Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Watt-level passively Q-switched heavily Er(3+)-doped ZBLAN fiber laser with a semiconductor saturable absorber mirror.

ABSTRACT: A diode-cladding pumped mid-infrared passively Q-switched Er(3+)-doped ZBLAN fiber laser with an average output power of watt-level based on a semiconductor saturable absorber mirror (SESAM) is demonstrated. Stable pulse train was produced at a slope efficiency of 17.8% with respect to launched pump power. The maximum average power of 1.01 W at a repetition rate of 146.3 kHz was achieved with a corresponding pulse energy of 6.9 μJ, from which the maximum peak power was calculated to be 21.9 W. To the best of our knowledge, the average power and the peak power are the highest in 3 μm region passively Q-switched fiber lasers. The influence of gain fiber length on the operation regime of the fiber laser has been investigated in detail.

SUBMITTER: Shen Y

PROVIDER: S-EPMC4880893 | biostudies-other | 2016

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Yb- and Er-doped fiber laser Q-switched with an optically uniform, broadband WS2 saturable absorber.

Project description:We demonstrate a ytterbium (Yb) and an erbium (Er)-doped fiber laser Q-switched by a solution processed, optically uniform, few-layer tungsten disulfide saturable absorber (WS2-SA). Nonlinear optical absorption of the WS2-SA in the sub-bandgap region, attributed to the edge-induced states, is characterized by 3.1% and 4.9% modulation depths with 1.38 and 3.83 MW/cm(2) saturation intensities at 1030 and 1558 nm, respectively. By integrating the optically uniform WS2-SA in the Yb- and Er-doped laser cavities, we obtain self-starting Q-switched pulses with microsecond duration and kilohertz repetition rates at 1030 and 1558 nm. Our work demonstrates broadband sub-bandgap saturable absorption of a single, solution processed WS2-SA, providing new potential efficacy for WS2 in ultrafast photonic applications.

| S-EPMC4677313 | biostudies-other

Passively harmonic dissipative soliton generation in normal dispersion erbium-doped fiber laser using SMS fiber as artificial saturable absorber.

Project description:Passively harmonic mode-locking has been experimentally demonstrated in an erbium-doped fiber laser with large normal dispersion using single-multi-single mode structure as artificial saturable absorber. By increasing the pump power under the same polarization setting, the mode-locking operation can switch from fundamental mode-locked to 5th order harmonic mode-locked. Highest repetition rate of 4.26 MHz (5th order harmonic) is observed, with pulse width and pulse energy ascertained at 290 fs and 3.0 nJ, respectively. Excellent signal-to-noise ratio (SNR) of above 50 dB is observed for all harmonic orders. The findings validated that SMS structure can be used to generate stable and switchable high order of harmonic mode-locked. The low-cost SMS fiber for harmonic mode-locked generation technique could lay the groundwork for future sustainable industrial growth.

| S-EPMC11220008 | biostudies-literature

Passively synchronized Q-switched and mode-locked dual-band Tm3+:ZBLAN fiber lasers using a common graphene saturable absorber.

Project description:Dual-band fiber lasers are emerging as a promising technology to penetrate new industrial and medical applications from their dual-band properties, in addition to providing compactness and environmental robustness from the waveguide structure. Here, we demonstrate the use of a common graphene saturable absorber and a single gain medium (Tm3+:ZBLAN fiber) to implement (1) a dual-band fiber ring laser with synchronized Q-switched pulses at wavelengths of 1480 nm and 1840 nm, and (2) a dual-band fiber linear laser with synchronized mode-locked pulses at wavelengths of 1480 nm and 1845 nm. Q-switched operation at 1480 nm and 1840 nm is achieved with a synchronized repetition rate from 20 kHz to 40.5 kHz. For synchronous mode-locked operation, pulses with full-width at half maximum durations of 610 fs and 1.68 ps at wavelengths of 1480 nm and 1845 nm, respectively, are obtained at a repetition rate of 12.3 MHz. These dual-band pulsed sources with an ultra-broadband wavelength separation of ~360 nm will add new capabilities in applications including optical sensing, spectroscopy, and communications.

| S-EPMC5090962 | biostudies-literature

Q-switched pulse operation in erbium-doped fiber laser subject to zirconia (ZrO2) nanoparticles-based saturable absorber.

Project description:In this paper, the zirconia (ZrO2) nanoparticles-based saturable-absorber (SA) have been incorporated in an erbium-doped fiber laser (EDFL) cavity for achieving a Q-switched pulse operation. The implementation of the zirconia nanoparticles-based powder on the fiber facet was accomplished using the index-matching gel's adhesion effect. The incorporation of SA in the laser cavity yielded a stable and self-starting Q-switched operation under 19.36 mW pump power that corresponded to the emission wavelength of 1557.29 nm. Additionally, it was observed that the EDFL's emission wavelength tuned from 1557.29 nm to 1562.3 nm , and the repetition rates and pulse width ranged from 61.2 to 130 kHz and 7.9 to 3.6 μs, respectively, as the pump power was increased from 19.36 to 380.16 mW. Measured experimental results reveal that at a maximum pump power of 380.16 mW, the maximum average output power, peak power, and pulse energy were noticed to be 1.17 mW, 2.5 mW, and 9 nJ, respectively. A 52 dB suppression in side bands was found at a pump power of 380.16 mW. Moreover, the stability and threshold tolerance of the EDFL has also been discussed in detail. These findings suggest that nanoparticle-based saturable absorbers have potential applications in a pulsed source, making it easier to implement in fiber cavity-based systems.

| S-EPMC10828679 | biostudies-literature

A Filmy Black-Phosphorus Polyimide Saturable Absorber for Q-Switched Operation in an Erbium-Doped Fiber Laser.

