Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A Novel Hydrazinecarbothioamide as a Potential Corrosion Inhibitor for Mild Steel in HCl.

ABSTRACT: 2-(1-methyl-4-((E)-(2-methylbenzylidene)amino)-2-phenyl-1H-pyrazol-3(2H)-ylidene)-hydrazineecarbothioamide (HCB) was synthesized as a corrosion inhibitor from the reaction of 4-aminoantipyrine, thiosemicarbazide and 2-methylbenzaldehyde. The corrosion inhibitory effects of HCB on mild steel in 1.0 M HCl were investigated using potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS). The results showed that HCB inhibited mild steel corrosion in acidic solution and inhibition efficiency increased with an increase in the concentration of the inhibitor. The inhibition efficiency was up to 96.5% at 5.0 mM. Changes in the impedance parameters suggested that HCB adsorbed on the surface of mild steel, leading to the formation of a protective film. The novel corrosion inhibitor synthesized in the present study was characterized using Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR) spectral data.

SUBMITTER: Al-Amiery AA

PROVIDER: S-EPMC5452315 | biostudies-other | 2013 Apr

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Novel Corrosion Inhibitor for Mild Steel in HCl.

Project description:Corrosion inhibitory effects of new synthesized compound namely 5,5'- ((1Z,1'Z)-(1,4-phenylenebis(methanylylidene))bis(azanylylidene))bis(1,3,4-thiadiazole-2-thiol) (PBB) on mild steel in 1.0 M HCl was investigated at different temperatures using open circuit potential (OCP), potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS). Results showed that PBB inhibited mild steel corrosion in acid solution and indicated that the inhibition efficiencies increased with the concentration of inhibitor, but decreased proportionally with temperature. Changes in impedance parameters suggested the adsorption of PBB on the mild steel surface, leading to the formation of protective films.

| S-EPMC5453103 | biostudies-other

Biogenic corrosion inhibitor on mild steel protection in concentrated HCl medium.

Project description:Turbinaria ornata (TO) extract was tested as green corrosion inhibitor on mild steel (MS) coupons in conc. HCl medium with an efficiency of 100% at 25?g?l-1 during 5?min exposure. Antibacterial efficacy performed against 16?S rDNA identified marine biofilming bacteria (MBB) and human pathogenic bacteria (HPB). Maximum inhibition growth was 16?mm on MBB observed in Bacillus megaterium (MBF14 - AB894827) and 20?mm on HPB in Escherichia coli (B5 - NCIM 2931). Similarly, minimum of 10?mm on MBB witnessed in Pseudomonas sp., (MBF9 - AB894829). Toxicity studies proved 50.0% LC50 at 500??g?ml-1 in 24?hrs, whereas Balanus amphitrite resulted in 100% mortality within 12?hrs. Results including weight loss, potentiodynamic polarization and electrochemical impedance spectroscopy, FT-IR and GC-MS confirm 10-Octadecaonic acid as a major corrosion inhibitor from T. ornata and is discovered as a novel antifoulant. Anticorrosion formulation will become available soon.

| S-EPMC5805700 | biostudies-literature

Application of Unsaturated Fatty Acid Molecules Derived from Microalgae toward Mild Steel Corrosion Inhibition in HCl Solution: A Novel Approach for Metal-Inhibitor Association.

