Mesenchymal Stem Cells in Combination with Scaffolds for Bone Tissue Engineering.
Ontology highlight
ABSTRACT:
SUBMITTER: Nassif L
PROVIDER: S-EPMC5448870 | biostudies-other | 2011 Oct
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Patients suffering from bone defects are often treated with autologous bone transplants, but this therapy can cause many complications. New approaches are therefore needed to improve treatment for bone defects, and stem cell therapy presents an exciting alternative approach. Although extensive evidence from basic studies using stem cells has been reported, few clinical applications using stem cells for bone tissue engineering have been developed. We investigated whether injectable tissue-engineered bone (TEB) composed of mesenchymal stem cells (MSCs) and platelet-rich plasma was able to regenerate functional bone in alveolar deficiencies. We performed these studies in animals and subsequently carried out large-scale clinical studies in patients with long-term follow-up; these showed good bone formation using minimally invasive MSC transplantation. All patients exhibited significantly improved bone volume with no side effects. Newly formed bone areas at 3 months were significantly increased over the preoperation baseline (p < .001) and reached levels equivalent to that of native bone. No significant bone resorption occurred during long-term follow-up. Injectable TEB restored masticatory function in patients. This novel clinical approach represents an effective therapeutic utilization of bone tissue engineering.
| S-EPMC4043220 | biostudies-literature
Project description:Treatment of critical-sized bone defects with cells and biomaterials offers an efficient alternative to traditional bone grafts. Chitosan (CS) is a natural biopolymer that acts as a scaffold in bone tissue engineering (BTE). Polyphosphate (PolyP), recently identified as an inorganic polymer, acts as a potential bone morphogenetic material, whereas pigeonite (Pg) is a novel iron-containing ceramic. In this study, we prepared and characterized scaffolds containing CS, calcium polyphosphate (CaPP) and Pg particles for bone formation in vitro and in vivo. Chitosan/CaPP scaffolds and CS/CaPP scaffolds containing varied concentrations of Pg particles (0.25%, 0.5%, 0.75% and 1%) were prepared and characterized by SEM, XRD, EDAX, FT-IR, degradation, protein adsorption, mechanical strength and biomineralization studies. The cytocompatibility of these scaffolds with mouse mesenchymal stem cells (mMSCs, C3H10T1/2) was determined by MTT assay and fluorescence staining. Cell proliferation on scaffolds was assessed using MUSE™ (Merck-Millipore, Germany) cell analyser. The effect of scaffolds on osteoblast differentiation at the cellular level was evaluated by Alizarin red (AR) and alkaline phosphatase (ALP) staining. At the molecular level, the expression of osteoblast differentiation marker genes such as Runt-related transcription factor-2 (Runx2), ALP, type I collagen-1 (Col-I) and osteocalcin (OC) was determined by real-time reverse transcriptase (RT-PCR) analysis. Bone regeneration was assessed by X-ray radiographs, SEM and EDAX analyses, and histological staining such as haematoxylin and eosin staining and Masson's trichrome staining (MTS) in a rat critical-sized tibial defect model system. The inclusion of iron-containing Pg particles at 0.25% concentration in CS/CaPP scaffolds showed enhanced bioactivity by protein adsorption and biomineralization, compared with that shown by CS/CaPP scaffolds alone. Increased proliferation of mMSCs was observed with CS/CaPP/Pg scaffolds compared with control and CS/CaPP scaffolds. Increase in cell proliferation was accompanied by G0/G1 to G2/M phase transition with increased levels of cyclin(s) A, B and C. Pg particles in CS/CaPP scaffolds enhanced osteoblast differentiation at the cellular and molecular levels, as evidenced by increased calcium deposits, ALP activity and expression of osteoblast marker genes. In vivo implantation of scaffolds in rat critical-sized tibial defects displayed accelerated bone formation after 8 weeks. The current findings indicate that CS/CaPP scaffolds containing iron-containing Pg particles serve as an appropriate template to support proliferation and differentiation of MSCs to osteoblasts in vitro and bone formation in vivo and thus support their candidature for BTE applications.
| S-EPMC6528860 | biostudies-literature
Project description:Segmental bone defects that are caused by trauma, infection, tumor resection, or osteoporotic fractures present significant surgical treatment challenges. Host bone autograft is considered the gold standard for restoring function but comes with the cost of harvest site comorbidity. Allograft bone is a secondary option but has its own limitations in the incorporation with the host bone as well as its cost. Therefore, developing new bone tissue engineering strategies to treat bone defects is critically needed. In the past three decades, the use of stem cells that are delivered with different scaffolds or growth factors for bone tissue engineering has made tremendous progress. Many varieties of stem cells have been isolated from different tissues for use in bone tissue engineering. This review summarizes the progress in using different postnatal stem cells, including bone marrow mesenchymal stem cells, muscle-derived stem cells, adipose-derived stem cells, dental pulp stem cells/periodontal ligament stem cells, periosteum stem cells, umbilical cord-derived stem cells, peripheral blood stem cells, urine-derived stem cells, stem cells from apical papilla, and induced pluripotent stem cells, for bone tissue engineering and repair. This review also summarizes the progress using exosomes or extracellular vesicles that are delivered with various scaffolds for bone repair. The advantages and disadvantages of each type of stem cell are also discussed and explained in detail. It is hoped that in the future, these preclinical results will translate into new regenerative therapies for bone defect repair.
| S-EPMC10971350 | biostudies-literature
Project description:Large bone defects are a major health concern worldwide. The conventional bone repair techniques (e.g., bone-grafting and Masquelet techniques) have numerous drawbacks, which negatively impact their therapeutic outcomes. Therefore, there is a demand to develop an alternative bone repair approach that can address the existing drawbacks. Bone tissue engineering involving the utilization of human mesenchymal stem cells (hMSCs) has recently emerged as a key strategy for the regeneration of damaged bone tissues. However, the use of tissue-engineered bone graft for the clinical treatment of bone defects remains challenging. While the role of mechanical loading in creating a bone graft has been well explored, the effects of mechanical loading factors (e.g., loading types and regime) on clinical outcomes are poorly understood. This review summarizes the effects of mechanical loading on hMSCs for bone tissue engineering applications. First, we discuss the key assays for assessing the quality of tissue-engineered bone grafts, including specific staining, as well as gene and protein expression of osteogenic markers. Recent studies of the impact of mechanical loading on hMSCs, including compression, perfusion, vibration and stretching, along with the potential mechanotransduction signalling pathways, are subsequently reviewed. Lastly, we discuss the challenges and prospects of bone tissue engineering applications.
| S-EPMC7461207 | biostudies-literature
Project description:Mesenchymal stem cells (MSC) are of major interest in regenerative medicine, as they are easily harvested from a variety of sources (including bone marrow and fat aspirates) and they are able to form a range of mesenchymal tissues, in vitro and in vivo. We focus here on the use of MSCs for engineering of cartilage, bone, and complex osteochondral tissue constructs, using protocols that replicate some aspects of natural mesodermal development. For engineering of human bone, we discuss some of the current advances, and highlight the use of perfusion bioreactors for supporting anatomically exact human bone grafts. For engineering of human cartilage, we discuss the limitations of current approaches, and highlight engineering of stratified, mechanically functional human cartilage interfaced with bone by mesenchymal condensation of MSCs. Taken together, current advances enable engineering of physiologically relevant bone, cartilage and osteochondral composites, and physiologically relevant studies of osteochondral development and disease.
| S-EPMC5560093 | biostudies-other
Project description:Craniosynostosis is a debilitating birth defect characterized by the premature fusion of cranial bones resulting from premature loss of stem cells located in suture tissue between growing bones. Mesenchymal stromal cells in long bone and the cranial suture are known to be multipotent cell sources in the appendicular skeleton and cranium, respectively. We are developing biomaterial constructs to maintain stemness of the cranial suture cell population towards an ultimate goal of diminishing craniosynostosis patient morbidity. Recent evidence suggests that physical features of synthetic tissue engineering scaffolds modulate cell and tissue fate. In this study, macroporous tissue engineering scaffolds with well-controlled spherical pores were fabricated by a sugar porogen template method. Cell-scaffold constructs were implanted subcutaneously in mice for up to eight weeks then assayed for mineralization, vascularization, extracellular matrix composition, and gene expression. Pore size differentially regulates cell fate, where sufficiently large pores provide an osteogenic niche adequate for bone formation, while sufficiently small pores (<125 μm in diameter) maintain stemness and prevent differentiation. Cell-scaffold constructs cultured in vitro followed the same pore size-controlled differentiation fate. We therefore attribute the differential cell and tissue fate to scaffold pore geometry. Scaffold pore size regulates mesenchymal cell fate, providing a novel design motif to control tissue regenerative processes and develop mesenchymal stem cell niches in vivo and in vitro through biophysical features.
