Bioinspired surfaces for turbulent drag reduction.
Ontology highlight
ABSTRACT:
SUBMITTER: Golovin KB
PROVIDER: S-EPMC4928507 | biostudies-other | 2016 Aug
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Simulations and experiments at low Reynolds numbers have suggested that skin-friction drag generated by turbulent fluid flow over a surface can be decreased by oscillatory motion in the surface, with the amount of drag reduction predicted to decline with increasing Reynolds number. Here, we report direct measurements of substantial drag reduction achieved by using spanwise surface oscillations at high friction Reynolds numbers ([Formula: see text]) up to 12,800. The drag reduction occurs via two distinct physical pathways. The first pathway, as studied previously, involves actuating the surface at frequencies comparable to those of the small-scale eddies that dominate turbulence near the surface. We show that this strategy leads to drag reduction levels up to 25% at [Formula: see text] = 6,000, but with a power cost that exceeds any drag-reduction savings. The second pathway is new, and it involves actuation at frequencies comparable to those of the large-scale eddies farther from the surface. This alternate pathway produces drag reduction of 13% at [Formula: see text] = 12,800. It requires significantly less power and the drag reduction grows with Reynolds number, thereby opening up potential new avenues for reducing fuel consumption by transport vehicles and increasing power generation by wind turbines.
| S-EPMC8490469 | biostudies-literature
Project description:Superwetting surfaces are widely used in many engineering fields for reducing energy and resistance loss. A facile and efficient method using laser etching has been used to fabricate and control superwettable drag reduction surfaces. Inspired by the self-cleaning theory of lotus leaves, we propose controllable patterned bionic superhydrophobic surfaces (BSSs) simulating the uneven micro/nanostructures of lotus leaves. The superhydrophobicity and drag reduction ratios at low velocities are highly improved using a laser ablation method on metal substrates. However, unstable air layers trapped on superhydrophobic surfaces are usually cut away by a high-velocity flow, which greatly reduces the drag reduction performance. The fabricated bionic superhydrophobic/hydrophilic surfaces (BSHSs) with alternated hydrophilic strips can build a large surface energy barrier to bind the three-phase contact line. It maintains the stable drag reduction by capturing the air bubbles attached to the hydrophilic strips at a high velocity. Three-dimensional simulation analysis and equipment to measure the weak friction of a self-assembled solid-liquid interface are used to explain the drag reduction mechanism and measure the drag reduction ratios at different flow speeds. BSSs achieve an improved drag reduction effect (maximum 52.76%) at a low velocity (maximum 1.5568 m/s). BSHSs maintain an improved and steady drag reduction effect at high speed. The drag reduction ratios can be maintained at about 30% at high speed, with a maximum value of 4.448 m/s. This research has broad application prospects in energy saving, liquid directional transportation, and shipping due to their robust superhydrophobic properties and stable drag reduction effect.
| S-EPMC8771958 | biostudies-literature
Project description:The high cost of synthetic polymers has been a key impediment limiting the widespread adoption of polymer drag reduction techniques in large-scale engineering applications, such as marine drag reduction. To address consumable cost constraints, we investigate the use of high molar mass biopolysaccharides, present in the mucilaginous epidermis of plant seeds, as inexpensive drag reducers in large Reynolds number turbulent flows. Specifically, we study the aqueous mucilage extracted from flax seeds (Linum usitatissimum) and compare its drag reduction efficacy to that of poly(ethylene oxide) or PEO, a common synthetic polymer widely used as a drag reducing agent in aqueous flows. Macromolecular and rheological characterisation confirm the presence of high molar mass (?2 MDa) polysaccharides in the extracted mucilage, with an acidic fraction comprising negatively charged chains. Frictional drag measurements, performed inside a bespoke Taylor-Couette apparatus, show that the as-extracted mucilage has comparable drag reduction performance under turbulent flow conditions as aqueous PEO solutions, while concurrently offering advantages in terms of raw material cost, availability, and bio-compatibility. Our results indicate that plant-sourced mucilage can potentially serve as a cost-effective and eco-friendly substitute for synthetic drag reducing polymers in large scale turbulent flow applications.
