{225}? habit planes in martensitic steels: from the PTMC to a continuous model.
Ontology highlight
ABSTRACT:
SUBMITTER: Baur AP
PROVIDER: S-EPMC5247700 | biostudies-other | 2017 Jan
REPOSITORIES: biostudies-other
Publications
{225}<sub>γ</sub> habit planes in martensitic steels: from the PTMC to a continuous model.
Baur Annick P AP Cayron Cyril C Logé Roland E RE
Scientific reports 20170120
Fine twinned microstructures with {225}<sub>γ</sub> habit planes are commonly observed in martensitic steels. The present study shows that an equibalanced combination of twin-related variants associated to the Kurdjumov-Sachs orientation relationship is equivalent to the Bowles and Mackenzie's version of the PTMC for this specific {225}<sub>γ</sub> case. The distortion associated to the Kurdjumov-Sachs orientation relationship results from a continuous modeling of the FCC-BCC transformation. Thu ...[more]
Similar Datasets
Project description:Hydrogen is well known to embrittle high-strength steels and impair their corrosion resistance. One of the most attractive methods to mitigate hydrogen embrittlement employs nanoprecipitates, which are widely used for strengthening, to trap and diffuse hydrogen from enriching at vulnerable locations within the materials. However, the atomic origin of hydrogen-trapping remains elusive, especially in incoherent nanoprecipitates. Here, by combining in-situ scanning Kelvin probe force microscopy and aberration-corrected transmission electron microscopy, we unveil distinct scenarios of hydrogen-precipitate interaction in a high-strength low-alloyed martensitic steel. It is found that not all incoherent interfaces are trapping hydrogen; some may even exclude hydrogen. Atomic-scale structural and chemical features of the very interfaces suggest that carbon/sulfur vacancies on the precipitate surface and tensile strain fields in the nearby matrix likely determine the hydrogen-trapping characteristics of the interface. These findings provide fundamental insights that may lead to a better coupling of precipitation-strengthening strategy with hydrogen-insensitive designs.
| S-EPMC9256589 | biostudies-literature
Project description:Martensitic steels are tempered to increase the toughness of the metastable martensite, which is brittle in the as-quenched state, and to achieve a more stable microstructure. During the tempering of steels, several particular overlapping effects can arise. Classical dilatometric investigations can only detect effects by monitoring the integral length change of the sample. Additional in-situ diffractometry allowed a differentiation of the individual effects such as transformation of retained austenite and formation of cementite during tempering. Additionally, the lattice parameters of martensite and therefrom the tetragonality was analyzed. Two low-alloy steels with carbon contents of 0.4 and 1.0 wt.% and a high-alloy 5Cr-1Mo-steel with 0.4 wt.% carbon were investigated by dilatometry and in-situ diffractometry. In this paper, microstructural effects during tempering of the investigated steels are discussed by a comparative study of dilatometric and diffractometric experiments. The influence of the chemical composition on the tempering behavior is illustrated by comparing the determined effects of the three steels. The kinetics of tempering is similar for the low-alloy steels and shifted to much higher temperatures for the high-alloy steel. During tempering, the tetragonality of martensite in the steel with 1.0 wt% carbon shifts towards a low carbon behavior, as in the steels with 0.4 wt.% carbon.
| S-EPMC7696766 | biostudies-literature
Project description:Postulating that the brain performs approximate Bayesian inference generates principled and empirically testable models of neuronal function-the subject of much current interest in neuroscience and related disciplines. Current formulations address inference and learning under some assumed and particular model. In reality, organisms are often faced with an additional challenge-that of determining which model or models of their environment are the best for guiding behavior. Bayesian model averaging-which says that an agent should weight the predictions of different models according to their evidence-provides a principled way to solve this problem. Importantly, because model evidence is determined by both the accuracy and complexity of the model, optimal inference requires that these be traded off against one another. This means an agent's behavior should show an equivalent balance. We hypothesize that Bayesian model averaging plays an important role in cognition, given that it is both optimal and realizable within a plausible neuronal architecture. We outline model averaging and how it might be implemented, and then explore a number of implications for brain and behavior. In particular, we propose that model averaging can explain a number of apparently suboptimal phenomena within the framework of approximate (bounded) Bayesian inference, focusing particularly upon the relationship between goal-directed and habitual behavior.
