Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Solubilization of Hydrophobic Dyes in Surfactant Solutions.

ABSTRACT: In this paper, the use of surfactants for solubilization of hydrophobic organic dyes (mainly solvent and disperse dyes) has been reviewed. The effect of parameters such as the chemical structures of the surfactant and the dye, addition of salt and of polyelectrolytes, pH, and temperature on dye solubilization has been discussed. Surfactant self-assemble into micelles in aqueous solution and below the concentration where this occurs-the critical micelle concentration (CMC)-there is no solubilization. Above the CMC, the amount of solubilized dye increases linearly with the increase in surfactant concentration. It is demonstrated that different surfactants work best for different dyes. In general, nonionic surfactants have higher solubilization power than anionic and cationic surfactants. It is likely that the reason for the good performance of nonionic surfactants is that they allow dyes to be accommodated not only in the inner, hydrocarbon part of the micelle but also in the headgroup shell. It is demonstrated that the location of a dye in a surfactant micelle can be assessed from the absorption spectrum of the dye-containing micellar solution.

SUBMITTER: Tehrani-Bagha AR

PROVIDER: S-EPMC5452102 | biostudies-other | 2013 Feb

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Solubilization of Hydrophobic Catalysts Using Nanoparticle Hosts.

Project description:A modular strategy for the solubilization and protection of hydrophobic transition metal catalysts using the hydrophobic pockets of water soluble gold nanoparticles is reported. Besides preserving original catalyst activity, this encapsulation strategy provides a protective environment for the hydrophobic catalyst and brings reusability. This system provides a versatile platform for the encapsulation of different hydrophobic transition metal catalysts, allowing a wide range of catalysis in water while uniting the advantages of homogeneous and heterogeneous catalysis in the same system.

| S-EPMC5848072 | biostudies-literature

Towards Rational Biosurfactant Design-Predicting Solubilization in Rhamnolipid Solutions.

Project description:The efficiency of micellar solubilization is dictated inter alia by the properties of the solubilizate, the type of surfactant, and environmental conditions of the process. We, therefore, hypothesized that using the descriptors of the aforementioned features we can predict the solubilization efficiency, expressed as molar solubilization ratio (MSR). In other words, we aimed at creating a model to find the optimal surfactant and environmental conditions in order to solubilize the substance of interest (oil, drug, etc.). We focused specifically on the solubilization in biosurfactant solutions. We collected data from literature covering the last 38 years and supplemented them with our experimental data for different biosurfactant preparations. Evolutionary algorithm (EA) and kernel support vector machines (KSVM) were used to create predictive relationships. The descriptors of biosurfactant (logPBS, measure of purity), solubilizate (logPsol, molecular volume), and descriptors of conditions of the measurement (T and pH) were used for modelling. We have shown that the MSR can be successfully predicted using EAs, with a mean R2val of 0.773 ± 0.052. The parameters influencing the solubilization efficiency were ranked upon their significance. This represents the first attempt in literature to predict the MSR with the MSR calculator delivered as a result of our research.

| S-EPMC7864340 | biostudies-literature

Hydrophobic surfactant proteins strongly induce negative curvature.

Project description:The hydrophobic surfactant proteins SP-B and SP-C greatly accelerate the adsorption of vesicles containing the surfactant lipids to form a film that lowers the surface tension of the air/water interface in the lungs. Pulmonary surfactant enters the interface by a process analogous to the fusion of two vesicles. As with fusion, several factors affect adsorption according to how they alter the curvature of lipid leaflets, suggesting that adsorption proceeds via a rate-limiting structure with negative curvature, in which the hydrophilic face of the phospholipid leaflets is concave. In the studies reported here, we tested whether the surfactant proteins might promote adsorption by inducing lipids to adopt a more negative curvature, closer to the configuration of the hypothetical intermediate. Our experiments used x-ray diffraction to determine how the proteins in their physiological ratio affect the radius of cylindrical monolayers in the negatively curved, inverse hexagonal phase. With binary mixtures of dioleoylphosphatidylethanolamine (DOPE) and dioleoylphosphatidylcholine (DOPC), the proteins produced a dose-related effect on curvature that depended on the phospholipid composition. With DOPE alone, the proteins produced no change. With an increasing mol fraction of DOPC, the response to the proteins increased, reaching a maximum 50% reduction in cylindrical radius at 5% (w/w) protein. This change represented a doubling of curvature at the outer cylindrical surface. The change in spontaneous curvature, defined at approximately the level of the glycerol group, would be greater. Analysis of the results in terms of a Langmuir model for binding to a surface suggests that the effect of the lipids is consistent with a change in the maximum binding capacity. Our findings show that surfactant proteins can promote negative curvature, and support the possibility that they facilitate adsorption by that mechanism.

| S-EPMC4571016 | biostudies-literature

Surfactant-Mediated Solubilization of Magnetically Separable Nanocatalysts for the Oxidation of Alcohols.

