Spray-Drying to Get Spin-Crossover Materials.
Ontology highlight
ABSTRACT:
SUBMITTER: Daro N
PROVIDER: S-EPMC5344545 | biostudies-other | 2017 Jan
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Microwave electromagnetic radiation that ranges from one meter to one millimetre wavelengths is finding numerous applications for wireless communication, navigation and detection, which makes materials able to tune microwave radiation getting widespread interest. Here we offer a new way to tune GHz frequency radiation by using spin-crossover complexes that are known to change their various physical properties under the influence of diverse external stimuli. As a result of electronic re-configuration process, microwave absorption properties differ for high spin and low spin forms of the complex. The evolution of a microwave absorption spectrum for the switchable compound within the region of thermal transition indicates that the high-spin and the low-spin forms are characterized by a different attenuation of electromagnetic waves. Absorption and reflection coefficients were found to be higher in the high-spin state comparing to the low-spin state. These results reveal a considerable potential for the implementation of spin-crossover materials into different elements of microwave signal switching and wireless communication.
| S-EPMC5133552 | biostudies-literature
Project description:This review covers recent developments in the area of particle engineering via spray drying. The last decade has seen a shift from empirical formulation efforts to an engineering approach based on a better understanding of particle formation in the spray drying process. Microparticles with nanoscale substructures can now be designed and their functionality has contributed significantly to stability and efficacy of the particulate dosage form. The review provides concepts and a theoretical framework for particle design calculations. It reviews experimental research into parameters that influence particle formation. A classification based on dimensionless numbers is presented that can be used to estimate how excipient properties in combination with process parameters influence the morphology of the engineered particles. A wide range of pharmaceutical application examples -- low density particles, composite particles, microencapsulation, and glass stabilization -- is discussed, with specific emphasis on the underlying particle formation mechanisms and design concepts.
| S-EPMC2292490 | biostudies-other
Project description:Full dataset used to evaluate the spray-drying process parameters on the preparation of a micronized powder made of maltodextrin (MDX) is herein reported. The process parameters (namely, feed flow rate (FFR); inlet temperature (Tin); nozzle pressure (PN); noozle diameter (DN) and difference of pressure between cyclone and chamber (ΔP)) were screened through a Central Composite Design (25-1; 2∗5; nC=2) using the following responses: product yield, powder size and size dispersity (span) and the outlet temperature of the exhausted air (Tout). Data indicate that, in the considered range, only the product yield and the powder median diameter were influenced by the process. The product yield progressively increased on increasing inlet temperature and decreasing the amount or the size of droplets to be dried. The powder median diameter was positively influenced only by the nozzle diameter. This data presented in this article completes a wider work related on "Maltodextrins as drying auxiliary agent for the preparation of easily resuspendable nanoparticles" (Magri et al., 2019).
| S-EPMC6660546 | biostudies-literature
Project description:Molecule-based spin state switching materials that display ambient temperature transitions with accompanying wide thermal hysteresis offer an opportunity for electronic switching, data storage, and optical technologies but are rare in existence. Here, we present the first 2D Hofmann-type materials to exhibit the elusive combination of ambient temperature spin crossover with wide thermal hysteresis (ΔT = 50 and 65 K). Combined structural, magnetic, spectroscopic, and theoretical analyses show that the highly cooperative transition behaviours of these layered materials arise due to strong host-host interactions in their interdigitated lattices, which optimises long-range communication pathways. With the presence of water molecules in the interlayer pore space in the hydrated phases, competing host-host and host-guest interactions occur, whilst water removal dramatically increases the framework cooperativity, thus affording systematic insight into the structural features that favour optimal spin crossover properties.
