Aligned Layers of Silver Nano-Fibers.
Ontology highlight
ABSTRACT:
SUBMITTER: Golovin AB
PROVIDER: S-EPMC5448912 | biostudies-other | 2012 Feb
REPOSITORIES: biostudies-other
Similar Datasets
Project description:This study reports a facile method for the fabrication of aligned Poly(3,4-ethylene dioxythiophene) (PEDOT) fibers and tubes based on electrospinning and oxidative chemical polymerization. Discrete PEDOT nano- and microfibers and nano- and microtubes are difficult to fabricate quickly and reproducibly. We employed poly(lactide-co-glycolide) (PLGA) polymers that were loaded with polymerizable 3,4-ethylene dioxythiophene (EDOT) monomer to create aligned nanofiber assemblies using a rotating glass mandrel during electrospinning. The EDOT monomer/PLGA polymer blends were then polymerized by exposure to an oxidative catalyst (FeCl3). PEDOT was polymerized by continuously dripping a FeCl3 solution onto the glass rod during electrospinning. The resulting PEDOT fibers were conductive, aligned and discrete. Fiber bundles could be easily produced in lengths of several centimeters. The PEDOT sheath/PLGA core fibers were immersed in chloroform to remove the PLGA and any residual EDOT resulting in hollow PEDOT tubes. This approach made it possible to easily generate large areas of aligned PEDOT fibers/tubes. The structure and properties of the aligned assemblies were measured using optical microscopy, electron microscopy, Raman spectroscopy, thermal gravimetric analysis, and DC conductivity measurements. We also demonstrated that the aligned PEDOT sheath/PLGA core fiber assemblies could be used in supporting and directing the extension of dorsal root ganglia (DRG) neurons in vitro.
| S-EPMC4322418 | biostudies-literature
Project description:Electrospinning is a straightforward, cost-effective, and versatile technique for fabrication of polymeric micro/nanofibers with tunable structural properties. Controlling the size, shape, and spatial orientation of the electrospun fibers is crucial for utilization in drug delivery and tissue engineering applications. In this study, for the first time, we systematically investigate the effect of processing parameters, including voltage, syringe needle gauge, angular velocity of rotating wheel, syringe-collector distance, and flow rate on the size and alignment of electrospun PLGA fibers. Optimizing these parameters enabled us to produce highly aligned and monodisperse PLGA fibers (spatial orientation> 99% and coefficient of variation< 0.5). To assess the effect of fiber alignment on the release of encapsulated drugs from these fibers, we incorporated dexamethasone, an anti-inflammatory drug, within highly-aligned and randomly-oriented fibers with comparable diameters (~0.87 μm) and compared their release profiles. In-vitro release studies revealed that the aligned fibers had less burst release (~10.8% in 24 hr) and more sustained release (~8.8% average rate of change for 24 days) compared to the random fibers. Finally, the degradation modes of the aligned and random fibers after 25 days incubation were characterized and compared. The findings of this study can be applied for the development of 3D degradable aligned fibers for controlled drug release and tissue engineering applications.
| S-EPMC6675471 | biostudies-literature
Project description:The fabrication of nanocomposite films and fibers based on cellulose nanocrystals (P-tCNCs) and a thermoplastic polyurethane (PU) elastomer is reported. High-aspect-ratio P-tCNCs were isolated from tunicates using phosphoric acid hydrolysis, which is a process that affords nanocrystals displaying high thermal stability. Nanocomposites were produced by solvent casting (films) or melt-mixing in a twin-screw extruder and subsequent melt-spinning (fibers). The processing protocols were found to affect the orientation of both PU hard segments and the P-tCNCs within the PU matrix and therefore the mechanical properties. While the films were isotropic, both the polymer matrix and the P-tCNCs proved to be aligned along the fiber direction in the fibers, as shown using SAXS/WAXS, angle-dependent Raman spectroscopy, and birefringence analysis. Tensile tests reveal that fibers and films, at similar P-tCNC contents, display Young's moduli and strain-at-break that are within the same order of magnitude, but the stress-at-break was found to be ten-times higher for fibers, conferring them a superior toughness over films.