Project description:Cetrimonium bromide (CTAB)-coated water disperse magnetically separable nanocatalysts CTAB/Fe3O4@dopa@ML (M = Fe or Mn, L = cyclohexane-1,2-diylbis(azanylylidene)bis(methanylylidene)bis(2,4-diXphenol; X = Cl, Br, and I) have been synthesized using a simple synthetic strategy. This approach provides a new fruitful strategy to reduce the leaching of the active metal complex from the catalyst surface to the aqueous media. The synthesized catalysts have been found to be excellent for oxidation of alcohols in aqueous medium at room temperature. A probable catalytic pathway involving the generation of hydroperoxo intermediates has been assumed, and these intermediates have been characterized using density functional theory and several spectroscopic techniques. It is worthy of mention that the synthesized CTAB-coated magnetically separable nanocatalysts can be magnetically recovered from the aqueous reaction mixture after more than five cycles, which renders this approach as a sustainable and accessible one.

| S-EPMC6682040 | biostudies-literature

Solubilization and thermodynamic properties of simvastatin in various micellar solutions of different non-ionic surfactants: Computational modeling and solubilization capacity.

Project description:The aim of this work was to solubilize simvastatin (SIM) using different micellar solutions of various non-ionic surfactants such as Tween-80 (T80), Tween-20 (T20), Myrj-52 (M52), Myrj-59 (M59), Brij-35 (B35) and Brij-58 (B58). The solubility of SIM in water (H2O) and different micellar concentrations of T80, T20, M52, M59, B35 and B58 was determined at temperatures T = 300.2 K to 320.2 K under atmospheric pressure p = 0.1 MPa using saturation shake flask method. The experimental solubility data of SIM was regressed using van't Hoff and Apelblat models. The solubility of SIM (mole fraction) was recorded highest in M59 (1.54 x 10-2) followed by M52 (6.56 x 10-3), B58 (5.52 x 10-3), B35 (3.97 x 10-3), T80 (1.68 x 10-3), T20 (1.16 x 10-3) [the concentration of surfactants was 20 mM in H2O in all cases] and H2O (1.94 x 10-6) at T = 320.2 K. The same results were also recorded at each temperature and each micellar concentration of T80, T20, M52, M59, B35 and B58. "Apparent thermodynamic analysis" showed endothermic and entropy-driven dissolution/solubilization of SIM in H2O and various micellar solutions of T80, T20, M52, M59, B35 and B58.

| S-EPMC8031458 | biostudies-literature

Probing Nanoscale Thermal Transport in Surfactant Solutions.

Project description:Surfactant solutions typically feature tunable nanoscale, internal structures. Although rarely utilized, they can be a powerful platform for probing thermal transport in nanoscale domains and across interfaces with nanometer-size radius. Here, we examine the structure and thermal transport in solution of AOT (Dioctyl sodium sulfosuccinate) in n-octane liquids using small-angle neutron scattering, thermal conductivity measurements, and molecular dynamics simulations. We report the first experimental observation of a minimum thermal conductivity occurring at the critical micelle concentration (CMC): the thermal conductivity of the surfactant solution decreases as AOT is added till the onset of micellization but increases as more AOT is added. The decrease of thermal conductivity with AOT loading in solutions in which AOT molecules are dispersed as monomers suggests that even the interfaces between individual oleophobic headgroup of AOT molecules and their surrounding non-polar octane molecules can hinder heat transfer. The increase of thermal conductivity with AOT loading after the onset of micellization indicates that the thermal transport in the core of AOT micelles and across the surfactant-oil interfaces, both of which span only a few nanometers, are efficient.

| S-EPMC4631999 | biostudies-other

A Monolayer Partitioning Scheme for Droplets of Surfactant Solutions.

