Microfluidic Patterning of Metal Structures for Flexible Conductors by In Situ Polymer-Assisted Electroless Deposition.
Ontology highlight
ABSTRACT:
SUBMITTER: Liang S
PROVIDER: S-EPMC5323856 | biostudies-other | 2017 Feb
REPOSITORIES: biostudies-other
Publications
Microfluidic Patterning of Metal Structures for Flexible Conductors by In Situ Polymer-Assisted Electroless Deposition.
Liang Suqing S Li Yaoyao Y Zhou Tingjiao T Yang Jinbin J Zhou Xiaohu X Zhu Taipeng T Huang Junqiao J Zhu Julie J Zhu Deyong D Liu Yizhen Y He Chuanxin C Zhang Junmin J Zhou Xuechang X
Advanced science (Weinheim, Baden-Wurttemberg, Germany) 20161101 2
<b>A low-cost, solution-processed, versatile, microfluidic approach</b> is developed for patterning structures of highly conductive metals (e.g., copper, silver, and nickel) on chemically modified flexible polyethylene terephthalate thin films by in situ polymer-assisted electroless metal deposition. This method has significantly lowered the consumption of catalyst as well as the metal plating solution. ...[more]
Similar Datasets
Project description:Embedding liquid metals (LMs) into an elastomer is emerging as a promising strategy for stretchable conductors. Existing manufacturing techniques are struggling between spatial resolution and process complexity and are limited to chemically resistant substrates. Here, we report on a hybrid process combining stencil lithography and centrifugal force-assisted patterning of liquid metal for the development of LM-based stretchable conductors. The selective wetting behavior of oxide-removed eutectic gallium-indium (EGaIn) on metal patterns defined by stencil lithography enables micrometer scale LM patterns on an elastomeric substrate. Stencil lithography allows for defining metal regions without harsh chemical treatments, making it suitable for a wide range of substrates. Microscale LM patterns are achieved by efficiently removing the excess material by the centrifugal forces experienced from spinning the substrate. The proposed approach allows for the creation of LM patterns with a line width as small as 2 μm on a stretchable poly(dimethylsiloxane) (PDMS) substrate. The electrical measurement results show that the fabricated EGaIn devices can endure 40% mechanical strain over several thousands of cycles. Furthermore, a stencil design using microbridges is proposed to address the mechanical stability issue in stencil lithography. An EGaIn conductor with a serpentine structure and an interdigitated capacitor are fabricated and characterized. The results demonstrate that the patterned serpentine conductors retain their functionality with applied mechanical strain up to 80%. The performance of the interdigitated capacitors upon applied strain is in good agreement with the theoretical estimation. Finally, we demonstrate our approach also on poly(octamethylene maleate (anhydride) citrate) (POMaC) substrates to broaden the use of the proposed method to not only flexible and stretchable but also biodegradable substrates, opening a way for in vivo transient microsystem engineering. The work presented here provides a versatile and reliable approach for manufacturing stretchable conductors.
| S-EPMC8717634 | biostudies-literature
Project description:Stretchable, biocompatible devices can bridge electronics and biology. However, most stretchable conductors for such devices are toxic, costly, and regularly break/degrade after several large deformations. Here we show printable, highly stretchable, and biocompatible metal-polymer conductors by casting and peeling off polymers from patterned liquid metal particles, forming surface-embedded metal in polymeric hosts. Our printable conductors present good stretchability (2,316 S/cm at a strain of 500%) and repeatability (?R/R <3% after 10,000 cycles), which can satisfy most electrical applications in extreme deformations. This strategy not only overcomes large surface tension of liquid metal but also avoids the undesirable sintering of its particles by stress in deformations, such that stretchable conductors can form on various substrates with high resolution (15 ?m), high throughput (?2,000 samples/hour), and low cost (one-quarter price of silver). We use these conductors for stretchable circuits, motion sensors, wearable glove keyboards, and electroporation of live cells.
| S-EPMC6146547 | biostudies-literature
Project description:A one-step strategy for fabricating flexible conductors via phase separation is proposed, wherein, the liquid metal was implanted into polydimethylsiloxane, whose viscosity was changed using hexane. Such self-encapsulating composite exhibited good electronic and mechanical stability under mechanical cycles with no significant leaking of droplets during the testing process.
