Recent Progress in Advanced Materials for Lithium Ion Batteries.
Ontology highlight
ABSTRACT:
SUBMITTER: Chen J
PROVIDER: S-EPMC5452126 | biostudies-other | 2013 Jan
REPOSITORIES: biostudies-other
Similar Datasets
Project description:This review presents a survey of the literature on recent progress in lithium-ion batteries, with the active sub-micron-sized particles of the positive electrode chosen in the family of lamellar compounds LiMO₂, where M stands for a mixture of Ni, Mn, Co elements, and in the family of yLi₂MnO₃•(1 - y)LiNi½Mn½O₂ layered-layered integrated materials. The structural, physical, and chemical properties of these cathode elements are reported and discussed as a function of all the synthesis parameters, which include the choice of the precursors and of the chelating agent, and as a function of the relative concentrations of the M cations and composition y. Their electrochemical properties are also reported and discussed to determine the optimum compositions in order to obtain the best electrochemical performance while maintaining the structural integrity of the electrode lattice during cycling.
| S-EPMC5456936 | biostudies-other
Project description:To explore anode materials with large capacities and high rate performances for the lithium-ion batteries of electric vehicles, defective Ti2Nb10O27.1 has been prepared through a facile solid-state reaction in argon. X-ray diffractions combined with Rietveld refinements indicate that Ti2Nb10O27.1 has the same crystal structure with stoichiometric Ti2Nb10O29 (Wadsley-Roth shear structure with A2/m space group) but larger lattice parameters and 6.6% O(2-) vacancies (vs. all O(2-) ions). The electronic conductivity and Li(+)ion diffusion coefficient of Ti2Nb10O27.1 are at least six orders of magnitude and ~2.5 times larger than those of Ti2Nb10O29, respectively. First-principles calculations reveal that the significantly enhanced electronic conductivity is attributed to the formation of impurity bands in Ti2Nb10O29-x and its conductor characteristic. As a result of the improvements in the electronic and ionic conductivities, Ti2Nb10O27.1 exhibits not only a large initial discharge capacity of 329 mAh g(-1) and charge capacity of 286 mAh g(-1) at 0.1 C but also an outstanding rate performance and cyclability. At 5 C, its charge capacity remains 180 mAh g(-1) with large capacity retention of 91.0% after 100 cycles, whereas those of Ti2Nb10O29 are only 90 mAh g(-1) and 74.7%.
| S-EPMC4668578 | biostudies-literature
Project description:Lithium-ion batteries are crucial to the future of energy storage. However, the energy density of current lithium-ion batteries is insufficient for future applications. Sulfur cathodes and silicon anodes have garnered a lot of attention in the field due their high capacity potential. Although recent developments in sulfur and silicon electrodes show exciting results in half cell formats, neither electrode can act as a lithium source when put together into a full cell format. Current methods toward incorporating lithium in sulfur-silicon full cells involves prelithiating silicon or using lithium sulfide. These methods however, complicate material processing and creates safety hazards. Herein, we present a novel full cell battery architecture that bypasses the issues associated with current methods. This battery architecture gradually integrates controlled amounts of pure lithium into the system by allowing lithium the access to external circuit. A high specific energy density of 350 Wh/kg after 250 cycles at C/10 was achieved using this method. This work should pave the way for future researches into sulfur-silicon full cells.
| S-EPMC5722921 | biostudies-literature
Project description:Aqueous non-lithium based rechargeable batteries are emerging as promising energy storage devices thanks to their attractive rate capacities, long-cycle life, high safety, low cost, environmental-friendliness, and easy assembly conditions. However, the aqueous electrolytes with high ionic conductivity are always restricted by their intrinsically narrow electrochemical window. Encouragingly, the highly concentrated "water-in-salt" (WIS) electrolytes can efficiently expand the stable operation window, which brings up a series of aqueous high-voltage rechargeable batteries. In the mini review, we summarize the latest progress and contributions of various aqueous electrolytes for non-lithium (Na+, K+, Zn2+, Mg2+, and Al3+) based rechargeable batteries, and give a brief exploration of the operating mechanisms of WIS electrolytes in expanding electrochemically stable windows. Challenges and prospects are also proposed for WIS electrolytes toward aqueous non-lithium rechargeable metal ion batteries.
| S-EPMC7427340 | biostudies-literature
Project description:Li2ZrO3-coated and Al-doped micro-sized monocrystalline LiMn2O4 powder is synthesized through solid-state reaction, and the electrochemical performance is investigated as cathode materials for lithium-ion batteries. It is found that Li2ZrO3-coated LiAl0.06Mn1.94O4 delivers a discharge capacity of 110.90 mAhg-1 with 94% capacity retention after 200 cycles at room temperature and a discharge capacity of 104.4 mAhg-1 with a capacity retention of 87.8% after 100 cycles at 55 °C. Moreover, Li2ZrO3-coated LiAl0.06Mn1.94O4 could retain 87.5% of its initial capacity at 5C rate. This superior cycling and rate performance can be greatly contributed to the synergistic effect of Al-doping and Li2ZrO3-coating.
