Formation of Magnetic Anisotropy by Lithography.
Ontology highlight
ABSTRACT:
SUBMITTER: Kim SN
PROVIDER: S-EPMC4877648 | biostudies-other | 2016
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Designing and implementing means of locally trapping magnetic beads and understanding the factors underlying the bead capture force are important steps toward advancing the capture-release process of magnetic particles for biological applications. In particular, capturing magnetically labeled cells using magnetic microstructures with perpendicular magnetic anisotropy (PMA) will enable an approach to cell manipulation for emerging lab-on-a-chip devices. Here, a Co (0.2 nm)/Ni (0.4 nm) multilayered structure was designed to exhibit strong PMA and large saturation magnetization (Ms ). Finite element simulations were performed to assess the dependence of the capture force on the value of Ms . The simulated force profile indicated the largest force at the perimeter of the disks. Arrays of Co/Ni disk structures of (4-7) μm diameter were fabricated and tested in a microchannel with suspended fluorescent magnetic beads. The magnetic beads were captured and localized to the edge of the disks as predicted by the simulations. This approach has been demonstrated to enable uniform assembly of magnetic beads without external fields and may provide a pathway toward precise cell manipulation methods.
| S-EPMC7552876 | biostudies-literature
Project description:The coupling between a material's lattice and its underlying spin state links structural deformation to magnetic properties; however, traditional strain engineering does not allow the continuous, post-synthesis control of lattice symmetry needed to fully utilize this fundamental coupling in device design. Uniaxial lattice expansion induced by post-synthesis low energy helium ion implantation is shown to provide a means of bypassing these limitations. Magnetocrystalline energy calculations can be used a priori to estimate the predictive design of a material's preferred magnetic spin orientation. The efficacy of this approach is experimentally confirmed in a spinel CoFe2O4 model system where the epitaxial film's magnetic easy axis is continuously manipulated between the out-of-plane (oop) and in-plane (ip) directions as lattice tetragonality moves from ip to oop with increasing strain doping. Macroscopically gradual and microscopically abrupt changes to preferential spin orientation are demonstrated by combining ion irradiation with simple beam masking and lithographic procedures. The ability to design magnetic spin orientations across multiple length scales in a single crystal wafer using only crystal symmetry considerations provides a clear path toward the rational design of spin transfer, magnetoelectric, and skyrmion-based applications where magnetocrystalline energy must be dictated across multiple length scales.
| S-EPMC6247029 | biostudies-literature
Project description:Continuous miniaturization of magnetic units in spintronics devices inspires efforts to search for novel 2D magnetic materials with giant magnetic anisotropy energy (MAE). Through systematic first-principles calculations, large MAE of 24 meV in W or Re embedded 2D polyporphyrin frameworks is found. Interestingly, the MAE can be enhanced up to 60 meV, through replacing the hydrogen atoms on the edges of the Re based 2D polyporphyrin framework by hydroxyl and amino radicals. Analysis of the electronic structures reveals that the enhancement of MAE is mainly attributed to charge redistributions and energy shifts of Re 5d orbitals induced by the functional radicals. The findings pave a new and feasible way for tailoring the magnetic properties of magnetic organic materials to fulfill the criteria for applications in spintronics devices at high temperature.
| S-EPMC5644233 | biostudies-literature
Project description:Research on proximity effects in superconductor/ferromagnetic hybrids has most often focused on how superconducting properties are affected-and can be controlled-by the effects of the ferromagnet's exchange or magnetic fringe fields. The opposite, namely the possibility to craft, tailor and stabilize the magnetic texture in a ferromagnet by exploiting superconducting effects, has been more seldom explored. Here we show that the magnetic flux trapped in high-temperature superconducting YBa2Cu3O7-δ microstructures can be used to modify the magnetic reversal of a hard ferromagnet-a cobalt/platinum multilayer with perpendicular magnetic anisotropy-and to imprint unusual magnetic domain distributions in a controlled manner via the magnetic field history. The domain distributions imprinted in the superconducting state remain stable, in absence of an external magnetic field, even after increasing the temperature well above the superconducting critical temperature, at variance to what has been observed for soft ferromagnets with in-plane magnetic anisotropy. This opens the possibility of having non-trivial magnetic configuration textures at room temperature after being tailored below the superconducting transition temperature. The observed effects are well explained by micromagnetic simulations that demonstrate the role played by the magnetic field from the superconductor on the nucleation, propagation, and stabilization of magnetic domains.
