Dataset Information

Plasmonic detection and visualization of directed adsorption of charged single nanoparticles to patterned surfaces.

ABSTRACT: It has recently been shown that surface plasmon microscopy (SPM) allows single nanoparticles (NPs) on sensor surfaces to be detected and analyzed. The authors have applied this technique to study the adsorption of single metallic and plastic NPs. Binding of gold NPs (40, 60 and 100 nm in size) and of 100 nm polystyrene NPs to gold surfaces modified by differently ?-functionalized alkyl thiols was studied first. Self-assembled monolayers (SAM) with varying terminal functions including amino, carboxy, oligo(ethylene glycol), methyl, or trimethylammonium groups were deposited on gold films to form surfaces possessing different charge and hydrophobicity. The affinity of NPs to these surfaces depends strongly on the type of coating. SAMs terminated with trimethylammonium groups and carboxy group display highly different affinity and therefore were preferred when creating patterned charged surfaces. Citrate-stabilized gold NPs and sulfate-terminated polystyrene NPs were used as negatively charged NPs, while branched polyethylenimine-coated silver NPs were used as positively charged NPs. It is shown that the charged patterned areas on the gold films are capable of selectively adsorbing oppositely charged NPs that can be detected and analyzed with an ~1 ng?mL-1 detection limit. Graphical abstractSelf-assembled monolayers of ?-functionalized alkyl thiols were deposited on a gold layer of a patterned sensor array. The charge-selective binding of single nanoparticles to such surfaces was registered by wide-field surface plasmon microscopy.

SUBMITTER: Scherbahn V

PROVIDER: S-EPMC5061841 | biostudies-other | 2016

REPOSITORIES: biostudies-other

ACCESS DATA

Publications

Plasmonic detection and visualization of directed adsorption of charged single nanoparticles to patterned surfaces.

Scherbahn Vitali V Nizamov Shavkat S Mirsky Vladimir M VM

Mikrochimica acta 20161004 11

It has recently been shown that surface plasmon microscopy (SPM) allows single nanoparticles (NPs) on sensor surfaces to be detected and analyzed. The authors have applied this technique to study the adsorption of single metallic and plastic NPs. Binding of gold NPs (40, 60 and 100 nm in size) and of 100 nm polystyrene NPs to gold surfaces modified by differently ω-functionalized alkyl thiols was studied first. Self-assembled monolayers (SAM) with varying terminal functions including amino, carb ...[more]

PMID: 27795582

Similar Datasets

Project description:Directed concentrating of micro- and nanoparticles via laser-generated plasmonic microbubbles in a liquid environment is an emerging technology. For effective heating, visible light has been primarily employed in existing demonstrations. In this paper, we demonstrate a new plasmonic platform based on nanoporous gold disk (NPGD) array. Thanks to the highly tunable localized surface plasmon resonance of the NPGD array, microbubbles of controlled size can be generated by near-infrared (NIR) light. Using NIR light provides several key advantages over visible light in less interference with standard microscopy and fluorescence imaging, preventing fluorescence photobleaching, less susceptible to absorption and scattering in turbid biological media, and much reduced photochemistry, phototoxicity, and so forth. The large surface-to-volume ratio of NPGD further facilitates the heat transfer from these gold nanoheaters to the surroundings. While the microbubble is formed, the surrounding liquid circulates and direct microparticles randomly dispersed in the liquid to the bottom NPGD surface, which can be made to yield a unique collection of 3D hollow dome microstructures with bubbles larger than 5 μm. Such capability can also be employed in concentrating suspended colloidal nanoparticles at desirable sites and with the preferred configuration enhancing the sensor performance. Specifically, the interaction among concentrated nanoparticles and their interactions with the underlying substrate have been investigated for the first time. These collections have been characterized using optical microscopy, scanning electron microscopy, hyperspectral localized surface plasmon resonance imaging, and hyperspectral Raman imaging. In addition to various micro- and nanoparticles, the plasmonic microbubbles are also shown to collect biological cells and extracellular nanovesicles such as exosomes. By using a spatial light modulator to project the laser in arbitrary patterns, parallel concentrating can be achieved to fabricate an array of clusters.

Project description:Silicon (Si) is suggested to be an important/essential nutrient for bone and connective tissue health. Silicon-substituted hydroxyapatite (Si-HA) has silicate ions incorporated into its lattice structure and was developed to improve attachment to bone and increase new bone formation. Here we investigated the direct adsorption of silicate species onto an HA coated surface as a cost effective method of incorporating silicon on to HA surfaces for improved implant osseointegration, and determined changes in surface characteristics and osteoblast cell adhesion. Plasma-sprayed HA-coated stainless steel discs were incubated in silica dispersions of different concentrations (0-42 mM Si), at neutral pH for 12 h. Adsorbed Si was confirmed by XPS analysis and quantified by ICP-OES analysis following release from the HA surface. Changes in surface characteristics were determined by AFM and measurement of surface wettability. Osteoblast cell adhesion was determined by vinculin plaque staining. Maximum Si adsorption to the HA coated disc occurred after incubation in the 6 mM silica dispersion and decreased progressively with higher silica concentrations, while no adsorption was observed with dispersions below 6 mM Si. Comparison of the Si dispersions that produced the highest and lowest Si adsorption to the HA surface, by TEM-based analysis, revealed an abundance of small amorphous nanosilica species (NSP) of ~1.5 nm in diameter in the 6 mM Si dispersion, with much fewer and larger NSP in the 42 mM Si dispersions. 29Si-NMR confirmed that the NSPs in the 6 mM silica dispersion were polymeric and similar in composition to the larger NSPs in the 42 mM Si dispersion, suggesting that the latter were aggregates of the former. Amorphous NSP adsorbed from the 6 mM dispersion on to a HA-coated disc surface increased the surface's water contact angle by 53°, whereas that adsorbed from the 42 mM dispersion decreased the contact angle by 18°, indicating increased and decreased hydrophobicity, respectively. AFM showed an increase in surface roughness of the 6 mM Si treated surface, which correlated well with an increase in number of vinculin plaques. These findings suggest that NSP of the right size (relative to charge) adsorb readily to the HA surface, changing the surface characteristics and, thus, improving osteoblast cell adhesion. This treatment provides a simple way to modify plasma-coated HA surfaces that may enable improved osseointegration of bone implants.

Dataset Information

Plasmonic detection and visualization of directed adsorption of charged single nanoparticles to patterned surfaces.

Publications

Plasmonic detection and visualization of directed adsorption of charged single nanoparticles to patterned surfaces.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets