Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Comparative Analysis of the Composition and Active Property Evaluation of Certain Essential Oils to Assess their Potential Applications in Active Food Packaging.

ABSTRACT: The antifungal, antibacterial, and antioxidant activity of four commercial essential oils (EOs) (thyme, clove, rosemary, and tea tree) from Romanian production were studied in order to assess them as bioactive compounds for active food packaging applications. The chemical composition of the oils was determined with the Folin-Ciocâlteu method and gas chromatography coupled with mass spectrometry and flame ionization detectors, and it was found that they respect the AFNOR/ISO standard limits. The EOs were tested against three food spoilage fungi-Fusarium graminearum, Penicillium corylophilum, and Aspergillus brasiliensis-and three potential pathogenic food bacteria-Staphylococcus aureus, Escherichia coli, and Listeria monocytogenes-using the disc diffusion method. It was found that the EOs of thyme, clove, and tea tree can be used as antimicrobial agents against the tested fungi and bacteria, thyme having the highest inhibitory effect. Concerning antioxidant activity determined by 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azino-bis 3-ethylbenzthiazoline-6-sulfonic acid (ABTS) methods, it has been established that the clove oil exhibits the highest activity because of its high phenolic content. Promising results were obtained by their incorporation into chitosan emulsions and films, which show potential for food packaging. Therefore, these essential oils could be suitable alternatives to chemical additives, satisfying the consumer demand for naturally preserved food products ensuring its safety.

SUBMITTER: Vasile C

PROVIDER: S-EPMC5344628 | biostudies-other | 2017 Jan

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Synergistic Antioxidant and Antibacterial Advantages of Essential Oils for Food Packaging Applications.

Project description:The development of food-borne and infectious diseases has increased globally at an anomalous rate and is combined with emerging social and economic problems. This highlights the need for new and improved antibacterial agents with novel and different mechanisms of action at regular intervals. Some chemical or artificial food additives are considered harmful if they are used beyond their permissible levels. Today, consumers are demanding alternative, green, safer, and natural food additives to increase the shelf life of food. Essential oils (EOs) are concentrated liquid mixtures of volatile compounds with antioxidant and antibacterial properties that can be used as natural, eco-friendly, renewable, and cost-effective additives. The use of combinations of different EOs and their components is a promising strategy to increase the synergistic and additive effects of EOs in foods. In this article, we review the recent literature on EOs concerning the chemical constituents, extraction methods, antioxidant and antibacterial activities, and their mechanisms of action. Additionally, we discuss the synergistic interaction of different EOs and their components, challenges, and future directions of EOs as natural food preservatives, with special emphasis on shelf life extension and applications in the packaging of food products.

| S-EPMC8466708 | biostudies-literature

Antibacterial and Biodegradable Polysaccharide-Based Films for Food Packaging Applications: Comparative Study.

Project description:One of the major objectives of food industry is to develop low-cost biodegradable food packaging films with optimal physicochemical properties, allowing for their large-scale production and providing a variety of applications. To meet the expectations of food industry, we have fabricated a series of solution-cast films based on common biodegradable polysaccharides (starch, chitosan and alginate) to be used in food packaging applications. Selected biopolymers were modified by the addition of glycerol and oxidized sucrose (starch), glycerol (chitosan), and glycerol and calcium chloride (alginate), as well as being used to form blends (starch/chitosan and starch/alginate, respectively). A chestnut extract was used to provide antibacterial properties to the preformed materials. The results of our studies showed that each modification reduced the hydrophilic nature of the polymers, making them more suitable for food packaging applications. In addition, all films exhibited much higher barrier properties to oxygen and carbon dioxide than commercially available films, such as polylactic acid, as well as exhibiting antimicrobial properties against model Gram-negative and Gram-positive bacteria (Escherichia coli and Staphylococcus epidermidis, respectively), as well as yeast (Candida albicans).

| S-EPMC9103775 | biostudies-literature

Biopolymers-Based Materials Containing Silver Nanoparticles as Active Packaging for Food Applications-A Review.

