Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Universal amorphous-amorphous transition in GexSe100-x glasses under pressure.

ABSTRACT: Pressure induced structural modifications in vitreous GexSe100-x (where 10 ≤ x ≤ 25) are investigated using X-ray absorption spectroscopy (XAS) along with supplementary X-ray diffraction (XRD) experiments and ab initio molecular dynamics (AIMD) simulations. Universal changes in distances and angle distributions are observed when scaled to reduced densities. All compositions are observed to remain amorphous under pressure values up to 42 GPa. The Ge-Se interatomic distances extracted from XAS data show a two-step response to the applied pressure; a gradual decrease followed by an increase at around 15-20 GPa, depending on the composition. This increase is attributed to the metallization event that can be traced with the red shift in Ge K edge energy which is also identified by the principal peak position of the structure factor. The densification mechanisms are studied in details by means of AIMD simulations and compared to the experimental results. The evolution of bond angle distributions, interatomic distances and coordination numbers are examined and lead to similar pressure-induced structural changes for any composition.

SUBMITTER: Yildirim C

PROVIDER: S-EPMC4895163 | biostudies-other | 2016

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Pressure-induced amorphous-to-amorphous configuration change in Ca-Al metallic glasses.

Project description:Pressure-induced amorphous-to-amorphous configuration changes in Ca-Al metallic glasses (MGs) were studied by performing in-situ room-temperature high-pressure x-ray diffraction up to about 40?GPa. Changes in compressibility at about 18?GPa, 15.5?GPa and 7.5?GPa during compression are detected in Ca(80)Al(20), Ca(72.7)Al(27.3), and Ca(66.4)Al(33.6) MGs, respectively, whereas no clear change has been detected in the Ca(50)Al(50) MG. The transfer of s electrons into d orbitals under pressure, reported for the pressure-induced phase transformations in pure polycrystalline Ca, is suggested to explain the observation of an amorphous-to-amorphous configuration change in this Ca-Al MG system. Results presented here show that the pressure induced amorphous-to-amorphous configuration is not limited to f electron-containing MGs.

| S-EPMC3332524 | biostudies-literature

Pressure Induced Liquid-to-Liquid Transition in Zr-based Supercooled Melts and Pressure Quenched Glasses.

Project description:Through high-energy x-ray diffraction and atomic pair density function analysis we find that Zr-based metallic alloy, heated to the supercooled liquid state under hydrostatic pressure and then quenched to room temperature, exhibits a distinct glassy structure. The PDF indicates that the Zr-Zr distances in this glass are significantly reduced compared to those quenched without pressure. Annealing at the glass transition temperature at ambient pressure reverses structural changes and the initial glassy state is recovered. This result suggests that pressure causes a liquid-to-liquid phase transition in this metallic alloy supercooled melt. Such a pressure induced transition is known for covalent liquids, but has not been observed for metallic liquids. The High Pressure Quenched glasses are stable in ambient conditions after decompression.

| S-EPMC5529562 | biostudies-literature

The yielding transition in amorphous solids under oscillatory shear deformation.

Project description:Amorphous solids are ubiquitous among natural and man-made materials. Often used as structural materials for their attractive mechanical properties, their utility depends critically on their response to applied stresses. Processes underlying such mechanical response, and in particular the yielding behaviour of amorphous solids, are not satisfactorily understood. Although studied extensively, observed yielding behaviour can be gradual and depend significantly on conditions of study, making it difficult to convincingly validate existing theoretical descriptions of a sharp yielding transition. Here we employ oscillatory deformation as a reliable probe of the yielding transition. Through extensive computer simulations for a wide range of system sizes, we demonstrate that cyclically deformed model glasses exhibit a sharply defined yielding transition with characteristics that are independent of preparation history. In contrast to prevailing expectations, the statistics of avalanches reveals no signature of the impending transition, but exhibit dramatic, qualitative, changes in character across the transition.

| S-EPMC5337995 | biostudies-literature

Universal insertion of molecules in ionic compounds under pressure.

Project description:Using first-principles calculations and crystal structure search methods, we found that many covalently bonded molecules such as H2, N2, CO2, NH3, H2O and CH4 may react with NaCl, a prototype ionic solid, and form stable compounds under pressure while retaining their molecular structure. These molecules, despite whether they are homonuclear or heteronuclear, polar or non-polar, small or large, do not show strong chemical interactions with surrounding Na and Cl ions. In contrast, the most stable molecule among all examples, N2, is found to transform into cyclo-N5- anions while reacting with NaCl under high pressures. It provides a new route to synthesize pentazolates, which are promising green energy materials with high energy density. Our work demonstrates a unique and universal hybridization propensity of covalently bonded molecules and solid compounds under pressure. This surprising miscibility suggests possible mixing regions between the molecular and rock layers in the interiors of large planets.

| S-EPMC10858741 | biostudies-literature

Higher superconducting transition temperature by breaking the universal pressure relation.