| S-EPMC6960881 | biostudies-literature
Project description:Using medaka fish embryo model, toxic effects of silver nanocolloids (SNC, 3.8M-BM-11.0nm diameter) on developmental morphology and gene expression profile were investigated. SNC caused morphological changes in embryos including cardiovascular malformations, ischemia, underdeveloped central nervous system and eyes, and kyphosis at exposures of 0.5mg/L and 1.0mg/L.. To determine in vivo distribution of SNC, medaka embryos were exposed to 0.5mg/L for 6 days and subjected to ICP-OES analyses. Silver was detected in medaka embryos and chorion at levels of 16.6M-BM-19.3pg and 720M-BM-129pg, respectively. TEM analyses showed SNC adhered to the chorion surface and inside the chorion. On investigation of oxidative mechanism, NAC (0.05mM) rescued all embryos by 96-hr post treatment, while 0.5mM GSH did not. NAC blocked lipid peroxidation. Furthermore, medaka oligo DNA microarray and qRT-PCR were used for gene expression profiling in embryos exposed for 48-hr to 0.05mg/L SNC. Six genes relative to embryogenesis and morphogenesis such as ctsL, Tpm1, RBP, mt, atp2a1 and hox6b6 turned out to be affected and their involvement to the above malformations was implied. In conclusion, SNC causes gross malformations in the cardiovascular and central nervous systems in developing medaka embryos through potentially SNC-affected differential expression of a series of genes related to oxidative stress, embryonic cellular proliferation, and morphological development. Three of the stage-21 medaka embryos per sample were exposed in triplicate to 0mg/L (control) and 0.05mg/L SNC for 48 hours. Therefore, for each exposure condition nine of the stage-21 embryos were prepared and used in the SNC exposure test.
2012-06-16 | E-GEOD-33488 | biostudies-arrayexpress
Project description:In nature, bacteria often live in surface-associated communities known as biofilms. Biofilm-forming bacteria typically deposit a layer of polysaccharide on the surfaces they inhabit; hence, polysaccharide is their immediate environment on many surfaces. In this study, we examined how the physical characteristics of polysaccharide substrates influence the behavior of the biofilm-forming bacterium Myxococcus xanthus. M. xanthus responds to the compression-induced deformation of polysaccharide substrates by preferentially spreading across the surface perpendicular to the axis of compression. Our results suggest that M. xanthus is not responding to the water that accumulates on the surface of the polysaccharide substrate after compression or to compression-induced changes in surface topography such as the formation of troughs. These directed surface movements do, however, consistently match the orientation of the long axes of aligned and tightly packed polysaccharide fibers in compressed substrates, as indicated by behavioral, birefringence and small angle X-ray scattering analyses. Therefore, we suggest that the directed movements are a response to the physical arrangement of the polymers in the substrate and refer to the directed movements as polymertropism. This behavior might be a common property of bacteria, as many biofilm-forming bacteria that are rod-shaped and motile on soft surfaces exhibit polymertropism.
| S-EPMC5554183 | biostudies-literature
Project description:High temperature is required in carbon fiber synthesis in the carbonization step. However, direct high-temperature heating without the presence of additive materials would affect the yield and structure of carbon fibers produced. Thus, this study aims to synthesize carbon fibers from poly-vinyl alcohol (PVA), as the precursor and reducing agent, using silver nanoparticles (SNP) from silver nitrate (AgNO3) as additives. The pre-treatment of PVA was performed in three steps, i.e., mixing PVA/AgNO3, electrospinning, and iodination. The interaction of PVA and AgNO3 was assessed by FTIR, and SEM was used to characterize the electro-spun fibers prior and after iodination; Raman spectrophotometer was carried out to confirm the yield of carbon fibers. There was reduction in oxygen groups (3000-3800 cm-1) and emergence of -C=O (1100 cm-1) and -C=C- (1627 cm-1) functional groups, indicating formation of carbon layers. Based on the DT/GA results, the silver nanoparticles reduce the need of high temperature with optimum carbonization at 350 °C and lead to the formation of more regular graphene layers. Graphene layers with a size distribution of 0.438 nm and well-organized structures were successfully formed, and the Raman shifting showed higher intensities of G and G' bands in the presence of Ag. Based on DT/GA results, the yield of carbon fibers with iodinated PVA fibers and SNP as additive had higher rates around 800 µg/min, reaching 33% at 500 °C. Thus, it is demonstrated that iodinated PVA/AgNO3 samples can significantly improve carbon fiber yield at low temperatures.
| S-EPMC8839439 | biostudies-literature
Project description:Silver (Ag) is one of the seven metals of antiquity and an important engineering material in the electronic, medical, and chemical industries because of its unique noble and catalytic properties. Ag thin films are extensively used in modern electronics primarily because of their oxidation-resistance. Here we report a novel phenomenon of Ag nano-volcanic eruption that is caused by interactions between Ag and oxygen (O). It involves grain boundary liquation, the ejection of transient Ag-O fluids through grain boundaries, and the decomposition of Ag-O fluids into O2 gas and suspended Ag and Ag2O clusters. Subsequent coating with re-deposited Ag-O and the de-alloying of O yield a conformal amorphous Ag coating. Patterned Ag hillock arrays and direct Ag-to-Ag bonding can be formed by the homogenous crystallization of amorphous coatings. The Ag "nano-volcanic eruption" mechanism is elaborated, shedding light on a new mechanism of hillock formation and new applications of amorphous Ag coatings.