| S-EPMC9074125 | biostudies-literature
Project description:Many superionic mixed ionic-electronic conductors with a liquid-like sublattice have been identified as high efficiency thermoelectric materials, but their applications are limited due to the possibility of decomposition when subjected to high electronic currents and large temperature gradients. Here, through systematically investigating electromigration in copper sulfide/selenide thermoelectric materials, we reveal the mechanism for atom migration and deposition based on a critical chemical potential difference. Then, a strategy for stable use is proposed: constructing a series of electronically conducting, but ion-blocking barriers to reset the chemical potential of such conductors to keep it below the threshold for decomposition, even if it is used with high electric currents and/or large temperature differences. This strategy not only opens the possibility of using such conductors in thermoelectric applications, but may also provide approaches to engineer perovskite photovoltaic materials and the experimental methods may be applicable to understanding dendrite growth in lithium ion batteries.
| S-EPMC6060128 | biostudies-literature
Project description:Structural color printings have broad applications due to their advantages of long-term sustainability, eco-friendly manufacturing, and ultra-high resolution. However, most of them require costly and time-consuming fabrication processes from nanolithography to vacuum deposition and etching. Here, we demonstrate a new color printing technology based on polymer-assisted photochemical metal deposition (PPD), a room temperature, ambient, and additive manufacturing process without requiring heating, vacuum deposition or etching. The PPD-printed silver films comprise densely aggregated silver nanoparticles filled with a small amount (estimated <20% volume) of polymers, producing a smooth surface (roughness 2.5 nm) even better than vacuum-deposited silver films (roughness 2.8 nm) at ~4 nm thickness. Further, the printed composite films have a much larger effective refractive index n (~1.90) and a smaller extinction coefficient k (~0.92) than PVD ones in the visible wavelength range (400 to 800 nm), therefore modulating the surface reflection and the phase accumulation. The capability of PPD in printing both ultra-thin (~5 nm) composite films and highly reflective thicker film greatly benefit the design and construction of multilayered Fabry-Perot (FP) cavity structures to exhibit vivid and saturated colors. We demonstrated programmed printing of complex pictures of different color schemes at a high spatial resolution of ~6.5 μm by three-dimensionally modulating the top composite film geometries and dielectric spacer thicknesses (75 to 200 nm). Finally, PPD-based color picture printing is demonstrated on a wide range of substrates, including glass, PDMS, and plastic, proving its broad potential in future applications from security labeling to color displays.
| S-EPMC8986859 | biostudies-literature
Project description:Despite nearly two decades of research, the absence of ideal flexible and transparent electrodes has been the largest obstacle in realizing flexible and printable electronics for future technologies. Here we report the fabrication of 'polymer-metal hybrid electrodes' with high-performance properties, including a bending radius <1 mm, a visible-range transmittance>95% and a sheet resistance <10 Ω sq(-1). These features arise from a surface modification of the plastic substrates using an amine-containing nonconjugated polyelectrolyte, which provides ideal metal-nucleation sites with a surface-density on the atomic scale, in combination with the successive deposition of a facile anti-reflective coating using a conducting polymer. The hybrid electrodes are fully functional as universal electrodes for high-end flexible electronic applications, such as polymer solar cells that exhibit a high power conversion efficiency of 10% and polymer light-emitting diodes that can outperform those based on transparent conducting oxides.
| S-EPMC4382999 | biostudies-literature
Project description:This work establishes carbon nanofibre-mediated patterning of metal oxide nanostructures, through the combination of electrospinning and vapor-phase transport growth. Electrospinning of a suitable precursor with subsequent carbonization results in the patterning of catalyst gold nanoparticles embedded within carbon nanofibres. During vapor-phase transport growth, these nanofibres allow preferential growth of one-dimensional metal oxide nanostructures, which grow radially outward from the nanofibril axis, yielding a hairy caterpillar-like morphology. The synthesis of metal oxide caterpillars is demonstrated using zinc oxide, indium oxide, and tin oxide. Source and substrate temperatures play the most crucial role in determining the morphology of the metal oxide caterpillars, whereas the distribution of the nanofibres also has a significant impact on the overall morphology. Introducing the current methodology with near-field electrospinning further facilitates user-defined custom patterning of metal oxide caterpillar-like structures.