Project description:Packaging is an integral part of food products, allowing the preservation of their quality. It plays an important role, protecting the packed product from external conditions, maintaining food quality, and improving properties of the packaged food during storage. Nevertheless, commonly used packaging based on synthetic non-biodegradable polymers causes serious environmental pollution. Consequently, numerous recent studies have focused on the development of biodegradable packaging materials based on biopolymers. In addition, biopolymers may be classified as active packaging materials, since they have the ability to carry different active substances. This review presents the latest updates on the use of silver nanoparticles in packaging materials based on biopolymers. Silver nanoparticles have become an interesting component of biodegradable biopolymers, mainly due to their antimicrobial properties that allow the development of active food packaging materials to prolong the shelf life of food products. Furthermore, incorporation of silver nanoparticles into biopolymers may lead to the development of materials with improved physical-mechanical properties.

| S-EPMC7037217 | biostudies-literature

Silk Fibroin and Pomegranate By-Products to Develop Sustainable Active Pad for Food Packaging Applications.

Project description:In this study, a bio-based polymeric system loaded with fruit by-products was developed. It was based on silk fibroin produced by the silkworm Bombyx mori and pomegranate peel powder, selected as active agent. The weight ratio between fibroin and pomegranate powder was 30:70. Pads also contained 20% w/w of glycerol vs. fibroin to induce water insolubility. Control systems, consisting of only fibroin and glycerol, were produced as reference. Both control and active systems were characterized for structural and morphological characterization (Fourier-transform infrared spectroscopy and optical microscope), antioxidant properties and antimicrobial activity against two foodborne spoilage microorganisms. Results demonstrate that under investigated conditions, an active system was obtained. The pad showed a good water stability, with weight loss of about 28% due to the release of the active agent and not to the fibroin loss. In addition, this edible system has interesting antioxidant and antimicrobial properties. In particular, the pad based on fibroin with pomegranate peel recorded an antioxidant activity of the same order of magnitude of that of vitamin C, which is one of the most well-known antioxidant compounds. As regards the antimicrobial properties, results underlined that pomegranate peel in the pad allowed maintaining microbial concentration around the same initial level (104 CFU/mL) for more than 70 h of monitoring, compared to the control system where viable cell concentration increased very rapidly up to 108 CFU/mL.

| S-EPMC8700627 | biostudies-literature

Properties of Active Levan-Bitter Vetch Protein Films for Potential Use in Food Packaging Applications.

Project description:ζ-potential and Z-average were determined on film-forming solutions of bitter vetch-levan-based films prepared at different ratios in the absence and presence of glycerol as a plasticizer. The casting method was used to obtain manageable films. The results revealed that levan increases the elongation at break of bitter vetch protein films and reduces the tensile strength. The optimal result was obtained through the film that was prepared with the ratio of 50% bitter vetch proteins and 50% levan, in terms of mechanical properties. The surfaces of the prepared films appeared to be more compact and smooth. On increasing the glycerol concentration in the bitter vetch protein-levan films, the oxygen and water vapor permeability increased compared to the control (P < 0.05). Based on the overall results, the reinforcement of bitter vetch proteins with levan at a ratio of 1:1 represents optimal film properties in the presence of a low concentration of glycerol. The proposed film is suggested as an innovative packaging system for beef meat to preserve its quality over time.

| S-EPMC10652369 | biostudies-literature

Controlled Release of Volatile Antimicrobial Compounds from Mesoporous Silica Nanocarriers for Active Food Packaging Applications.

Project description:Essential oils and their active components have been extensively reported in the literature for their efficient antimicrobial, antioxidant and antifungal properties. However, the sensitivity of these volatile compounds towards heat, oxygen and light limits their usage in real food packaging applications. The encapsulation of these compounds into inorganic nanocarriers, such as nanoclays, has been shown to prolong the release and protect the compounds from harsh processing conditions. Nevertheless, these systems have limited shelf stability, and the release is of limited control. Thus, this study presents a mesoporous silica nanocarrier with a high surface area and well-ordered protective pore structure for loading large amounts of natural active compounds (up to 500 mg/g). The presented loaded nanocarriers are shelf-stable with a very slow initial release which levels out at 50% retention of the encapsulated compounds after 2 months. By the addition of simulated drip-loss from chicken, the release of the compounds is activated and gives an antimicrobial effect, which is demonstrated on the foodborne spoilage bacteria Brochothrixthermosphacta and the potentially pathogenic bacteria Escherichia coli. When the release of the active compounds is activated, a ≥4-log reduction in the growth of B. thermosphacta and a 2-log reduction of E. coli is obtained, after only one hour of incubation. During the same one-hour incubation period the dry nanocarriers gave a negligible inhibitory effect. By using the proposed nanocarrier system, which is activated by the food product itself, increased availability of the natural antimicrobial compounds is expected, with a subsequent controlled antimicrobial effect.

| S-EPMC9266657 | biostudies-literature

Hot-Melt-Extruded Active Films Prepared from EVOH/Trans-Cinnamaldehyde Blends Intended for Food Packaging Applications.