| S-EPMC4071291 | biostudies-literature
Project description:Binge-watching has become one of the most popular ways for people to spend their free time. Binge-watching refers to watching more than two episodes of a television show in a single sitting. This pattern of behavior can be seen in people of a wide range of ages, but it is particularly widespread among people of millennial age and younger. In this study, we propose a model that explains binge-watching engagement by theorizing and testing the association of social influence on perceived usefulness, regret on the continuous intention of binge-watching, and habit on continuous intention and binge-watching engagement. The authors evaluated the model using data collected from 225 respondents. The results supported the proposed hypotheses and confirmed that regret does not neutralize the positive - and strong - effect of perceived usefulness and habit on binge-watching.
| S-EPMC10955278 | biostudies-literature
Project description:Materials can be made strong, but as such they are often brittle and prone to fracture when under stress. Inspired by the exceptionally strong and ductile structure of byssal threads found in certain mussels, we have designed and manufactured a multi-hierarchical steel, based on an inexpensive austenitic stainless steel, which defeats this "conflict" by possessing both superior strength and ductility. These excellent mechanical properties are realized by structurally introducing sandwich structures at both the macro- and nano-scales, the latter via an isometric, alternating, dual-phase crystal phases comprising nano-band austenite and nano-lamellar martensite, without change in chemical composition. Our experiments (transmission and scanning electron microscopy, electron back-scattered diffraction, nano-indentation and tensile tests) and micromechanics simulation results reveal a synergy of mechanisms underlying such exceptional properties. This synergy is key to the development of vastly superior mechanical properties, and may provide a unique strategy for the future development of new super strong and tough (damage-tolerant), lightweight and inexpensive structural materials.
| S-EPMC5865137 | biostudies-literature
Project description:Hardenability is one of the most basic criteria influencing the formulation of the heat treatment process and steel selection. Therefore, it is of great engineering value to calculate the hardenability curves rapidly and accurately without resorting to any laborious and costly experiments. However, generating a high-precision computational model for steels with different hardenability remains a challenge. In this study, a combined machine learning (CML) model including k-nearest neighbor and random forest is established to predict the hardenability curves of non-boron steels solely on the basis of chemical compositions: (i) random forest is first applied to classify steel into low- and high-hardenability steel; (ii) k-nearest neighbor and random forest models are then developed to predict the hardenability of low- and high-hardenability steel. Model validation is carried out by calculating and comparing the hardenability curves of five steels using different models. The results reveal that the CML model works well for its distinguished prediction performance with precise classification accuracy (100%), high correlation coefficient (≥0.981), and low mean absolute errors (≤3.6 HRC) and root-mean-square errors (≤3.9 HRC); it performs better than JMatPro and empirical formulas including the ideal critical diameter method and modified nonlinear equation. Therefore, this study demonstrates that the CML model combining material informatics and data-driven machine learning can rapidly and efficiently predict the hardenability curves of non-boron steel, with high prediction accuracy and a wide application range. It can guide process design and machine part selection, reducing the cost of trial and error and accelerating the development of new materials.
