Browse
Submit Data
Databases
API
Help

Dataset Information

12 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Phosphorus-Graphene Nanosheet Hybrids as Lithium-Ion Anode with Exceptional High-Temperature Cycling Stability.

ABSTRACT: A red phosphorus-graphene nanosheet hybrid is reported as an anode material for lithium-ion batteries. Graphene nanosheets form a sea-like, highly electronically conductive matrix, where the island-like phosphorus particles are dispersed. Benefiting from this structure and properties of phosphorus, the hybrid delivers high initial capacity and exhibits promising retention at 60 °C.

SUBMITTER: Yu Z

PROVIDER: S-EPMC5115279 | biostudies-other | 2015 Feb

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Publications

Phosphorus-Graphene Nanosheet Hybrids as Lithium-Ion Anode with Exceptional High-Temperature Cycling Stability.

Yu Zhaoxin Z Song Jiangxuan J Gordin Mikhail L ML Yi Ran R Tang Duihai D Wang Donghai D

Advanced science (Weinheim, Baden-Wurttemberg, Germany) 20150128 1-2

<b>A red phosphorus-graphene nanosheet hybrid</b> is reported as an anode material for lithium-ion batteries. Graphene nanosheets form a sea-like, highly electronically conductive matrix, where the island-like phosphorus particles are dispersed. Benefiting from this structure and properties of phosphorus, the hybrid delivers high initial capacity and exhibits promising retention at 60 °C. ...[more]

PMID: 27980903

Similar Datasets

Nitrogen and Phosphorus Dual-Doped Multilayer Graphene as Universal Anode for Full Carbon-Based Lithium and Potassium Ion Capacitors.

Project description:Lithium/potassium ion capacitors (LICs/PICs) have been proposed to bridge the performance gap between high-energy batteries and high-power capacitors. However, their development is hindered by the choice, electrochemical performance, and preparation technique of the battery-type anode materials. Herein, a nitrogen and phosphorus dual-doped multilayer graphene (NPG) material is designed and synthesized through an arc discharge process, using low-cost graphite and solid nitrogen and phosphorus sources. When employed as the anode material, NPG exhibits high capacity, remarkable rate capability, and stable cycling performance in both lithium and potassium ion batteries. This excellent electrochemical performance is ascribed to the synergistic effect of nitrogen and phosphorus doping, which enhances the electrochemical conductivity, provides a higher number of ion storage sites, and leads to increased interlayer spacing. Full carbon-based NPG‖LiPF6‖active carbon (AC) LICs and NPG‖KPF6‖AC PICs are assembled and show excellent electrochemical performance, with competitive energy and power densities. This work provides a route for the large-scale production of dual-doped graphene as a universal anode material for high-performance alkali ion batteries and capacitors.

| S-EPMC7770933 | biostudies-literature

A novel graphene-polysulfide anode material for high-performance lithium-ion batteries.

Project description:We report a simple and efficient approach for fabrication of novel graphene-polysulfide (GPS) anode materials, which consists of conducting graphene network and homogeneously distributed polysulfide in between and chemically bonded with graphene sheets. Such unique architecture not only possesses fast electron transport channels, shortens the Li-ion diffusion length but also provides very efficient Li-ion reservoirs. As a consequence, the GPS materials exhibit an ultrahigh reversible capacity, excellent rate capability and superior long-term cycling performance in terms of 1600, 550, 380 mAh g(-1) after 500, 1300, 1900 cycles with a rate of 1, 5 and 10 A g(-1) respectively. This novel and simple strategy is believed to work broadly for other carbon-based materials. Additionally, the competitive cost and low environment impact may promise such materials and technique a promising future for the development of high-performance energy storage devices for diverse applications.

| S-EPMC3730167 | biostudies-literature

Preparation of Advanced CuO Nanowires/Functionalized Graphene Composite Anode Material for Lithium Ion Batteries.

Project description:The copper oxide (CuO) nanowires/functionalized graphene (f-graphene) composite material was successfully composed by a one-pot synthesis method. The f-graphene synthesized through the Birch reduction chemistry method was modified with functional group "-(CH?)?COOH", and the CuO nanowires (NWs) were well dispersed in the f-graphene sheets. When used as anode materials in lithium-ion batteries, the composite exhibited good cyclic stability and decent specific capacity of 677 mA·h·g-1 after 50 cycles. CuO NWs can enhance the lithium-ion storage of the composites while the f-graphene effectively resists the volume expansion of the CuO NWs during the galvanostatic charge/discharge cyclic process, and provide a conductive paths for charge transportation. The good electrochemical performance of the synthesized CuO/f-graphene composite suggests great potential of the composite materials for lithium-ion batteries anodes.

| S-EPMC5344618 | biostudies-literature

Self-supporting Co3O4/Graphene Hybrid Films as Binder-free Anode Materials for Lithium Ion Batteries.

Project description:A self-supporting Co3O4/graphene hybrid film has been constructed via vacuum filtration of Co(OH)2 nanosheet and graphene, followed by a two-step thermal treatment. Within the hybrid film, Co3O4 nanoparticles with size of 40~60?nm uniformly in-situ grew on the surface of graphene, forming a novel porous and interleaved structure with strong interactions between Co3O4 nanoparticles and graphene. Such fascinating microstructures can greatly facilitate interfacial electron transportation and accommodate the volume changes upon Li ions insertion and extraction. Consequently, the binder-less hybrid film demonstrated extremely high reversible capacity (1287.7?mAh g-1 at 0.2?A g-1), excellent cycling stability and rate capability (1110 and 800?mAh g-1 at 0.5 and 1.0?A g-1, respectively).

| S-EPMC5816628 | biostudies-literature

High rate and stable cycling of lithium metal anode.

