Browse
Submit Data
Databases
API
Help

Dataset Information

3 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Low Sound Velocity Contributing to the High Thermoelectric Performance of Ag8SnSe6.

ABSTRACT: Conventional strategies for advancing thermoelectrics by minimizing the lattice thermal conductivity focus on phonon scattering for a short mean free path. Here, a design of slow phonon propagation as an effective approach for high-performance thermoelectrics is shown. Taking Ag8SnSe6 as an example, which shows one of the lowest sound velocities among known thermoelectric semiconductors, the lattice thermal conductivity is found to be as low as 0.2 W m-1 K-1 in the entire temperature range. As a result, a peak thermoelectric figure of merit zT > 1.2 and an average zT as high as ?0.8 are achieved in Nb-doped materials, without relying on a high thermoelectric power factor. This work demonstrates not only a guiding principle of low sound velocity for minimal lattice thermal conductivity and therefore high zT, but also argyrodite compounds as promising thermoelectric materials with weak chemical bonds and heavy constituent elements.

SUBMITTER: Li W

PROVIDER: S-EPMC5102661 | biostudies-other | 2016 Nov

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Publications

Low Sound Velocity Contributing to the High Thermoelectric Performance of Ag8SnSe6.

Li Wen W Lin Siqi S Ge Binghui B Yang Jiong J Zhang Wenqing W Pei Yanzhong Y

Advanced science (Weinheim, Baden-Wurttemberg, Germany) 20160707 11

Conventional strategies for advancing thermoelectrics by minimizing the lattice thermal conductivity focus on phonon scattering for a short mean free path. Here, a design of slow phonon propagation as an effective approach for high-performance thermoelectrics is shown. Taking Ag8SnSe6 as an example, which shows one of the lowest sound velocities among known thermoelectric semiconductors, the lattice thermal conductivity is found to be as low as 0.2 W m-1 K-1 ...[more]

PMID: 27980995

Similar Datasets

Weak electron-phonon coupling contributing to high thermoelectric performance in n-type PbSe.

Project description:PbSe is a surprisingly good thermoelectric material due, in part, to its low thermal conductivity that had been overestimated in earlier measurements. The thermoelectric figure of merit, zT, can exceed 1 at high temperatures in both p-type and n-type PbSe, similar to that found in PbTe. While the p-type lead chalcogenides (PbSe and PbTe) benefit from the high valley degeneracy (12 or more at high temperature) of the valence band, the n-type versions are limited to a valley degeneracy of 4 in the conduction band. Yet the n-type lead chalcogenides achieve a zT nearly as high as the p-type lead chalcogenides. This effect can be attributed to the weaker electron-phonon coupling (lower deformation potential coefficient) in the conduction band as compared with that in the valence band, which leads to higher mobility of electrons compared to that of holes. This study of PbSe illustrates the importance of the deformation potential coefficient of the charge-carrying band as one of several key parameters to consider for band structure engineering and the search for high performance thermoelectric materials.

| S-EPMC3382475 | biostudies-literature

Tailoring Intermolecular Interactions Towards High-Performance Thermoelectric Ionogels at Low Humidity.

Project description:Development of ionic thermoelectric (iTE) materials is of immense interest for efficient heat-to-electricity conversion due to their giant ionic Seebeck coefficient (Si ), but challenges remain in terms of relatively small Si at low humidity, poor stretchability, and ambiguous interaction mechanism in ionogels. Herein, a novel ionogel is reported consisting of polyethylene oxide (PEO), polyethylene oxide-polypropylene oxide-polyethylene oxide (P123), and 1-ethyl-3-methylimidazolium acetate (Emim:OAC). By delicately designing the interactions between ions and polymers, the migration of anions is restricted due to their strong binding with the hydroxyl groups of polymers, while the transport of cations is facilitated through segmental motions due to the increased amorphous regions, thereby leading to enlarged diffusion difference between the cations and anions. Moreover, the plasticizing effect of P123 and Emim:OAC can increase the elongation at break. As a consequence, the ionogel exhibits excellent properties including high Si (18 mV K-1 at relative humidity of 60%), good ionic conductivity (1.1 mS cm-1 ), superior stretchability (787%), and high stability (over 80% retention after 600 h). These findings show a promising strategy to obtain multifunctional iTE materials by engineering the intermolecular interactions and demonstrate the great potential of ionogels for harvesting low-grade heat in human-comfortable humidity environments.