| S-EPMC9240016 | biostudies-literature
Project description:A technique is presented for collecting data on both the spatial and temporal variations in the electrical properties of a film as it is deposited on a flexible substrate. A flexible printed circuit board substrate with parallel electrodes distributed across its surface was designed. Zinc oxide films were then deposited on the flexible substrate at different temperatures via atmospheric pressure chemical vapour deposition (AP-CVD) using a spatial atomic layer deposition system. AP-CVD is a promising high-throughput thin film deposition technique with applications in flexible electronics. Collecting data on the film properties in-situ allows us to directly observe how deposition conditions affect the evolution of those properties in real-time. The spatial uniformity of the growing film was monitored, and the various stages of film nucleation and growth on the polymer substrate were observed. The measured resistance of the films was observed to be very high until a critical amount of material has been deposited, consistent with Volmer-Weber growth. Furthermore, monitoring the film resistance during post-deposition cooling enabled immediate identification of metallic or semiconducting behaviour within the conductive ZnO films. This technique allows for a more complete understanding of metal chalcogen film growth and properties, and the high volume of data generated will be useful for future implementations of machine-learning directed materials science.
| S-EPMC7672091 | biostudies-literature
Project description:Flexible electronics has received widespread concern and research. As a most-fundamental step and component, polymer metallization to introduce conductive electrode is crucial in successful establishment and application of flexible and stretchable electronic system. Ionic polymer-metal composite (IPMC) is such an attractive flexible mechanical sensor with significant advantages of passive and space-discriminative capability. Generally, the IPMC sensor is fabricated by the electroless plating method to form structure of ionic polymer membrane sandwiched with two metallic electrodes. In order to obtain high-quality interface adhesion and conductivity between polymer and metal, the plating process for IPMC sensor is usually time-consuming and uncontrollable and has low reproducibility, which make it difficult to use in practice and in large-scale. Here, a manufacturable method and equipment with short processing time and high reproducibility for fabricating IPMC sensors by in situ plasma etching and magnetron sputtering depositing on flexible substrates is developed. First, the new method shortens the fabrication period greatly from 2 weeks to 2 h to obtain IPMC sensors with sizes up to 9 cm × 9 cm or arrays in various patterns. Second, the integrated operation ensures all sample batch stability and performance repeatability. In a typical IPMC sensor, nearly 200 mV potential signal due to ion redistribution induced by bending strain under 1.6% can be produced without any external power supply, which is much higher than the traditional electroless plating sensor. This work verified that the in situ plasma etching and magnetron sputtering deposition could significantly increase the interface and surface conductivity of the flexible devices, resulting in the present high sensitivity as well as linear correlation with strain of the IPMC sensor. Therefore, this introduced method is scalable and believed to be used to metalize flexible substrates with different metals, providing a new route to large-scale fabrication of flexible devices for potential wearable applications in real-time monitoring human motion and human-machine interaction.
| S-EPMC6644406 | biostudies-literature
Project description:In the race to find novel transparent conductors for next-generation optoelectronic devices, graphene is supposed to be one of the leading candidates, as it has the potential to satisfy all future requirements. However, the use of graphene as a truly transparent conductor remains a great challenge because its lowest sheet resistance demonstrated so far exceeds that of the commercially available indium tin oxide. The possible cause of low conductivity lies in its intrinsic growth process, which requires further exploration. In this work, I have approached this problem by controlling graphene nucleation during the chemical vapor deposition process as well as by adopting three distinct procedures, including bis(trifluoromethanesulfonyl)amide doping, post annealing, and flattening of graphene films. Additionally, van der Waals stacked graphene layers have been prepared to reduce the sheet resistance effectively. I have demonstrated an efficient and flexible transparent conductor with the extremely low sheet resistance of 40 Ω sq-1, high transparency (T r ∼90%), and high mechanical flexibility, making it suitable for electrode materials in future optoelectronic devices.
| S-EPMC9419159 | biostudies-literature