| S-EPMC6048833 | biostudies-literature
Project description:A method of microalgae-templated spray drying to develop hierarchical porous Fe3O4/C composite microspheres as anode materials for Li-ion batteries was developed. During the spray-drying process, individual microalgae serve as building blocks of raspberry-like hollow microspheres via self-assembly. In the present study, microalgae-derived carbon matrices, naturally doped heteroatoms, and hierarchical porous structural features synergistically contributed to the high electrochemical performance of the Fe3O4/C composite microspheres, enabling a discharge capacity of 1375 mA·h·g-1 after 700 cycles at a current density of 1 A/g. Notably, the microalgal frameworks of the Fe3O4/C composite microspheres were maintained over the course of charge/discharge cycling, thus demonstrating the structural stability of the composite microspheres against pulverization. In contrast, the sample fabricated without microalgal templating showed significant capacity drops (up to ~40% of initial capacity) during the early cycles. Clearly, templating of microalgae endows anode materials with superior cycling stability.
| S-EPMC7589054 | biostudies-literature
Project description:PurposeThe purpose of this work is to introduce solvent-assisted secondary drying, a method used to accelerate the residual solvent removal from spray dried materials. Spray-drying is used to manufacture amorphous solid dispersions, which enhance the bioavailability of active pharmaceutical ingredients (APIs) with low aqueous solubility. In the spray-drying process, API and excipients are co-dissolved in a volatile organic solvent, atomized into droplets through a nozzle, and introduced to a drying chamber containing heated nitrogen gas. The product dries rapidly to form a powder, but small amounts of residual solvent (typically, 1 to 10 wt%) remain in the product and must be removed in a secondary-drying process. For some spray-dried materials, secondary drying by traditional techniques can take days and requires balancing stability risks with process time.MethodsSpray-dried polymers were secondary dried, comparing the results for three state-of-the-art methods that employed a jacketed, agitated-vessel dryer: (1) vacuum-only drying, (2) water-assisted drying, or (3) methanol-assisted drying. Samples of material were pulled at various time points and analyzed by gas chromatography (GC) and Karl Fischer (KF) titration to track the drying process.ResultsModel systems were chosen for which secondary drying is slow. For all cases studied, methanol-assisted drying outperformed the vacuum-only and water-assisted drying methods.ConclusionsThe observation that methanol-assisted drying is more effective than the other drying techniques is consistent with the free-volume theory of solvent diffusion in polymers.
| S-EPMC7395053 | biostudies-literature
Project description:Lentil protein isolate (LPI)-κ-carrageenan (κ-C) and -ι-carrageenan (ι-C) based microcapsules were prepared through spray-drying and freeze-drying to encapsulate flaxseed oil in order to reach final oil levels of 20% and 30%. Characteristics of the corresponding emulsions and their dried microcapsules were determined. For emulsion properties, all LPI-κ-C and LPI-ι-C emulsions remained 100% stable after 48 h, while the LPI emulsions destabilized quickly (p < 0.05) after homogenization mainly due to low emulsion viscosity. For spray-dried microcapsules, the highest yield was attributed to LPI-ι-C with 20% oil, followed by LPI-κ-C 20% and LPI-ι-C 30% (p < 0.05). Flaxseed oil was oxidized more significantly among the spray-dried capsules compared to untreated oil (p < 0.05) due to the effect of heat. Flaxseed oil was more stable in all the freeze-dried capsules and showed significantly lower oil oxidation than the untreated oil after 8 weeks of storage (p < 0.05). As for in vitro oil release profile, a higher amount of oil was released for LPI-κ-C powders under simulated gastric fluid (SGF), while more oil was released for LPI-ι-C powders under simulated gastric fluid and simulated intestinal fluid (SGF + SIF) regardless of drying method and oil content. This study enhanced the emulsion stability by applying carrageenan to LPI and showed the potential to make plant-based microcapsules to deliver omega-3 oils.
