Widely tunable Tm-doped mode-locked all-fiber laser.
Ontology highlight
ABSTRACT:
SUBMITTER: Yan Z
PROVIDER: S-EPMC4893705 | biostudies-other | 2016
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Mid-infrared ultrafast fiber lasers are valuable for various applications, including chemical and biomedical sensing, material processing and military applications. Here, we report all-fiber high-power graphene mode-locked Tm/Ho co-doped fiber laser at long wavelength with evanescent field interaction. Ultrafast pulses up to 7.8 MHz are generated at a center wavelength of 1879.4 nm, with a pulse width of 4.7 ps. A graphene absorber integrated with a side-polished fiber can increase the damage threshold significantly. Harmonics mode-locking can be obtained till to the 21(th) harmonics at a pump power of above 500 mW. By using one stage amplifier in the anomalous dispersion regime, the laser can be amplified up to 450 mW and the narrowest pulse duration of 1.4 ps can be obtained simultaneously. Our work paves the way to graphene Tm/Ho co-doped mode-locked all-fiber master oscillator power amplifiers as potentially efficient and economic laser sources for high-power laser applications, such as special material processing and nonlinear optical studies.
| S-EPMC4644976 | biostudies-other
Project description:Femtosecond optical pulses have applications in optical communication, astronomical frequency combs, and laser spectroscopy. Here, a hybrid mode-locked erbium-doped fiber (EDF) laser with topological insulator (TI) is proposed, for the first time to our best knowledge. The pulsed laser deposition (PLD) method is employed to fabricate the fiber-taper TI saturable absorber (TISA). By virtue of the fiber-taper TISA, the hybrid EDF laser is passively mode-locked using the nonlinear polarization evolution (NPE), and emits 70 fs pulses at 1542 nm, whose 3 dB spectral width is 63 nm with a repetition rate and transfer efficiency of 95.4 MHz and 14.12%, respectively. Our experiments indicate that the proposed hybrid mode-locked EDF lasers have better performance to achieve shorter pulses with higher power and lower mode-locking threshold in the future.
| S-EPMC4728691 | biostudies-other
Project description:Graphene-like two dimensional materials, such as WS2 and MoS2, are highly anisotropic layered compounds that have attracted growing interest from basic research to practical applications. Similar with MoS2, few-layer WS2 has remarkable physical properties. Here, we demonstrate for the first time that WS2 nanosheets exhibit ultrafast nonlinear saturable absorption property and high optical damage threshold. Soliton mode-locking operations are achieved separately in an erbium-doped fiber laser using two types of WS2-based saturable absorbers, one of which is fabricated by depositing WS2 nanosheets on a D-shaped fiber, while the other is synthesized by mixing WS2 solution with polyvinyl alcohol, and then evaporating them on a substrate. At the maximum pump power of 600 mW, two saturable absorbers can work stably at mode-locking state without damage, indicating that few-layer WS2 is a promising high-power flexible saturable absorber for ultrafast optics. Numerous applications may benefit from the ultrafast nonlinear features of WS2 nanosheets, such as high-power pulsed laser, materials processing, and frequency comb spectroscopy.
| S-EPMC4302320 | biostudies-other
Project description:Few-layer transition-metal dichalcogenide WSe2/MoSe2 nanosheets are fabricated by a liquid exfoliation technique using sodium deoxycholate bile salt as surfactant, and their nonlinear optical properties are investigated based on a balanced twin-detector measurement scheme. It is demonstrated that both types of nanosheets exhibit nonlinear saturable absorption properties at the wavelength of 1.55 μm. By depositing the nanosheets on side polished fiber (SPF) or mixing the nanosheets with polyvinyl alcohol (PVA) solution, SPF-WSe2 saturable absorber (SA), SPF-MoSe2 SA, PVA-WSe2 SA, and PVA-MoSe2 SA are successfully fabricated and further tested in erbium-doped fiber lasers. The SPF-based SA is capable of operating at the high pump regime without damage, and a train of 3252.65 MHz harmonically mode-locked pulses are obtained based on the SPF-WSe2 SA. Soliton mode locking operations are also achieved in the fiber laser separately with other three types of SAs, confirming that the WSe2 and MoSe2 nanosheets could act as cost-effective high-power SAs for ultrafast optics.
| S-EPMC4806349 | biostudies-other
Project description:We demonstrate a high repetition rate passive harmonic mode-locking (HML) based on nonlinear polarization evolution (NPE) technique in a Tm-doped ring fiber laser cavity. Small net anomalous cavity dispersion based on dispersion compensation benefited the generation of high repetition rate HML due to the low soliton splitting threshold. Stable HML with a repetition rate of up to 14.5 GHz and a super-mode suppression (SSR) of 19 dB was obtained at the center wavelength of 1982.3 nm, which is about ten times of state of the art at 2 μm band mode-locking fiber laser to our best knowledge. The repetition rate was selectable between 1 GHz to 14.5 GHz through changing the pump power and intra-cavity polarization state, and the SSR better than 25 dB was obtained as the repetition rate less than 5 GHz.