| S-EPMC6892878 | biostudies-literature
Project description:Shark skin-inspired riblets have represented the tremendous potential for drag reduction (DR) and antifouling in submarine, ship, and so on. Most studies simplified the complex denticle embedded in the shark skin into the single-stage riblet with uniform parameters, ignoring the influence of riblet height gradient and material deformation on DR and antifouling. In the present study, flexible multistage gradient riblets (MSGRs) with varied heights were proposed, and their DR and antifouling effects were investigated by the experiment and numerical simulation. The experimental results showed that the maximum DR rate of flexible MSGRs with an elastic modulus of 4.592 MPa could reach 16.8% at a flow velocity of 0.5 m/s. Moreover, the dynamic adhesion measurement indicated a reduction by 69.6% of the adhesion area of Chlorella vulgaris on the flexible MSGR surface. The results identified that flexible MSGRs with low surface energy could generate steady high- and low-velocity streaks and alter the flow state of the fluid, thus lessening the average velocity gradient near the wall and the adhering selectivity of pollutants in riblet and achieving synergistic DR and efficient antifouling. Taken together, the proposed flexible MSGR surface holds promise for reducing surface friction and inhibiting particle attachment in engineering applications.
| S-EPMC9996761 | biostudies-literature
Project description:Skin friction drag contributes a major portion of the total drag for small and large water vehicles at high Reynolds number (Re). One emerging approach to reducing drag is to use superhydrophobic surfaces to promote slip boundary conditions. However, the air layer or "plastron" trapped on submerged superhydrophobic surfaces often diminishes quickly under hydrostatic pressure and/or turbulent pressure fluctuations. We use active heating on a superhydrophobic surface to establish a stable vapor layer or "Leidenfrost" state at a relatively low superheat temperature. The continuous film of water vapor lubricates the interface, and the resulting slip boundary condition leads to skin friction drag reduction on the inner rotor of a custom Taylor-Couette apparatus. We find that skin friction can be reduced by 80 to 90% relative to an unheated superhydrophobic surface for Re in the range 26,100 ≤ Re ≤ 52,000. We derive a boundary layer and slip theory to describe the hydrodynamics in the system and show that the plastron thickness is h = 44 ± 11 μm, in agreement with expectations for a Leidenfrost surface.
| S-EPMC5065253 | biostudies-literature
Project description:Engineering marvels found throughout the exclusive structural features of biological surfaces have given rise to the progressive development of skin friction drag reduction. However, despite many previous works reporting forward drag reduction where the bio-inspired surface features are aligned with the flow direction, it is still challenging to achieve bidirectional drag reduction for non-morphable surface structures. Inspired by the flounder ctenoid scales characterized by tilted, millimeter-sized oval fins embedded with sub-millimeter spikes, we fabricate a bionic flounder two-tier structural surface (BFTSS) that can remarkably reduce the forward skin friction drag by ηdr = 19%. Even in the backwards direction, where the flow is completely against the tilting direction of surface structures, BFTSS still exhibits a considerable drag reduction of ηdr = 4.2%. Experiments and numerical simulations reveal that this unique bidirectional drag reduction is attributed to synergistic effects of the two-tier structures of BFTSS. The array of oval fins can distort the boundary layer flow and mitigate the viscous shear, whilst the microscale spikes act to promote the flow separation to relieve the pressure gradient in the viscous sublayer. Notably, the pressure gradient relief effect of microscale spikes remains invariant to the flow direction and is responsible for the backward drag reduction as well. The bidirectional drag reduction of BFTSS can be extensively applied in minimizing the energy consumption of ships and underwater vessels, as well as in pipeline transport.
| S-EPMC10046520 | biostudies-literature
Project description:Superhydrophobic surfaces (SHSs) have the potential to achieve large drag reduction for internal and external flow applications. However, experiments have shown inconsistent results, with many studies reporting significantly reduced performance. Recently, it has been proposed that surfactants, ubiquitous in flow applications, could be responsible by creating adverse Marangoni stresses. However, testing this hypothesis is challenging. Careful experiments with purified water already show large interfacial stresses and, paradoxically, adding surfactants yields barely measurable drag increases. To test the surfactant hypothesis while controlling surfactant concentrations with precision higher than can be achieved experimentally, we perform simulations inclusive of surfactant kinetics. These reveal that surfactant-induced stresses are significant at extremely low concentrations, potentially yielding a no-slip boundary condition on the air-water interface (the "plastron") for surfactant concentrations below typical environmental values. These stresses decrease as the stream-wise distance between plastron stagnation points increases. We perform microchannel experiments with SHSs consisting of stream-wise parallel gratings, which confirm this numerical prediction, while showing near-plastron velocities significantly slower than standard surfactant-free predictions. In addition, we introduce an unsteady test of surfactant effects. When we rapidly remove the driving pressure following a loading phase, a backflow develops at the plastron, which can only be explained by surfactant gradients formed in the loading phase. This demonstrates the significance of surfactants in deteriorating drag reduction and thus the importance of including surfactant stresses in SHS models. Our time-dependent protocol can assess the impact of surfactants in SHS testing and guide future mitigating designs.
