 1018 to 3 × 1019 cm-3. We also demonstrated that the MoS2 monolayer shows the p-type TE behavior, while the MoS2 monolayer-graphene heterostructure is given to the n-type TE material. The current study provides a strategy to improve TE properties of the MoS2 monolayer through the formation of the MoS2 monolayer-graphene heterostructure.

| S-EPMC7807777 | biostudies-literature

Thermal Stability and Thermoelectric Properties of NaZnSb.

Project description:A layered Zintl antimonide NaZnSb (PbClF or Cu₂Sb structure type; P4/nmm) was synthesized using the reactive sodium hydride NaH precursor. This method provides comprehensive compositional control and facilitates the fast preparation of high-purity samples in large quantities. NaZnSb is highly reactive to humidity/air and hydrolyzes to NaOH, ZnO, and Sb in aerobic conditions. On the other hand, NaZnSb is thermally stable up to 873 K in vacuum, as no structural changes were observed from high-temperature synchrotron powder X-ray diffraction data in the 300⁻873 K temperature range. The unit cell expansion upon heating is isotropic; however, interatomic distance elongation is not isotropic, consistent with the layered structure. Low- and high-temperature thermoelectric properties were measured on pellets densified by spark plasma sintering. The resistivity of NaZnSb ranges from 11 mΩ∙cm to 31 mΩ∙cm within the 2⁻676 K range, consistent with heavily doped semiconductor behavior, with a narrow band gap of 0.23 eV. NaZnSb has a large positive Seebeck coefficient (244 μV∙K-1 at 476 K), leading to the maximum of zT of 0.23 at 675 K. The measured thermoelectric properties are in good agreement with those predicted by theoretical calculations.

| S-EPMC6337516 | biostudies-literature

An Electrical Contacts Study for Tetrahedrite-Based Thermoelectric Generators.

Project description:High electrical and thermal contact resistances can ruin a thermoelectric device's performance, and thus, the use of effective diffusion barriers and optimization of joining methods are crucial to implement them. In this work, the use of carbon as a Cu11Mn1Sb4S13 tetrahedrite diffusion barrier, and the effectiveness of different fixation techniques for the preparation of tetrahedrite/copper electrical contacts were investigated. Contacts were prepared using as jointing materials Ni and Ag conductive paints and resins, and a Zn-5wt% Al solder. Manual, cold- and hot-pressing fixation techniques were explored. The contact resistance was measured using a custom-made system based on the three points pulsed-current method. The legs interfaces (Cu/graphite/tetrahedrite) were investigated by optical and scanning electron microscopies, complemented with energy-dispersive X-ray spectroscopy, and X-ray diffraction. No interfacial phases were formed between the graphite and the tetrahedrite or Cu, pointing to graphite as a good diffusion barrier. Ag water-based paint was the best jointing material, but the use of hot pressing without jointing materials proves to be the most reliable technique, presenting the lowest contact resistance values. Computer simulations using the COMSOL software were performed to complement this study, indicating that high contact resistances strongly reduce the power output of thermoelectric devices.

| S-EPMC9573378 | biostudies-literature

Correction: Effects of trap confinement on personality measurements in two terrestrial rodents.

Project description:[This corrects the article DOI: 10.1371/journal.pone.0221136.].

| S-EPMC7018005 | biostudies-literature