| S-EPMC9284173 | biostudies-literature

High-performance shape-engineerable thermoelectric painting.

Project description:Output power of thermoelectric generators depends on device engineering minimizing heat loss as well as inherent material properties. However, the device engineering has been largely neglected due to the limited flat or angular shape of devices. Considering that the surface of most heat sources where these planar devices are attached is curved, a considerable amount of heat loss is inevitable. To address this issue, here, we present the shape-engineerable thermoelectric painting, geometrically compatible to surfaces of any shape. We prepared Bi2Te3-based inorganic paints using the molecular Sb2Te3 chalcogenidometalate as a sintering aid for thermoelectric particles, with ZT values of 0.67 for n-type and 1.21 for p-type painted materials that compete the bulk values. Devices directly brush-painted onto curved surfaces produced the high output power of 4.0?mW?cm-2. This approach paves the way to designing materials and devices that can be easily transferred to other applications.

| S-EPMC5114615 | biostudies-literature

High-performance thermoelectric nanocomposites from nanocrystal building blocks.

Project description:The efficient conversion between thermal and electrical energy by means of durable, silent and scalable solid-state thermoelectric devices has been a long standing goal. While nanocrystalline materials have already led to substantially higher thermoelectric efficiencies, further improvements are expected to arise from precise chemical engineering of nanoscale building blocks and interfaces. Here we present a simple and versatile bottom-up strategy based on the assembly of colloidal nanocrystals to produce consolidated yet nanostructured thermoelectric materials. In the case study on the PbS-Ag system, Ag nanodomains not only contribute to block phonon propagation, but also provide electrons to the PbS host semiconductor and reduce the PbS intergrain energy barriers for charge transport. Thus, PbS-Ag nanocomposites exhibit reduced thermal conductivities and higher charge carrier concentrations and mobilities than PbS nanomaterial. Such improvements of the material transport properties provide thermoelectric figures of merit up to 1.7 at 850 K.

| S-EPMC4786643 | biostudies-literature

High-Performance Screen-Printed Thermoelectric Films on Fabrics.

Project description:Printing techniques could offer a scalable approach to fabricate thermoelectric (TE) devices on flexible substrates for power generation used in wearable devices and personalized thermo-regulation. However, typical printing processes need a large concentration of binder additives, which often render a detrimental effect on electrical transport of the printed TE layers. Here, we report scalable screen-printing of TE layers on flexible fiber glass fabrics, by rationally optimizing the printing inks consisting of TE particles (p-type Bi0.5Sb1.5Te3 or n-type Bi2Te2.7Se0.3), binders, and organic solvents. We identified a suitable binder additive, methyl cellulose, which offers suitable viscosity for printability at a very small concentration (0.45-0.60?wt.%), thus minimizing its negative impact on electrical transport. Following printing, the binders were subsequently burnt off via sintering and hot pressing. We found that the nanoscale defects left behind after the binder burnt off became effective phonon scattering centers, leading to low lattice thermal conductivity in the printed n-type material. With the high electrical conductivity and low thermal conductivity, the screen-printed TE layers showed high room-temperature ZT values of 0.65 and 0.81 for p-type and n-type, respectively.

| S-EPMC5544726 | biostudies-literature

Tellurium as a high-performance elemental thermoelectric.