Project description:By investigating the bulk superconducting state via dc magnetization measurements, we have discovered a common resurgence of the superconducting transition temperatures (Tcs) of the monolayer Bi2Sr2CuO6+δ (Bi2201) and bilayer Bi2Sr2CaCu2O8+δ (Bi2212) to beyond the maximum Tcs (Tc-maxs) predicted by the universal relation between Tc and doping (p) or pressure (P) at higher pressures. The Tc of underdoped Bi2201 initially increases from 9.6 K at ambient to a peak at 23 K at 26 GPa and then drops as expected from the universal Tc-P relation. However, at pressures above 40 GPa, Tc rises rapidly without any sign of saturation up to 30 K at 51 GPa. Similarly, the Tc for the slightly overdoped Bi2212 increases after passing a broad valley between 20 and 36 GPa and reaches 90 K without any sign of saturation at 56 GPa. We have, therefore, attributed this Tc resurgence to a possible pressure-induced electronic transition in the cuprate compounds due to a charge transfer between the Cu 3[Formula: see text] and the O 2p bands projected from a hybrid bonding state, leading to an increase of the density of states at the Fermi level, in agreement with our density functional theory calculations. Similar Tc-P behavior has also been reported in the trilayer Br2Sr2Ca2Cu3O10+δ (Bi2223). These observations suggest that higher Tcs than those previously reported for the layered cuprate high-temperature superconductors can be achieved by breaking away from the universal Tc-P relation through the application of higher pressures.

| S-EPMC6369809 | biostudies-literature

Universal features of amorphous plasticity.

Project description:Plastic yielding of amorphous solids occurs by power-law distributed deformation avalanches whose universality is still debated. Experiments and molecular dynamics simulations are hampered by limited statistical samples, and although existing stochastic models give precise exponents, they require strong assumptions about fixed deformation directions, at odds with the statistical isotropy of amorphous materials. Here, we introduce a fully tensorial, stochastic mesoscale model for amorphous plasticity that links the statistical physics of plastic yielding to engineering mechanics. It captures the complex shear patterning observed for a wide variety of deformation modes, as well as the avalanche dynamics of plastic flow. Avalanches are described by universal size exponents and scaling functions, avalanche shapes, and local stability distributions, independent of system dimensionality, boundary and loading conditions, and stress state. Our predictions consistently differ from those of mean-field depinning models, providing evidence that plastic yielding is a distinct type of critical phenomenon.

| S-EPMC5500855 | biostudies-literature

From amorphous to crystalline: a universal strategy for structure regulation of high-entropy transition metal oxides.

Project description:High-entropy materials (HEMs) exhibit extensive application potential owing to their unique structural characteristics. Structure regulation is an effective strategy for enhancing material performance. However, the fabrication of HEMs by integrating five metal elements into a single crystalline phase remains a grand challenge, not to mention their structure regulation. Herein, an amorphous-to-crystalline transformation route is proposed to simultaneously achieve the synthesis and structure regulation of high-entropy metal oxides (HEMOs). Through a facile hydrothermal technique, five metal sources are uniformly integrated into amorphous carbon spheres, which are transformed to crystalline HEMOs after calcination. Importantly, by controlling ion diffusion and oxidation rates, HEMOs with different structures can be controllably achieved. As an example, HEMO of the five first-row transition metals CrMnFeCoNiO is synthesized through the amorphous-to-crystalline transformation route, and structure regulation from solid spheres to core-shell spheres, and then to hollow spheres, is successfully realized. Among the structures, the core-shell CrMnFeCoNiO exhibits enhanced lithium storage performance due to the component and structural advantages. Our work expands the synthesis methods for HEMs and provides a rational route for structure regulation, which brings them great potential as high-performance materials in energy storage and conversion.

| S-EPMC9930932 | biostudies-literature

Structural Phase Transition of ThC Under High Pressure.

Project description:Thorium monocarbide (ThC) as a potential fuel for next generation nuclear reactor has been subjected to its structural stability investigation under high pressure, and so far no one reported the observation of structure phase transition induced by pressure. Here, utilizing the synchrotron X-ray diffraction technique, we for the first time, experimentally revealed the phase transition of ThC from B1 to P4/nmm at pressure of ~58 GPa at ambient temperature. A volume collapse of 10.2% was estimated during the phase transition. A modulus of 147 GPa for ThC at ambient pressure was obtained and the stoichiometry was attributed to the discrepancy of this value to the previous reports.

| S-EPMC5428025 | biostudies-literature

Ultrastable glasses portray similar behaviour to ordinary glasses at high pressure.

Project description:Pressure experiments provide a unique opportunity to unravel new insights into glass-forming liquids by exploring its effect on the dynamics of viscous liquids and on the evolution of the glass transition temperature. Here we compare the pressure dependence of the onset of devitrification, Ton, between two molecular glasses prepared from the same material but with extremely different ambient-pressure kinetic and thermodynamic stabilities. Our data clearly reveal that, while both glasses exhibit different dTon/dP values at low pressures, they evolve towards closer calorimetric devitrification temperature and pressure dependence as pressure increases. We tentatively interpret these results from the different densities of the starting materials at room temperature and pressure. Our data shows that at the probed pressures, the relaxation time of the glass into the supercooled liquid is determined by temperature and pressure similarly to the behaviour of liquids, but using stability-dependent parameters.

| S-EPMC5046104 | biostudies-literature

Phase transition induced strain in ZnO under high pressure.

Project description:Under high pressure, the phase transition mechanism and mechanical property of material are supposed to be largely associated with the transformation induced elastic strain. However, the experimental evidences for such strain are scanty. The elastic and plastic properties of ZnO, a leading material for applications in chemical sensor, catalyst, and optical thin coatings, were determined using in situ high pressure synchrotron axial and radial x-ray diffraction. The abnormal elastic behaviors of selected lattice planes of ZnO during phase transition revealed the existence of internal elastic strain, which arise from the lattice misfit between wurtzite and rocksalt phase. Furthermore, the strength decrease of ZnO during phase transition under non-hydrostatic pressure was observed and could be attributed to such internal elastic strain, unveiling the relationship between pressure induced internal strain and mechanical property of material. These findings are of fundamental importance to understanding the mechanism of phase transition and the properties of materials under pressure.

| S-EPMC4865855 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data