| S-EPMC8531309 | biostudies-literature
Project description:Enhancement of mechanical properties in self-assembled superstructures of magnetic nanoparticles is a new emerging aspect of their remarkable collective behavior. However, how magnetic interactions modulate mechanical properties is, to date, not fully understood. Through a comprehensive Monte Carlo investigation, this study demonstrates how the mechanical properties of self-assembled magnetic nanocubes can be controlled intrinsically by the nanoparticle magnetocrystalline anisotropy (MA), as well as by the superstructure shape anisotropy, without any need for changes in structural design (i.e., nanoparticle size, shape, and packing arrangement). A low MA-to-dipolar energy ratio, as found in iron oxide and permalloy systems, favors isotropic mechanical superstructure stabilization, whereas a high ratio yields magnetically blocked nanoparticle macrospins which can give rise to metastable superferromagnetism, as expected in cobalt ferrite simple cubic supercrystals. Such full parallel alignment of the particle moments is shown to induce mechanical anisotropy, where the superior high-strength axis can be remotely reconfigured by means of an applied magnetic field. The new concepts developed here pave the way for the experimental realization of smart magneto-micromechanical systems (based, e.g., on the permanent super-magnetostriction effect illustrated here) and inspire new design rules for applied functional materials.
| S-EPMC8061348 | biostudies-literature
Project description:While the blocking barrier (U eff) and blocking temperature (T B) for "Dysprocenium" SIMs have been increased beyond liquid N2 temperature, device fabrication of these molecules remains a challenge as low-coordinate Ln3+ complexes are very unstable. Encapsulating the lanthanide ion inside a cage such as a fullerene (called endohedral metallofullerene or EMF) opens up a new avenue leading to several Ln@EMF SMMs. The ab initio CASSCF calculations play a pivotal role in identifying target metal ions and suitable cages in this area. Encouraged by our earlier prediction on Ln2@C79N, which was verified by experiments, here we have undertaken a search to enhance the exchange coupling in this class of molecules beyond the highest reported value. Using DFT and ab initio calculations, we have studied a series of Gd2@C2n (30 ≤ 2n ≤ 80), where an antiferromagnetic J Gd⋯Gd of -43 cm-1 was found for a stable Gd2@C38-D 3h cage. This extremely large and exceptionally rare 4f⋯4f interaction results from a direct overlap of 4f orbitals due to the confinement effect. In larger cages such as Gd2@C60 and Gd2@C80, the formation of two centre-one-electron (2c-1e-) Gd-Gd bonds is perceived. This results in a radical formation in the fullerene cage leading to its instability. To avoid this, we have studied heterofullerenes where one of the carbon atoms is replaced by a nitrogen atom. Specifically, we have studied Ln2@C59N and Ln2@C79N, where strong delocalisation of the electron yields a mixed valence-like behaviour. This suggests a double-exchange (B) is operational, and CASSCF calculations yield a B value of 434.8 cm-1 and resultant J Gd-rad of 869.5 cm-1 for the Gd2@C59N complex. These parameters are found to be two times larger than the world-record J reported for Gd2@C79N. Further ab initio calculations reveal an unprecedented U cal of 1183 and 1501 cm-1 for Dy2@C59N and Tb2@C59N, respectively. Thus, this study offers strong exchange coupling as criteria for new generation SMMs as the existing idea of enhancing the blocking barrier via crystal field modulation has reached its saturation point.