| S-EPMC5552855 | biostudies-other
Project description:Highly Tm(3+) doped optical fibers are urgently desirable for 2.0 μm compact single-frequency fiber laser and high-repetition-rate mode-locked fiber laser. Here, we systematically investigated the optical parameters, energy transfer processes and thermal properties of Tm(3+) doped barium gallo-germanate (BGG) glasses. Highly Tm(3+) doped BGG glass single mode (SM) fibers were fabricated by the rod-in-tube technique. The Tm(3+) doping concentration reaches 7.6 × 10(20) ions/cm(3), being the reported highest level in Tm(3+) doped BGG SM fibers. Using ultra short (1.6 cm) as-drawn highly Tm(3+) doped BGG SM fiber, a single-frequency fiber laser at 1.95 μm has been demonstrated with a maximum output power of 35 mW when in-band pumped by a home-made 1568 nm fiber laser. Additionally, a multilongitudinal-mode fiber laser at 1.95 μm has also been achieved in a 10 cm long as-drawn active fiber, yielding a maximum laser output power of 165 mW and a slope efficiency of 17%. The results confirm that the as-drawn highly Tm(3+) doped BGG SM fibers are promising in applications that require high gain and high power from a short piece of active optical fiber.
| S-EPMC4734336 | biostudies-other
Project description:Multi-wavelength lasers have widespread applications (e.g. fiber telecommunications, pump-probe measurements, terahertz generation). Here, we report a nanotube-mode-locked all-fiber ultrafast oscillator emitting three wavelengths at the central wavelengths of about 1540, 1550, and 1560 nm, which are tunable by stretching fiber Bragg gratings. The output pulse duration is around 6 ps with a spectral width of ~0.5 nm, agreeing well with the numerical simulations. The triple-laser system is controlled precisely and insensitive to environmental perturbations with <0.04% amplitude fluctuation. Our method provides a simple, stable, low-cost, multi-wavelength ultrafast-pulsed source for spectroscopy, biomedical research and telecommunications.
| S-EPMC3779847 | biostudies-literature
Project description:We demonstrate the first 1.7 μm bismuth-doped fiber laser generating ultrashort pulses via passive mode-locking. Pulse operation has been achieved for both anomalous and normal dispersion of the laser cavity owing to broadband characteristics of carbon nanotube saturable absorber. The laser delivered 1.65 ps pulses in net anomalous dispersion regime. In normal dispersion regime, the laser delivered 14 ps pulses which could be compressed to 1.2 ps using external fiber compressor.
| S-EPMC4838940 | biostudies-other
Project description:A novel saturable absorber (SA) was fabricated by coating the topological insulator (TI) film on microfiber using pulsed laser deposition (PLD) method. The TISA device had an insertion loss of ~1.25 dB, a saturable intensity of 26.7 MW/cm(2), a modulation depth of ~5.7%, and a nonsaturable loss of 20.5%. Upon employing this SA device, we established a passively mode-locked EDFL and achieved nearly free-chirped soliton pulse with 286 fs of pulse duration and >73 dB of signal to noise ratio (SNR). This result clearly evidences that the PLD is an effective scheme for practical SA device fabrication.
| S-EPMC4346808 | biostudies-other
Project description:Solid-state femtosecond lasers have stimulated the broad adoption of multiphoton microscopy in the modern laboratory. However, these devices remain costly. Fiber lasers offer promise as a means to inexpensively produce ultrashort pulses of light suitable for nonlinear microscopy in compact, robust and portable devices. Although encouraging, the initial methods reported in the biomedical engineering community to construct home-built femtosecond fiber laser systems overlooked fundamental aspects that compromised performance and misrepresented the significant financial and intellectual investments required to build these devices. Here, we present a practical protocol to fabricate an all-normal-dispersion ytterbium (Yb)-doped femtosecond fiber laser oscillator using commercially-available parts (plus standard optical components and extra-cavity accessories) as well as basic fiber splicing and laser pulse characterization equipment. We also provide a synthesis of established protocols in the laser physics community, but often overlooked in other fields, to verify true versus seemingly (partial or noise-like) mode-locked performance. The approaches described here make custom fabrication of femtosecond fiber lasers more accessible to a wide range of investigators and better represent the investments required for the proper laser design, fabrication and operation.
| S-EPMC6414530 | biostudies-literature