Project description:Lithium metal is an ideal battery anode. However, dendrite growth and limited Coulombic efficiency during cycling have prevented its practical application in rechargeable batteries. Herein, we report that the use of highly concentrated electrolytes composed of ether solvents and the lithium bis(fluorosulfonyl)imide salt enables the high-rate cycling of a lithium metal anode at high Coulombic efficiency (up to 99.1%) without dendrite growth. With 4?M lithium bis(fluorosulfonyl)imide in 1,2-dimethoxyethane as the electrolyte, a lithium|lithium cell can be cycled at 10?mA?cm(-2) for more than 6,000 cycles, and a copper|lithium cell can be cycled at 4?mA?cm(-2) for more than 1,000 cycles with an average Coulombic efficiency of 98.4%. These excellent performances can be attributed to the increased solvent coordination and increased availability of lithium ion concentration in the electrolyte. Further development of this electrolyte may enable practical applications for lithium metal anode in rechargeable batteries.

| S-EPMC4346622 | biostudies-literature

Lithium Ion Battery Anode Aging Mechanisms.

Project description:Degradation mechanisms such as lithium plating, growth of the passivated surface film layer on the electrodes and loss of both recyclable lithium ions and electrode material adversely affect the longevity of the lithium ion battery. The anode electrode is very vulnerable to these degradation mechanisms. In this paper, the most common aging mechanisms occurring at the anode during the operation of the lithium battery, as well as some approaches for minimizing the degradation are reviewed.

| S-EPMC5452304 | biostudies-other

Synergistic Effect of a Defect-Free Graphene Nanostructure as an Anode Material for Lithium Ion Batteries.

Project description:Graphene nanosheets have been among the most promising candidates for a high-performance anode material to replace graphite in lithium ion batteries (LIBs). Studies in this area have mainly focused on nanostructured electrodes synthesized by graphene oxide (GO) or reduced graphene oxide (rGO) and surface modifications by a chemical treatment. Herein, we propose a cost-effective and reliable route for generating a defect-free, nanoporous graphene nanostructure (df-GNS) through the sequential insertion of pyridine into a potassium graphite intercalation compound (K-GIC). The as-prepared df-GNS preserves the intrinsic property of graphene without any crystal damage, leading to micro-/nano-porosity (microporosity: ~10-50 µm, nanoporosity: ~2-20 nm) with a significantly large specific surface area. The electrochemical performance of the df-GNS as an anode electrode was assessed and showed a notably enhanced capacity, rate capability, and cycle stability, without fading in capacity or decaying. This is because of the optimal porosity, with perfect preservation of the graphene crystal, allowing faster ion access and a high amount of electron pathways onto the electrode. Therefore, our work will be very helpful for the development of anode and cathode electrodes with higher energy and power performance requirements.

| S-EPMC7023017 | biostudies-literature

Bulk antimony sulfide with excellent cycle stability as next-generation anode for lithium-ion batteries.

Project description:Nanomaterials as anode for lithium-ion batteries (LIB) have gained widespread interest in the research community. However, scaling up and processibility are bottlenecks to further commercialization of these materials. Here, we report that bulk antimony sulfide with a size of 10-20 ?m exhibits a high capacity and stable cycling of 800 mAh g(-1). Mechanical and chemical stabilities of the electrodes are ensured by an optimal electrode-electrolyte system design, with a polyimide-based binder together with fluoroethylene carbonate in the electrolyte. The polyimide binder accommodates the volume expansion during alloying process and fluoroethylene carbonate suppresses the increase in charge transfer resistance of the electrodes. We observed that particle size is not a major factor affecting the charge-discharge capacities, rate capability and stability of the material. Despite the large particle size, bulk antimony sulfide shows excellent rate performance with a capacity of 580 mAh g(-1) at a rate of 2000 mA g(-1).

| S-EPMC3972503 | biostudies-literature

Lithium lanthanum titanate perovskite as an anode for lithium ion batteries.

Project description:Conventional lithium-ion batteries embrace graphite anodes which operate at potential as low as metallic lithium, subjected to poor rate capability and safety issues. Among possible alternatives, oxides based on titanium redox couple, such as spinel Li4Ti5O12, have received renewed attention. Here we further expand the horizon to include a perovskite structured titanate La0.5Li0.5TiO3 into this promising family of anode materials. With average potential of around 1.0?V vs. Li+/Li, this anode exhibits high specific capacity of 225?mA?h?g-1 and sustains 3000 cycles involving a reversible phase transition. Without decrease the particle size from micro to nano scale, its rate performance has exceeded the nanostructured Li4Ti5O12. Further characterizations and calculations reveal that pseudocapacitance dictates the lithium storage process and the favorable ion and electronic transport is responsible for the rate enhancement. Our findings provide fresh impetus to the identification and development of titanium-based anode materials with desired electrochemical properties.

| S-EPMC7359355 | biostudies-literature

Bismuth Oxide: A New Lithium-Ion Battery Anode.

Project description:Bismuth oxide directly grown on nickel foam (p-Bi2O3/Ni) was prepared by a facile polymer-assisted solution approach and was used directly as a lithium-ion battery anode for the first time. The Bi2O3 particles were covered with thin carbon layers, forming network-like sheets on the surface of the Ni foam. The binder-free p-Bi2O3/Ni shows superior electrochemical properties with a capacity of 668 mAh/g at a current density of 800 mA/g, which is much higher than that of commercial Bi2O3 powder (c-Bi2O3) and Bi2O3 powder prepared by the polymer-assisted solution method (p-Bi2O3). The good performance of p-Bi2O3/Ni can be attributed to higher volumetric utilization efficiency, better connection of active materials to the current collector, and shorter lithium ion diffusion path.

| S-EPMC3884641 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data