Project description:High-efficiency thermoelectric materials require a high conductivity. It is known that a large number of degenerate band valleys offers many conducting channels for improving the conductivity without detrimental effects on the other properties explicitly, and therefore, increases thermoelectric performance. In addition to the strategy of converging different bands, many semiconductors provide an inherent band nestification, equally enabling a large number of effective band valley degeneracy. Here we show as an example that a simple elemental semiconductor, tellurium, exhibits a high thermoelectric figure of merit of unity, not only demonstrating the concept but also filling up the high performance gap from 300 to 700?K for elemental thermoelectrics. The concept used here should be applicable in general for thermoelectrics with similar band features.

| S-EPMC4729895 | biostudies-other

Designing high-performance layered thermoelectric materials through orbital engineering.

Project description:Thermoelectric technology, which possesses potential application in recycling industrial waste heat as energy, calls for novel high-performance materials. The systematic exploration of novel thermoelectric materials with excellent electronic transport properties is severely hindered by limited insight into the underlying bonding orbitals of atomic structures. Here we propose a simple yet successful strategy to discover and design high-performance layered thermoelectric materials through minimizing the crystal field splitting energy of orbitals to realize high orbital degeneracy. The approach naturally leads to design maps for optimizing the thermoelectric power factor through forming solid solutions and biaxial strain. Using this approach, we predict a series of potential thermoelectric candidates from layered CaAl2Si2-type Zintl compounds. Several of them contain nontoxic, low-cost and earth-abundant elements. Moreover, the approach can be extended to several other non-cubic materials, thereby substantially accelerating the screening and design of new thermoelectric materials.

| S-EPMC4786678 | biostudies-literature

Ultra-high performance wearable thermoelectric coolers with less materials.

Project description:Thermoelectric coolers are attracting significant attention for replacing age-old cooling and refrigeration devices. Localized cooling by wearable thermoelectric coolers will decrease the usage of traditional systems, thereby reducing global warming and providing savings on energy costs. Since human skin as well as ambient air is a poor conductor of heat, wearable thermoelectric coolers operate under huge thermally resistive environment. The external thermal resistances greatly influence thermoelectric material behavior, device design, and device performance, which presents a fundamental challenge in achieving high efficiency for on-body applications. Here, we examine the combined effect of heat source/sink thermal resistances and thermoelectric material properties on thermoelectric cooler performance. Efficient thermoelectric coolers demonstrated here can cool the human skin up to 8.2 °C below the ambient temperature (170% higher cooling than commercial modules). Cost-benefit analysis shows that cooling over material volume for our optimized thermoelectric cooler is 500% higher than that of the commercial modules.

| S-EPMC6468009 | biostudies-literature

Specific heat and sound velocity at the relevant competing phase of high-temperature superconductors.

Project description:Recent highly accurate sound velocity measurements reveal a phase transition to a competing phase in YBa2Cu3O6+? that is not identified in available specific heat measurements. We show that this signature is consistent with the universality class of the loop current-ordered state when the free-energy reduction is similar to the superconducting condensation energy, due to the anomalous fluctuation region of such a transition. We also compare the measured specific heat with some usual types of transitions, which are observed at lower temperatures in some cuprates, and find that the upper limit of the energy reduction due to them is about 1/40th the superconducting condensation energy.

| S-EPMC4443351 | biostudies-literature

A Revisit to High Thermoelectric Performance of Single-layer MoS2.

Project description:Both electron and phonon transport properties of single layer MoS2 (SLMoS2) are studied. Based on first-principles calculations, the electrical conductivity of SLMoS2 is calculated by Boltzmann equations. The thermal conductivity of SLMoS2 is calculated to be as high as 116.8?Wm(-1) K(-1) by equilibrium molecular dynamics simulations. The predicted value of ZT is as high as 0.11 at 500?K. As the thermal conductivity could be reduced largely by phonon engineering, there should be a high possibility to enhance ZT in the SLMoS2-based materials.

| S-EPMC4683674 | biostudies-literature