| S-EPMC8709395 | biostudies-literature
Project description:In this work, we designed and successfully synthesized an interconnected carbon nanosheet/MoS2/polyaniline hybrid (ICN/MoS2/PANI) by combining the hydrothermal method and in situ chemical oxidative polymerization. The as-synthesized ICNs/MoS2/PANI hybrid showed a "caramel treat-like" architecture in which the sisal fiber derived ICNs were used as hosts to grow "follower-like" MoS2 nanostructures, and the PANI film was controllably grown on the surface of ICNs and MoS2. As a LIBs anode material, the ICN/MoS2/PANI electrode possesses excellent cycling performance, superior rate capability, and high reversible capacity. The reversible capacity retains 583 mA h/g after 400 cycles at a high current density of 2 A/g. The standout electrochemical performance of the ICN/MoS2/PANI electrode can be attributed to the synergistic effects of ICNs, MoS2 nanostructures, and PANI. The ICN framework can buffer the volume change of MoS2, facilitate electron transfer, and supply more lithium inset sites. The MoS2 nanostructures provide superior rate capability and reversible capacity, and the PANI coating can further buffer the volume change and facilitate electron transfer.
| S-EPMC8233771 | biostudies-literature
Project description:Transparent devices have recently attracted substantial attention. Various applications have been demonstrated, including displays, touch screens, and solar cells; however, transparent batteries, a key component in fully integrated transparent devices, have not yet been reported. As battery electrode materials are not transparent and have to be thick enough to store energy, the traditional approach of using thin films for transparent devices is not suitable. Here we demonstrate a grid-structured electrode to solve this dilemma, which is fabricated by a microfluidics-assisted method. The feature dimension in the electrode is below the resolution limit of human eyes, and, thus, the electrode appears transparent. Moreover, by aligning multiple electrodes together, the amount of energy stored increases readily without sacrificing the transparency. This results in a battery with energy density of 10 Wh/L at a transparency of 60%. The device is also flexible, further broadening their potential applications. The transparent device configuration also allows in situ Raman study of fundamental electrochemical reactions in batteries.
| S-EPMC3156205 | biostudies-literature
Project description:Metal-organic frameworks (MOFs) have gained increased attention due to their unique features, including tunable pore sizes, controllable structures and a large specific surface area. In addition to their application in gas adsorption and separation, hydrogen storage, optics, magnetism and organic drug carriers, MOFs also can be used in batteries and supercapacitors which have attracted the researcher's attention. Based on recent studies, this review describes the latest developments about MOFs as battery electrode materials which are used in lithium-ion and lithium-sulfur batteries.
| S-EPMC6689647 | biostudies-literature
Project description:The volume expansion during Li ion insertion/extraction remains an obstacle for the application of Sn-based anode in lithium ion-batteries. Herein, the nanoporous (np) Cu6Sn5 alloy and Cu6Sn5/Sn composite were applied as a lithium-ion battery anode. The as-dealloyed np-Cu6Sn5 has an ultrafine ligament size of 40 nm and a high BET-specific area of 15.9 m2 g-1. The anode shows an initial discharge capacity as high as 1200 mA h g-1, and it remains a capacity of higher than 600 mA h g-1 for the initial five cycles at 0.1 A g-1. After 100 cycles, the anode maintains a stable capacity higher than 200 mA h g-1 for at least 350 cycles, with outstanding Coulombic efficiency. The ex situ XRD patterns reveal the reverse phase transformation between Cu6Sn5 and Li2CuSn. The Cu6Sn5/Sn composite presents a similar cycling performance with a slightly inferior rate performance compared to np-Cu6Sn5. The study demonstrates that dealloyed nanoporous Cu6Sn5 alloy could be a promising candidate for lithium-ion batteries.
| S-EPMC8346966 | biostudies-literature
Project description:Serving as conductive matrix and stress buffer, the carbon matrix plays a pivotal role in enabling red phosphorus to be a promising anode material for high capacity lithium ion batteries and sodium ion batteries. In this paper, nitrogen-doping is proved to effective enhance the interface interaction between carbon and red phosphorus. In detail, the adsorption energy between phosphorus atoms and oxygen-containing functional groups on the carbon is significantly reduced by nitrogen doping, as verified by X-ray photoelectron spectroscopy. The adsorption mechanisms are further revealed on the basis of DFT (the first density functional theory) calculations. The RPNC (red phosphorus/nitrogen-doped carbon composite) material shows higher cycling stability and higher capacity than that of RPC (red phosphorus/carbon composite) anode. After 100 cycles, the RPNC still keeps discharge capacity of 1453 mAh g-1 at the current density of 300 mA g-1 (the discharge capacity of RPC after 100 cycles is 1348 mAh g-1). Even at 1200 mA g-1, the RPNC composite still delivers a capacity of 1178 mAh g-1. This work provides insight information about the interface interactions between composite materials, as well as new technology develops high performance phosphorus based anode materials.
| S-EPMC5793632 | biostudies-literature