Project description:We demonstrate an erbium-doped fiber laser passively Q-switched by a black-phosphorus polyimide film. The multi-layer black-phosphorus (BP) nanosheets were prepared via a liquid exfoliation approach exploiting N-methylpyrrolidone as the dispersion liquid. By mixing the BP nanosheets with polyimide (PI), a piece of BP-PI film was obtained after evaporating the mixture in a petri dish. The BP-PI saturable absorber had a modulation depth of 0.47% and was inserted into an erbium-doped fiber laser to realize passive Q-switched operations. The repetition rate of the Q-switched laser increased from 5.73 kHz to 31.07 kHz when the laser pump was enhanced from 31.78 mW to 231.46 mW. Our results show that PI is an excellent host material to protect BP from oxidation, and the BP-PI film can act as a promising nonlinear optical device for laser applications.

| S-EPMC5457205 | biostudies-other

Passively mode-locked fiber laser by a cell-type WS2 nanosheets saturable absorber.

Project description:A cell-type saturable absorber has been demonstrated by filling the single mode photonic crystal fiber (SMPCF) with tungsten disulfide (WS2) nanosheets. The modulation depth, saturable intensity, and non-saturable loss of this SA are measured to be 3.53%, 159 MW/cm(2) and 23.2%, respectively. Based on this SA, a passively mode-locked EDF laser has been achieved with pulse duration of 808 fs and repetition rate of 19.57 MHz, and signal-noise-ratio (SNR) of 60.5 dB. Our results demonstrate that the cell-type WS2 nanosheets SA can serve as a good candidate for short-pulse mode locker.

| S-EPMC4515829 | biostudies-other

Ytterbium-doped fiber laser passively mode locked by few-layer Molybdenum Disulfide (MoS2) saturable absorber functioned with evanescent field interaction.

Project description:By coupling few-layer Molybdenum Disulfide (MoS2) with fiber-taper evanescent light field, a new type of MoS2 based nonlinear optical modulating element had been successfully fabricated as a two-dimensional layered saturable absorber with strong light-matter interaction. This MoS2-taper-fiber device is not only capable of passively mode-locking an all-normal-dispersion ytterbium-doped fiber laser and enduring high power laser excitation (up to 1 W), but also functions as a polarization sensitive optical modulating component (that is, different polarized light can induce different nonlinear optical response). Thanks to the combined advantages from the strong nonlinear optical response in MoS2 together with the sufficiently-long-range interaction between light and MoS2, this device allows for the generation of high power stable dissipative solitons at 1042.6 nm with pulse duration of 656 ps and a repetition rate of 6.74 MHz at a pump power of 210 mW. Our work may also constitute the first example of MoS2-enabled wave-guiding photonic device, and potential y give some new insights into two-dimensional layered materials related photonics.

| S-EPMC4161963 | biostudies-other

Ultrafast Yb-Doped Fiber Laser Using Few Layers of PdS2 Saturable Absorber.

Project description:Two-dimensional (2D) transition metal dichalcogenide (TMD) materials have exceptional optoelectronic and structural properties, which allow them to be utilized in several significant applications in energy, catalyst, and high-performance optoelectronic devices. Among other properties, the nonlinear optical properties are gaining much attention in the research field. In this work, a unique pentagonal TMD material, palladium disulfide (PdS2), is employed as a saturable absorber (SA) in an ytterbium-doped fiber (YDF) laser cavity and mode-locked laser pulse is generated. At first, liquid phase exfoliation is performed to prepare PdS2 nanoflakes. Afterward, the PdS2-nanoflakes solution was incorporated in the side-polished fiber (SPF) to form SPF-based PdS2-SA. By utilizing this SA, a highly stable mode-locked laser pulse is realized at pump power of 160 mW, which has a center wavelength of 1033 nm and a 3-dB spectral bandwidth of 3.7 nm. Moreover, the pulse duration, maximum power output and corresponding single-pulse energy were determined as 375 ps, 15.7 mW and 0.64 nJ, respectively. During the experiment, the mode-locked pulse remained stable till the pump power reached a value of 400 mW and, for the regulation of power, the slope efficiency is calculated at about 4.99%. These results indicate that PdS2 material is a promising nonlinear optical material for ultrafast optical applications in the near-infrared (NIR) region.

| S-EPMC7762252 | biostudies-literature

High Power Q-Switched Thulium Doped Fibre Laser using Carbon Nanotube Polymer Composite Saturable Absorber.

Project description:We have proposed and demonstrated a Q-switched Thulium doped fibre laser (TDFL) with a 'Yin-Yang' all-fibre cavity scheme based on a combination of nonlinear optical loop mirror (NOLM) and nonlinear amplified loop mirror (NALM). Unidirectional lasing operation has been achieved without any intracavity isolator. By using a carbon nanotube polymer composite based saturable absorber (SA), we demonstrated the laser output power of ~197 mW and pulse energy of 1.7 μJ. To the best of our knowledge, this is the highest output power from a nanotube polymer composite SA based Q-switched Thulium doped fibre laser.

| S-EPMC4827123 | biostudies-other

Radially polarized and passively Q-switched fiber laser.

Project description:We report, for the first time to our knowledge, a radially polarized and passively Q-switched Yb-doped fiber laser. By using a Cr(4+):YAG crystal as a saturable absorber and a photonic crystal grating as a polarization mirror, a radially polarized pulse is produced, which has 202 W of peak power, 75 ns duration, and ~92% polarization purity at a 56.6 kHz repetition rate. The Q-switched pulse with radial polarization from the fiber laser would facilitate numerous applications.

| S-EPMC5568895 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data