Project description:In this work, novel active films based on ethylene vinyl alcohol copolymer (EVOH) and cinnamaldehyde (CIN) were successfully obtained employing a hybrid technique consisting of a two-step protocol involving the preparation of a polymeric EVOH-CIN masterbatch by solvent-casting for its further utilization in the preparation of bioactive EVOH-based films by melt extrusion processing. The influence of CIN over the EVOH matrix was studied in terms of optical, morphological, thermal, and mechanical properties. Optically transparent films were obtained and the incorporation of cinnamaldehyde resulted in yellow-colored films, producing a blocking effect in the UV region. A decrease in the glass transition temperature was observed in the formulations containing cinnamaldehyde, indicating a plasticizing effect. This phenomenon was confirmed by an increase in the elongation at break values of the extruded films. Results from thermogravimetric analysis determined a slight decrease in the thermal stability of EVOH provoked by the vaporization of the bioactive compound. Bioactive properties of the films were also studied; the presence of residual cinnamaldehyde in EVOH after being subjected to an extrusion process conferred some radical scavenging activity determined by the DPPH assay whereas films were able to exert antifungal activity in vapor phase against Penicillium expansum. Therefore, the present work shows the potential of the hybrid technique employed in this study for the preparation of bioactive films by a ready industrial process technology for food packaging applications.

| S-EPMC8304191 | biostudies-literature

Antimicrobial Polymer-Based Materials for Food Packaging Applications.

Project description:Antimicrobial packaging has recently attracted a great deal of interest from the food industry due to the boost in consumer demand for minimally-processed, preservative-free products.[...].

| S-EPMC7240702 | biostudies-literature

Injection Molded PP Foams Using Food Ingredients for Food Packaging Applications.

Project description:A new approach to the creation of polypropylene (PP) based foaming materials was developed using food grade foaming agents that were coated on the PP pellets. More specifically, sodium bicarbonate and organic acids were used to coat PP pellets using either polyethyleneoxide (PEO) or lipid esters as coating stabilizers. In order to overcome the problem of the thermal decomposition of sodium bicarbonate at temperatures lower than the PP melting temperature, which makes the direct foaming during melt mixing impossible, the proposed methodology was proved quite efficient. Thus, new PP masterbatches were prepared, where the foaming agents were incorporated as coating at PP pellets at contents up to 10%, and initially used in Lab scale injection machines in order to find the best combination of materials that resulted in the production of foamed articles. Subsequently selected material combinations were tested in an industrial scale injection molding machine, where an optimization of the injection parameters was attempted. The outcome of this was the production of PP articles with significantly increased void fraction, up to 14%, decreased thermal conductivity, up to 20%, and various pore sizes as was observed via microscopic examination using SEM and CLSM.

| S-EPMC7830478 | biostudies-literature

Basil Essential Oil: Composition, Antimicrobial Properties, and Microencapsulation to Produce Active Chitosan Films for Food Packaging.

Project description:The essential oil (EO) from basil-Ocimum basilicum-was characterized, microencapsulated by vibration technology, and used to prepare a new type of packaging system designed to extend the food shelf life. The basil essential oil (BEO) chemical composition and antimicrobial activity were analyzed, as well as the morphological and biological properties of the derived BEO microcapsules (BEOMC). Analysis of BEO by gas chromatography demonstrated that the main component was linalool, whereas the study of its antimicrobial activity showed a significant inhibitory effect against all the microorganisms tested, mostly Gram-positive bacteria. Moreover, the prepared BEOMC showed a spheroidal shape and retained the EO antimicrobial activity. Finally, chitosan-based edible films were produced, grafted with BEOMC, and characterized for their physicochemical and biological properties. Since their effective antimicrobial activity was demonstrated, these films were tested as packaging system by wrapping cooked ham samples during 10 days of storage, with the aim of their possible use to extend the shelf life of the product. It was demonstrated that the obtained active film can both control the bacterial growth of the cooked ham and markedly inhibit the pH increase of the packaged food.

| S-EPMC7827191 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data