A new approach for two-terminal electronic memory devices - Storing information on silicon nanowires.
Ontology highlight
ABSTRACT:
SUBMITTER: Saranti K
PROVIDER: S-EPMC4899728 | biostudies-other | 2016
REPOSITORIES: biostudies-other
Similar Datasets
Project description:In this work, we explore the effect of ultrahigh tensile strain on electrical transport properties of silicon. By integrating vapor-liquid-solid-grown nanowires into a micromechanical straining device, we demonstrate uniaxial tensile strain levels up to 9.5%. Thereby the triply degenerated phonon dispersion relation at the Γ-point of silicon disentangle and the longitudinal phonon modes are used to precisely determine the extent of mechanical strain. Simultaneous electrical transport measurements showed a significant enhancement in the electrical conductance. Aside from considerable reduction of the Si bulk resistivity due to strain-induced band gap narrowing, comparison with quasi-particle GW calculations further reveals that the effective Schottky barrier height at the electrical contacts undergoes a substantial reduction. For these reasons, nanowire devices with ultrastrained channels may be promising candidates for future applications of high-performance silicon-based devices.
| S-EPMC11232017 | biostudies-literature
Project description:Resistive switching offers a promising route to universal electronic memory, potentially replacing current technologies that are approaching their fundamental limits. In many cases switching originates from the reversible formation and dissolution of nanometre-scale conductive filaments, which constrain the motion of electrons, leading to the quantisation of device conductance into multiples of the fundamental unit of conductance, G0. Such quantum effects appear when the constriction diameter approaches the Fermi wavelength of the electron in the medium - typically several nanometres. Here we find that the conductance of silicon-rich silica (SiOx) resistive switches is quantised in half-integer multiples of G0. In contrast to other resistive switching systems this quantisation is intrinsic to SiOx, and is not due to drift of metallic ions. Half-integer quantisation is explained in terms of the filament structure and formation mechanism, which allows us to distinguish between systems that exhibit integer and half-integer quantisation.
| S-EPMC3776960 | biostudies-literature
Project description:We report the nanocluster-catalyzed growth of ultralong and highly uniform single-crystalline silicon nanowires (SiNWs) with millimeter-scale lengths and aspect ratios up to approximately 100,000. The average SiNW growth rate using disilane (Si 2H 6) at 400 degrees C was 31 microm/min, while the growth rate determined for silane (SiH 4) reactant under similar growth conditions was 130 times lower. Transmission electron microscopy studies of millimeter-long SiNWs with diameters of 20-80 nm show that the nanowires grow preferentially along the 110 direction independent of diameter. In addition, ultralong SiNWs were used as building blocks to fabricate one-dimensional arrays of field-effect transistors (FETs) consisting of approximately 100 independent devices per nanowire. Significantly, electrical transport measurements demonstrated that the millimeter-long SiNWs had uniform electrical properties along the entire length of wires, and each device can behave as a reliable FET with an on-state current, threshold voltage, and transconductance values (average +/-1 standard deviation) of 1.8 +/- 0.3 microA, 6.0 +/- 1.1 V, 210 +/- 60 nS, respectively. Electronically uniform millimeter-long SiNWs were also functionalized with monoclonal antibody receptors and used to demonstrate multiplexed detection of cancer marker proteins with a single nanowire. The synthesis of structurally and electronically uniform ultralong SiNWs may open up new opportunities for integrated nanoelectronics and could serve as unique building blocks linking integrated structures from the nanometer through millimeter length scales.
| S-EPMC2664526 | biostudies-literature
Project description:Since the discovery of the presence of biogenic magnetites in living organisms, there have been speculations on the role that these biomagnetites play in cellular processes. It seems that the formation of biomagnetite crystals is a universal phenomenon and not an exception in living cells. Many experimental facts show that features of organic and inorganic processes could be indistinguishable at nanoscale levels. Living cells are quantum "devices" rather than simple electronic devices utilizing only the charge of conduction electrons. In our opinion, due to their unusual biophysical properties, special biomagnetites must have a biological function in living cells in general and in the brain in particular. In this paper, we advance a hypothesis that while biomagnetites are developed jointly with organic molecules and cellular electromagnetic fields in cells, they can record information about the Earth's magnetic vector potential of the entire flight in migratory birds.
| S-EPMC2791810 | biostudies-other
Project description:Conventional packaging and interconnection methods for two-terminal devices, e.g., diodes often involve expensive and bulky equipment, introduce parasitic effects and have reliability issues. In this study, we propose a built-in packaging method and evaluate its performance compared to probing and wire bonding methods. The built-in packaging approach offers a larger overlap area, improved contact resistance, and direct connection to testing equipment. The experimental results demonstrate a 12% increase in current, an 11% reduction in resistance, and improved performance of the diode. The proposed method is promising for enhancing sensing applications, wireless power transmission, energy harvesting, and solar rectennas. Overall, the built-in packaging method offers a simpler, cheaper, more compact and more reliable packaging solution, paving the way for more efficient and advanced technologies in these domains.