| S-EPMC5050507 | biostudies-literature
Project description:Using medaka fish embryo model, toxic effects of silver nanocolloids (SNC, 3.8±1.0nm diameter) on developmental morphology and gene expression profile were investigated. SNC caused morphological changes in embryos including cardiovascular malformations, ischemia, underdeveloped central nervous system and eyes, and kyphosis at exposures of 0.5mg/L and 1.0mg/L.. To determine in vivo distribution of SNC, medaka embryos were exposed to 0.5mg/L for 6 days and subjected to ICP-OES analyses. Silver was detected in medaka embryos and chorion at levels of 16.6±9.3pg and 720±29pg, respectively. TEM analyses showed SNC adhered to the chorion surface and inside the chorion. On investigation of oxidative mechanism, NAC (0.05mM) rescued all embryos by 96-hr post treatment, while 0.5mM GSH did not. NAC blocked lipid peroxidation. Furthermore, medaka oligo DNA microarray and qRT-PCR were used for gene expression profiling in embryos exposed for 48-hr to 0.05mg/L SNC. Six genes relative to embryogenesis and morphogenesis such as ctsL, Tpm1, RBP, mt, atp2a1 and hox6b6 turned out to be affected and their involvement to the above malformations was implied. In conclusion, SNC causes gross malformations in the cardiovascular and central nervous systems in developing medaka embryos through potentially SNC-affected differential expression of a series of genes related to oxidative stress, embryonic cellular proliferation, and morphological development.
2012-06-17 | GSE33488 | GEO
Project description:A free-standing, antibacterial hydrogel was fabricated using silver-nanoparticle-immobilized cellulose nanofibers (CNFs) and alginate. Surface hydroxyl groups of CNFs were oxidized to carboxylate groups using (2,2,6,6-tetramethylpiperidin-1-yl)oxidanyl (TCNF), followed by the treatment with silver nitrate solution for surface adsorption of silver ions. In situ reduction of silver ions to produce silver nanoparticles was performed for the silver-adsorbed CNFs. Electron microscopy, X-ray diffraction, and spectroscopic analysis revealed that higher amounts of silver nanoparticles were immobilized on the surface of TCNF than on the surface of native CNF. Silver-nanoparticle-immobilized TCNF was embedded in alginate gels and silver ions from the matrix were slowly released for 7 days. Silver-nanoparticle-loaded alginate gels showed comparable antibacterial activity to silver-ions-loaded alginate gels, although the former showed a significantly lower cytotoxicity against animal cells. Thus, the antibacterial gels can potentially be applied to various skin surfaces to prevent bacterial infection while minimizing skin damage.
| S-EPMC6643637 | biostudies-literature
Project description:IntroductionThe orientation of collagen fibers in native tissues plays an important role in cell signaling and mediates the progression of tumor cells in breast cancer by a contact guidance mechanism. Understanding how migration of epithelial cells is directed by the alignment of collagen fibers requires in vitro assays with standardized orientations of collagen fibers.MethodsTo address this issue, we produced micro-stripes with aligned collagen fibers using an easy-to-use and versatile approach based on the aspiration of a collagen solution within a microchannel. Glass coverslips were functionalized with a (3-aminopropyl)triethoxysilane/glutaraldehyde linkage to covalently anchor micro-stripes of aligned collagen fibers, whereas microchannels were functionalized with a poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) nonionic triblock polymer to prevent adhesion of the collagen micro-stripes.ResultsUsing this strategy, microchannels can be peeled off to expose micro-stripes of aligned collagen fibers without affecting their mechanical integrity. We used time-lapse confocal reflection microscopy to characterize the polymerization kinetics of collagen networks for different concentrations and the orientation of collagen fibers as a function of the microchannel width. Our results indicate a non-linear concentration dependence of the area of fluorescence, suggesting that the architecture of collagen networks is sensitive to small changes in concentration. We show the possibility to influence the collagen fibril coverage by adjusting the concentration of the collagen solution.ConclusionWe applied this novel approach to study the migration of epithelial cells, demonstrating that collagen micro-stripes with aligned fibers represent a valuable in-vitro assay for studying cell contact guidance mechanisms.
| S-EPMC6981333 | biostudies-literature