| S-EPMC5514732 | biostudies-literature
Project description:Drag reduction has become a serious issue in recent years in terms of energy conservation and environmental protection. Among diverse approaches for drag reduction, superhydrophobic surfaces have been mainly researched due to their high drag reducing efficiency. However, due to limited lifetime of plastron (i.e., air pockets) on superhydrophobic surfaces in underwater, the instability of dewetted surfaces has been a sticking point for practical applications. This work presents a breakthrough in improving the underwater stability of superhydrophobic surfaces by optimizing nanoscale surface structures using SiC/Si interlocked structures. These structures have an unequaled stability of underwater superhydrophobicity and enhance drag reduction capabilities,with a lifetime of plastron over 18 days and maximum velocity reduction ratio of 56%. Furthermore, through photoelectrochemical water splitting on a hierarchical SiC/Si nanostructure surface, the limited lifetime problem of air pockets was overcome by refilling the escaping gas layer, which also provides continuous drag reduction effects.
| S-EPMC4837397 | biostudies-literature
Project description:Over the years, different approaches to obtaining antireflective surfaces have been explored, such as using index-matching, interference, or micro- and nanostructures. Structural super black colors are ubiquitous in nature, and biomimicry thus constitutes an interesting way to develop antireflective surfaces. Moth-eye nanostructures, for example, are well known and have been successfully replicated using micro- and nanofabrication. However, other animal species, such as birds of paradise and peacock spiders, have evolved to display larger structures with antireflective features. In peacock spiders, the antireflective properties of their super black patches arise from relatively simple microstructures with lens-like shapes organized in tightly packed hexagonal arrays, which makes them a good candidate for cheap mass replication techniques. In this paper, we present the fabrication and characterization of antireflective microarrays inspired by the peacock spider's super black structures encountered in nature. Firstly, different microarrays 3D models are generated from a surface equation. Secondly, the arrays are fabricated in a polyacrylate resin by super-resolution 3D printing using two-photon polymerization. Thirdly, the resulting structures are inspected using a scanning electron microscope. Finally, the reflectance and transmittance of the printed structures are characterized at normal incidence with a dedicated optical setup. The bioinspired microlens arrays display excellent antireflective properties, with a measured reflectance as low as 0.042 ± 0.004% for normal incidence, a wavelength of 550 nm, and a collection angle of 14.5°. These values were obtained using a tightly-packed array of slightly pyramidal lenses with a radius of 5 µm and a height of 10 µm.
| S-EPMC8470586 | biostudies-literature
Project description:Superhydrophobic surfaces (SHSs) have the potential to reduce drag at solid boundaries. However, multiple independent studies have recently shown that small amounts of surfactant, naturally present in the environment, can induce Marangoni forces that increase drag, at least in the laminar regime. To obtain accurate drag predictions, one must solve the mass, momentum, bulk surfactant and interfacial surfactant conservation equations. This requires expensive simulations, thus preventing surfactant from being widely considered in SHS studies. To address this issue, we propose a theory for steady, pressure-driven, laminar, two-dimensional flow in a periodic SHS channel with soluble surfactant. We linearise the coupling between flow and surfactant, under the assumption of small concentration, finding a scaling prediction for the local slip length. To obtain the drag reduction and interfacial shear, we find a series solution for the velocity field by assuming Stokes flow in the bulk and uniform interfacial shear. We find how the slip and drag depend on the nine dimensionless groups that together characterize the surfactant transport near SHSs, the gas fraction and the normalized interface length. Our model agrees with numerical simulations spanning orders of magnitude in each dimensionless group. The simulations also provide the constants in the scaling theory. Our model significantly improves predictions relative to a surfactant-free one, which can otherwise overestimate slip and underestimate drag by several orders of magnitude. Our slip length model can provide the boundary condition in other simulations, thereby accounting for surfactant effects without having to solve the full problem.
| S-EPMC6894944 | biostudies-literature