| S-EPMC10384851 | biostudies-literature
Project description:Human skin has been classified as a non-volatile memristor and it is shown that information can be stored within for at least three minutes. Here we investigate whether it is possible to store information up to 20 minutes. Furthermore, we investigate whether the information can be based on four different states, not just two (binary). We stored the information into the skin of the forehead of the test subjects under three different electrodes, which allows in principle for 64 different combinations (3 electrodes, 4 states) and one can think of numbers on the base of four. For this experiment, we decided on the numbers 1234 and 3024 (that correspond to numbers 27 and 50 in the decimal system). Writing of the different states was done by the application of DC voltage pulses that cause electro-osmosis in the sweat ducts (nonlinear electrical measurements). Based on our results, we were not able to distinguish between four different states. However, we can show that binary information storage in human skin is possible for up to 20 minutes.
| S-EPMC8667810 | biostudies-literature
Project description:Non-planar Fin Field Effect Transistors (FinFET) are already present in modern devices. The evolution from the well-established 2D planar technology to the design of 3D nanostructures rose new fabrication processes, but a technique capable of full characterization, particularly their dopant distribution, in a representative (high statistics) way is still lacking. Here we propose a methodology based on Medium Energy Ion Scattering (MEIS) to address this query, allowing structural and compositional quantification of advanced 3D FinFET devices with nanometer spatial resolution. When ions are backscattered, their energy losses unfold the chemistry of the different 3D compounds present in the structure. The FinFET periodicity generates oscillatory features as a function of backscattered ion energy and, in fact, these features allow a complete description of the device dimensions. Additionally, each measurement is performed over more than thousand structures, being highly representative in a statistical meaning. Finally, independent measurements using electron microscopy corroborate the proposed methodology.
| S-EPMC6691105 | biostudies-literature
Project description:A three-terminal synaptic transistor enables more accurate controllability over the conductance compared with traditional two-terminal synaptic devices for the synaptic devices in hardware-oriented neuromorphic systems. In this work, we fabricated IGZO-based three-terminal devices comprising HfAlOx and CeOx layers to demonstrate the synaptic operations. The chemical compositions and thicknesses of the devices were verified by transmission electron microscopy and energy dispersive spectroscopy in cooperation. The excitatory post-synaptic current (EPSC), paired-pulse facilitation (PPF), short-term potentiation (STP), and short-term depression (STD) of the synaptic devices were realized for the short-term memory behaviors. The IGZO-based three-terminal synaptic transistor could thus be controlled appropriately by the amplitude, width, and interval time of the pulses for implementing the neuromorphic systems.
| S-EPMC9919079 | biostudies-literature
Project description:Automatic release and vertical transferring of silicon/silicon oxide nanowire arrays with a high integrity are demonstrated by an Ag-assisted ammonia etching method. By adding a water steaming step between Ag-assisted HF/H2O2 and ammonia etching to form a SiOx protective layer sheathing Si nanowires, we can tune the composition of the nanowires from SiOx (0 ≤ x ≤ 2) to Si nanowires. Ag plays a key role to the neat and uniform release of Si/SiOx nanowire arrays from Si wafer in the ammonia etching process. The vertical Si nanowire array device, with both sides having high-quality Ohmic contact, can be transferred to arbitrary substrates, especially on a flexible substrate. The method developed here offers a facile method to realize flexible Si nanowire array functional devices.
| S-EPMC3909900 | biostudies-literature
Project description:Central to spintronics is the interconversion between electronic charge and spin currents, and this can arise from the chirality-induced spin selectivity (CISS) effect. CISS is often studied as magnetoresistance (MR) in two-terminal (2T) electronic nanodevices containing a chiral (molecular) component and a ferromagnet. However, fundamental understanding of when and how this MR can occur is lacking. Here, we uncover an elementary mechanism that generates such an MR for nonlinear response. It requires energy-dependent transport and energy relaxation within the device. The sign of the MR depends on chirality, charge carrier type, and bias direction. Additionally, we reveal how CISS can be detected in the linear response regime in magnet-free 2T nanodevices, either by forming a chirality-based spin-valve using two or more chiral components or by Hanle spin precession in devices with a single chiral component. Our results provide operation principles and design guidelines for chirality-based spintronic nanodevices and technologies.
| S-EPMC7458476 | biostudies-literature