| S-EPMC8068670 | biostudies-literature
Project description:In extensive bone defects, tissue damage and hypoxia lead to cell death, resulting in slow and incomplete healing. Human embryonic stem cells (hESC) can give rise to all specialized lineages found in healthy bone and are therefore uniquely suited to aid regeneration of damaged bone. We show that the cultivation of hESC-derived mesenchymal progenitors on 3D osteoconductive scaffolds in bioreactors with medium perfusion leads to the formation of large and compact bone constructs. Notably, the implantation of engineered bone in immunodeficient mice for 8 wk resulted in the maintenance and maturation of bone matrix, without the formation of teratomas that is consistently observed when undifferentiated hESCs are implanted, alone or in bone scaffolds. Our study provides a proof of principle that tissue-engineering protocols can be successfully applied to hESC progenitors to grow bone grafts for use in basic and translational studies.
| S-EPMC3365157 | biostudies-literature
Project description:Unlike many other postnatal tissues, bone can regenerate and repair itself; nevertheless, this capacity can be overcome. Traditionally, surgical reconstructive strategies have implemented autologous, allogeneic, and prosthetic materials. Autologous bone--the best option--is limited in supply and also mandates an additional surgical procedure. In regenerative tissue engineering, there are myriad issues to consider in the creation of a functional, implantable replacement tissue. Importantly, there must exist an easily accessible, abundant cell source with the capacity to express the phenotype of the desired tissue, and a biocompatible scaffold to deliver the cells to the damaged region. A literature review was performed using PubMed; peer-reviewed publications were screened for relevance in order to identify key advances in stem and progenitor cell contribution to the field of bone tissue engineering. In this review, we briefly introduce various adult stem cells implemented in bone tissue engineering such as mesenchymal stem cells (including bone marrow- and adipose-derived stem cells), endothelial progenitor cells, and induced pluripotent stem cells. We then discuss numerous advances associated with their application and subsequently focus on technological advances in the field, before addressing key regenerative strategies currently used in clinical practice. Stem and progenitor cell implementation in bone tissue engineering strategies have the ability to make a major impact on regenerative medicine and reduce patient morbidity. As the field of regenerative medicine endeavors to harness the body's own cells for treatment, scientific innovation has led to great advances in stem cell-based therapies in the past decade.
| S-EPMC4654714 | biostudies-literature
Project description:Emerging evidence suggests amniotic epithelial cells (AECs) as a promising source of progenitor cells in regenerative medicine and bone tissue engineering. However, investigations comparing the regenerative properties of AECs with other sources of stem cells are particularly needed before the feasibility of AECs in bone tissue engineering can be determined. This study aimed to compare human amniotic epithelial cells (hAECs), human bone marrow mesenchymal stem cells (hBMSCs), and human amniotic fluid derived mesenchymal stem cells (hAFMSCs) in terms of their morphology, proliferation, immunophenotype profile, and osteogenic capacity in vitro and in vivo. Not only greatly distinguished by cell morphology and proliferation, hAECs, hAFMSCs, and hBMSCs exhibited remarkably different signature regarding immunophenotypical profile. Microarray analysis revealed a different expression profile of genes involved in ossification along the three cell sources, highlighting the impact of different anatomical origin and molecular response to osteogenic induction on the final tissue-forming potential. Furthermore, our data indicated a potential role of FOXC2 in early osteogenic commitment.
| S-EPMC4365333 | biostudies-literature
Project description:Current bone tissue engineering strategies aim to grow a tissue similar to native bone by combining cells and biologically active molecules with a scaffold material. In this study, a macroporous scaffold made from the seaweed-derived polymer alginate was synthesized and mineralized for cell-based bone tissue engineering applications. Nucleation of a bone-like hydroxyapatite mineral was achieved by incubating the scaffold in modified simulated body fluids (mSBF) for 4 weeks. Analysis using scanning electron microscopy and energy dispersive x-ray analysis indicated growth of a continuous layer of mineral primarily composed of calcium and phosphorous. X-ray diffraction analysis showed peaks associated with hydroxyapatite, the major inorganic constituent of human bone tissue. In addition to the mineral characterization, the ability to control nucleation on the surface, into the bulk of the material, or on the inner pore surfaces of scaffolds was demonstrated. Finally, human MSCs attached and proliferated on the mineralized scaffolds and cell attachment improved when seeding cells on mineral coated alginate scaffolds. This novel alginate- HAP composite material could be used in bone tissue engineering as a scaffold material to deliver cells, and perhaps also biologically active molecules.
| S-EPMC2928845 | biostudies-literature