Project description:Bulk-surface partitioning of surface active species affects both cloud droplet activation by aerosol particles and heterogeneous atmospheric chemistry. Various approaches are given in the literature to capture this effect in atmospheric models. Here we present a simple, yet physically self-contained, monolayer model for prediction of both composition and thickness of the surface layer of an aqueous droplet. The monolayer surface model is based on assuming a finite surface layer and mass balance of all species within the droplet. Model predictions are presented for binary and ternary aqueous surfactant model systems and compared to both experimental and model data from the literature and predictions using a common Gibbsian model approach. Deviations from Gibbsian surface thermodynamics due to volume constraints imposed by the finite monolayer lead to stronger predicted surface tension reduction at smaller droplet sizes with the monolayer model. Process dynamics of the presented monolayer model are also contrasted to other recently proposed approaches to treating surface partitioning in droplets, with different underlying assumptions.

| S-EPMC6472654 | biostudies-literature

Hydrophobic surfactant proteins induce a phosphatidylethanolamine to form cubic phases.

Project description:The hydrophobic surfactant proteins SP-B and SP-C promote rapid adsorption of pulmonary surfactant to an air/water interface. Previous evidence suggests that they achieve this effect by facilitating the formation of a rate-limiting negatively curved stalk between the vesicular bilayer and the interface. To determine whether the proteins can alter the curvature of lipid leaflets, we used x-ray diffraction to investigate how the physiological mixture of these proteins affects structures formed by 1-palmitoyl-2-oleoyl phosphatidylethanolamine, which by itself undergoes the lamellar-to-inverse hexagonal phase transition at 71 degrees C. In amounts as low as 0.03% (w:w) and at temperatures as low as 57 degrees C, the proteins induce formation of bicontinuous inverse cubic phases. The proteins produce a dose-related shift of diffracted intensity to the cubic phases, with minimal evidence of other structures above 0.1% and 62 degrees C, but no change in the lattice-constants of the lamellar or cubic phases. The induction of the bicontinuous cubic phases, in which the individual lipid leaflets have the same saddle-shaped curvature as the hypothetical stalk-intermediate, supports the proposed model of how the surfactant proteins promote adsorption.

| S-EPMC2856140 | biostudies-literature

Deep Eutectic Solvent Aqueous Solutions as Efficient Media for the Solubilization of Hardwood Xylans.

Project description:This work contributes to the development of integrated lignocellulosic-based biorefineries by the pioneering exploitation of hardwood xylans by solubilization and extraction in deep eutectic solvents (DES). DES formed by choline chloride and urea or acetic acid were initially evaluated as solvents for commercial xylan as a model compound. The effects of temperature, molar ratio, and concentration of the DES aqueous solutions were evaluated and optimized by using a response surface methodology. The results obtained demonstrated the potential of these solvents, with 328.23?g?L-1 of xylan solubilization using 66.7?wt?% DES in water at 80?°C. Furthermore, xylans could be recovered by precipitation from the DES aqueous media in yields above 90?%. The detailed characterization of the xylans recovered after solubilization in aqueous DES demonstrated that 4-O-methyl groups were eliminated from the 4-O-methylglucuronic acids moieties and uronic acids (15?%) were cleaved from the xylan backbone during this process. The similar Mw values of both pristine and recovered xylans confirmed the success of the reported procedure. DES recovery in four additional extraction cycles was also demonstrated. Finally, the successful extraction of xylans from Eucalyptus globulus wood by using aqueous solutions of DES was demonstrated.

| S-EPMC6191028 | biostudies-literature

Nonionic Microemulsions as Solubilizers of Hydrophobic Drugs: Solubilization of Paclitaxel.

Project description:The strategy using nonionic microemulsion as a solubilizer for hydrophobic drugs was studied and is demonstrated in this work. The aqueous phase behaviors of mixed nonionic surfactants with various oils at 37 °C are firstly constructed to give the optimal formulations of nonionic microemulsions with applications in the enhanced solubilization of the model hydrophobic drug, paclitaxel, at 37 °C. Briefly, the suitable oil phase with paclitaxel significantly dissolved is microemulsified with appropriate surfactants. Surfactants utilized include Tween 80, Cremophor EL, and polyethylene glycol (4.3) cocoyl ether, while various kinds of edible oils and fatty esters are used as the oil phase. On average, the apparent solubility of paclitaxel is increased to ca. 70-100 ppm in the prepared microemulsions at 37 °C using tributyrin or ethyl caproate as the oil phases. The sizes of the microemulsions attained are mostly from ca. 60 nm to ca. 200 nm. The cytotoxicity of the microemulsion formulations is assessed with the cellular viability of 3T3 cells. In general, the cell viability is above 55% after 24 h of cultivation in media containing these microemulsion formulations diluted to a concentration of total surfactants equal to 50 ppm and 200 ppm.

| S-EPMC5457098 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data