| S-EPMC8565386 | biostudies-literature
Project description:We present a new method for fabricating magnetic tunnel junction nanopillars that uses polystyrene nanospheres as a lithographic template. Unlike the common approaches, which depend on electron beam lithography to sequentially fabricate each nanopillar, this method is capable of patterning a large number of nanopillars simultaneously. Both random and ordered nanosphere patterns have been explored for fabricating high quality tunneling junctions with magnetoresistance in excess of 100%, employing ferromagnetic layers with both out-of-plane and in-plane easy axis. Novel voltage induced switching has been observed in these structures. This method provides a cost-effective way of rapidly fabricating a large number of tunnel junction nanopillars in parallel.
| S-EPMC3674430 | biostudies-literature
Project description:We investigated the anisotropic magnetic properties of CePd2As2 by magnetic, thermal and electrical transport studies. X-ray diffraction confirmed the tetragonal ThCr2Si2-type structure and the high-quality of the single crystals. Magnetisation and magnetic susceptibility data taken along the different crystallographic directions evidence a huge crystalline electric field (CEF) induced Ising-type magneto-crystalline anisotropy with a large c-axis moment and a small in-plane moment at low temperature. A detailed CEF analysis based on the magnetic susceptibility data indicates an almost pure |±5/2〉 CEF ground-state doublet with the dominantly |±3/2〉 and the |±1/2〉 doublets at 290 K and 330 K, respectively. At low temperature, we observe a uniaxial antiferromagnetic (AFM) transition at T N = 14.7 K with the crystallographic c-direction being the magnetic easy-axis. The magnetic entropy gain up to T N reaches almost R ln 2 indicating localised 4 f-electron magnetism without significant Kondo-type interactions. Below T N , the application of a magnetic field along the c-axis induces a metamagnetic transition from the AFM to a field-polarised phase at μ 0 H c0 = 0.95 T, exhibiting a text-book example of a spin-flip transition as anticipated for an Ising-type AFM.
| S-EPMC5544730 | biostudies-other
Project description:We have studied the magnetic layer thickness dependence of the orbital magnetic moment in magnetic heterostructures to identify contributions from interfaces. Three different heterostructures, Ta/CoFeB/MgO, Pt/Co/AlOx and Pt/Co/Pt, which possess significant interface contribution to the perpendicular magnetic anisotropy, are studied as model systems. X-ray magnetic circular dichroism spectroscopy is used to evaluate the relative orbital moment, i.e. the ratio of the orbital to spin moments, of the magnetic elements constituting the heterostructures. We find that the relative orbital moment of Co in Pt/Co/Pt remains constant against its thickness whereas the moment increases with decreasing Co layer thickness for Pt/Co/AlOx, suggesting that a non-zero interface orbital moment exists for the latter system. For Ta/CoFeB/MgO, a non-zero interface orbital moment is found only for Fe. X-ray absorption spectra shows that a particular oxidized Co state in Pt/Co/AlOx, absent in other heterosturctures, may give rise to the interface orbital moment in this system. These results show element specific contributions to the interface orbital magnetic moments in ultrathin magnetic heterostructures.
| S-EPMC4601071 | biostudies-other
Project description:The magnetic anisotropy is decreased with increasing temperature in normal magnetic materials, which is harmful to the thermal stability of magnetic devices. Here, we report the realization of positive temperature coefficient of magnetic anisotropy in a novel composite combining ?-phase polyvinylidene fluoride (PVDF) with magnetostrictive materials (magnetostrictive film/PVDF bilayer structure). We ascribe the enhanced magnetic anisotropy of the magnetic film at elevated temperature to the strain-induced anisotropy resulting from the anisotropic thermal expansion of the ?-phase PVDF. The simulation based on modified Stoner-Wohlfarth model and the ferromagnetic resonance measurements confirms our results. The positive temperature coefficient of magnetic anisotropy is estimated to be 1.1 × 10(2)?J m(-3) K(-1). Preparing the composite at low temperature can enlarge the temperature range where it shows the positive temperature coefficient of magnetic anisotropy. The present results may help to design magnetic devices with improved thermal stability and enhanced performance.
| S-EPMC4196102 | biostudies-literature