| S-EPMC9145131 | biostudies-literature
Project description:Spray drying is a particle engineering technique used to manufacture respirable pharmaceutical powders that are suitable for delivery to the deep lung. It is amenable to processing both small molecules and biologic actives, including proteins. In this work, a simultaneous spray-drying process, termed simul-spray, is described; the process involves two different active pharmaceutical ingredient (API) solutions that are simultaneously atomized through separate nozzles into a single-spray dryer. Collected by a single cyclone, simul-spray produces a uniform mixture of two different active particles in a single-unit operation. While combination therapies for dry powder inhalers containing milled small molecule API are commercially approved, limited options exist for preparing combination treatments that contain both small molecule APIs and biotherapeutic molecules. Simul-spray drying is also ideal for actives which cannot withstand a milling-based particle engineering process, or which require a high dose that is incompatible with a carrier-based formulation. Three combination case studies are demonstrated here, in which bevacizumab is paired with erlotinib, cisplatin, or paclitaxel in a dry powder inhaler formulation. These model systems were chosen for their potential relevance to the local treatment of lung cancer. The resulting formulations preserved the biologic activity of the antibody, achieved target drug concentration, and had aerosol properties suitable for pulmonary delivery.
| S-EPMC9227944 | biostudies-literature
Project description:The present study explored vacuum drum drying (VDD) as an alternative technology for amorphous solid dispersions (ASDs) manufacture compared to hot-melt extrusion (HME) and spray drying (SD) focusing on downstream processability (powder properties, compression behavior and tablet performance). Ritonavir (15% w/w) in a copovidone/sorbitan monolaurate matrix was used as ASD model system. The pure ASDs and respective tablet blends (TB) (addition of filler, glidant, lubricant) were investigated. Milled extrudate showed superior powder properties (e.g., flowability, bulk density) compared to VDD and SD, which could be compensated by the addition of 12.9% outer phase. Advantageously, the VDD intermediate was directly compressible, whereas the SD material was not, resulting in tablets with defects based on a high degree of elastic recovery. Compared to HME, the VDD material showed superior tabletability when formulated as TB, resulting in stronger compacts at even lower solid fraction values. Despite the differences in tablet processing, tablets showed similar tablet performance in terms of disintegration and dissolution independent of the ASD origin. In conclusion, VDD is a valid alternative to manufacture ASDs. VDD offered advantageous downstream processability compared to SD: less solvents and process steps required (no second drying), improved powder properties and suitable for direct compression.
| S-EPMC8632852 | biostudies-literature
Project description:Microcapsules of ciriguela peel extracts obtained by ultrasound-assisted extraction were prepared by spray drying, whose results were compared with those of freeze-drying as a control. The effects of spray-drying air temperature, feed flow rate and ratio of encapsulating agents (maltodextrin and arabic gum) were studied. Encapsulation efficiency, moisture content, total phenolic compounds (TPC), water activity, hygroscopicity, solubility, colorimetric parameters, phenolic profile by HPLC/DAD, simulated gastrointestinal digestion and morphology of spray-dried and freeze-dried microcapsules were evaluated, as well as their stability of TPC during 90 days storage at 7 and 25 °C. Spray-dried extract showed higher encapsulation efficiency (98.83%) and TPC (476.82 mg GAE g-1) than freeze-dried extract. The most abundant compounds in the liquid extract of ciriguela peel flour were rutin, epicatechin gallate, chlorogenic acid and quercetin. Rutin and myricetin were the major flavonoids in the spray-dried extract, while quercetin and kaempferol were in the freeze-dried one. The simulated gastrointestinal digestion test of microencapsulated extracts revealed the highest TPC contents after the gastric phase and the lowest one after the intestinal one. Rutin was the most abundant compound after the digestion of both spray-dried (68.74 µg g-1) and freeze-dried (93.98 µg g-1) extracts. Spray-dried microcapsules were of spherical shape, freeze-dried products of irregular structures. Spray-dried microcapsules had higher phenolic compounds contents after 90 days of storage at 7 °C compared to those stored at 25 °C, while the lyophilized ones showed no significant difference between the two storage temperatures. The ciriguela agro-industrial residue can be considered an interesting alternative source of phenolic compounds that could be used, in the form of bioactive compounds-rich powders, as an ingredient in pharmaceutical, cosmetic and food industries.
| S-EPMC10502068 | biostudies-literature