| S-EPMC9103254 | biostudies-literature
Project description:Being capable of rapid and complete structure switching, the martensitic phase transitions in molecular crystals are thought to hold a tremendous potential as thermally driven organic actuators. However, the mechanical engineering parlance in the assessment of their performance is not immediately legible to the chemistry research community that starts to explore these materials, and the unavailability of performance indices has precluded molecular crystals from being considered in the device design process. Here, we demonstrate that an organic martensite, hexamethylbenzene, can be used to perform work that is comparable to that of most actuator classes. Millimeter-size single crystals of this material undergo a transition between two forms by uniaxial expansion at a rate of 6.36(2) mm s-1, exerting force in the range 10-100 mN. The force-to-weight ratio of the crystals is on the order of 104 and is superior to that of some living creatures. An actuator performance chart reveals that the performance of this material is close to that of nanomuscles, electrostatic actuators and voice coils, with a strain higher than that of electro/magnetostrictive actuators and ceramic piezoelectrics and stress higher than that of the electroactive polymers, MEMS devices, nanomuscles, voice coils, and some solenoids. Moreover, the crystals of this material are mechanically compliant and can be reversibly bent and shaped to fit the desired application. Altogether, the results point to the untapped potential of molecular crystals as rapid and efficient soft, organic actuators.
| S-EPMC6837004 | biostudies-literature
Project description:The most efficient way to tune microstructures and mechanical properties of metallic alloys lies in designing and using athermal phase transformations. Examples are shape memory alloys and high strength steels, which together stand for 1,500 million tons annual production. In these materials, martensite formation and mechanical twinning are tuned via composition adjustment for realizing complex microstructures and beneficial mechanical properties. Here we report a new phase transformation that has the potential to widen the application window of Ti alloys, the most important structural material in aerospace design, by nanostructuring them via complexion-mediated transformation. This is a reversible martensitic transformation mechanism that leads to a final nanolaminate structure of α″ (orthorhombic) martensite bounded with planar complexions of athermal ω (a-ω, hexagonal). Both phases are crystallographically related to the parent β (BCC) matrix. As expected from a planar complexion, the a-ω is stable only at the hetero-interface.
| S-EPMC5296643 | biostudies-literature
Project description:Improvement of the corrosion resistance capability, surface roughness, shining of stainless-steel surface elements after electrochemical polishing (EP) is one of the most important process characteristics. In this paper, the mechanism, obtained parameters, and results were studied on electropolishing of stainless-steel samples based on the review of the literature. The effects of the EP process parameters, especially current density, temperature, time, and the baths used were presented and compared among different studies. The samples made of stainless steel presented in the articles were analysed in terms of, among other things, surface roughness, resistance to corrosion, microhardness, and chemical composition. All results showed that the EP process greatly improved the analysed properties of the stainless-steel surface elements.
| S-EPMC7321480 | biostudies-literature
Project description:We report the first synthesis of 225Ac (t 1/2 = 10 days) endohedral fullerenes,225Ac@C60. The 225Ac@C60 was produced with a 12 ± 2% efficiency by applying an electrical arc discharge between a source of α-particle emitter 225Ac (∼1 mCi, electroplated on a Pt disk) and a thin coat of "preformed" C60 on an Al disk (C60 thickness of ∼0.25 mg/cm2). After formation by electrical arc discharge, the resulting radiofullerenes on the Al disk were dissolved in toluene under anaerobic conditions and converted to a malonate derivative using the Bingel reaction. Subsequent to repeated washings of the organic phase with dilute acidic solutions to remove exohedral 225Ac, ∼45% of 225Ac activity was retained in the organic phase, which resisted extraction into the aqueous phase. Failure to extract the 225Ac from the organic phase provided definitive evidence that the 225Ac is located inside of the fullerene. The formation of 225Ac@C60 was further confirmed using a classical hot-atom chemistry technique in which the organic phase containing purified endohedral 225Ac@C60 malonate was contacted with fresh dilute acid to repeatedly extract the ionic 4.8 m 221Fr and 45.6 m 213Bi activities (decay daughters of 225Ac), which were released by molecular disruption due to nuclear recoil. The result from the extraction experiments was further supported by a series of thin-layer chromatography and high-pressure liquid chromatography analysis of the organic phase containing 225Ac@C60 or 225Ac@C60 malonate. Taken together, studies show that, like polydentate chelators, single-wall fullerenes are not capable of retaining the 225Ac decay daughters.
| S-EPMC7594009 | biostudies-literature