Project description:Fatty acid molecules 9,12,15-octadecatrienoic acid (C18:3), 9,12-octadecadienoic acid (C18:2), and hexadecanoic acid (C16:0) possessing active functional groups with the capability of fast electron transfer have been established for effective corrosion inhibition of mild steel. In this regard, a microalga Scenedesmus sp. is isolated and its fatty acids have been studied to corroborate the adsorption behavior, attributing the anticorrosion efficacy on mild steel in 1 M HCl solution by forming metal-inhibitor framework. Electrochemical analysis has been used to ascertain the surpassing corrosion inhibition efficiency at an optimal concentration of 36 ppm with maximum 95.1% inhibitive performance. The results of metallography with or without the inhibitor molecules have indicated significant changes in surface morphology of mild steel specimen for gradual enhancement in immersion time (72 h). Hydrogen evolution reaction has been emphasized to observe the tendency of significant decrease in the bubble formation in the presence of inhibitor compared to 1 M HCl solution only. Surface morphometric studies (scanning electron microscopy and atomic force microscopy) have also revealed the excellent adsorption capacity of Scenedesmus fatty acids on metal surface. Quantum chemical calculations, performed by density functional theory, determined significant adsorption effectiveness, based on the donor-acceptor capability between metallic surface and inhibitor molecules.

| S-EPMC6217523 | biostudies-literature

AEO7 Surfactant as an Eco-Friendly Corrosion Inhibitor for Carbon Steel in HCl solution.

Project description:The impact of AEO7 surfactant on the corrosion inhibition of carbon steel (C-steel) in 0.5?M HCl solution at temperatures between 20?°C and 50?°C was elucidated using weight loss and different electrochemical techniques. The kinetics and thermodynamic parameters of the corrosion and inhibition processes were reported. The corrosion inhibition efficiency (IE%) improved as the concentration of AEO7 increased. In addition, a synergistic effect was observed when a concentration of 1?×?10-3?mol?L-1 or higher of potassium iodide (KI) was added to 40 µmol L-1 of the AEO7 inhibitor where the corrosion IE% increased from 87.4% to 99.2%. Also, it was found that the adsorption of AEO7 surfactant on C-steel surface followed the Freundlich isotherm. Furthermore, electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization measurements indicated that AEO7 was physically adsorbed on the steel surface. The surface topography was examined using an optical profilometer, an atomic force microscope (AFM), and a scanning electron-microscope (SEM) coupled with an energy dispersion X-ray (EDX) unit. Quantum chemical calculations based on the density functional theory were performed to understand the relationship between the corrosion IE% and the molecular structure of the AEO7 molecule.

| S-EPMC6381149 | biostudies-literature

Cysteine-silver-gold Nanocomposite as potential stable green corrosion inhibitor for mild steel under acidic condition.

Project description:Cysteine based silver-gold nanocomposite (Cys/Ag-Au NCz) was synthesized, this was followed by its characterization using Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Ultraviolet-visible spectroscopy (UV-Vis), Scanning electron microscopy (SEM), Energy-dispersive X-ray spectroscopy (EDAX), Thermogravimetric analysis (TGA) and Transmission electron microscopy (TEM). Cys/Ag-Au NCz was studied as novel green corrosion inhibitor for mild steel in 1M HCl solution at varying concentration and temperature using gravimetric, Potentiodynamic polarization (PDP), Electrochemical impedance spectroscopy (EIS), SEM, EDAX and FTIR. Weight loss, PDP and EIS studies confirmed Cys/Ag-Au NCz as efficient corrosion inhibitor at moderately low concentration. The maximum inhibition efficiency of 96 % was observed at 303 K at 300 ppm. Cys/Ag-Au NCz acted by affecting both anodic and cathodic processes and its adsorption on steel surface followed the Langmuir adsorption isotherm. EIS data displayed the existence of protective film at mild steel/solution interface in Cys/Ag-Au NCz inhibited system. SEM micrograph in presence of Cys/Ag-Au NCz inhibited acid solution displayed better morphology as compared to blank solution. The UV-Vis and FTIR data indicates good interaction between the Cys/Ag-Au NCz and steel surface.

| S-EPMC6959314 | biostudies-literature

Biopolymer from Tragacanth Gum as a Green Corrosion Inhibitor for Carbon Steel in 1 M HCl Solution.

Project description:A biopolymer from tragacanth gum, arabinogalactan (AG), was investigated for its adsorption and corrosion inhibition traits for carbon steel corrosion in 1 M HCl. Gravimetric method, potentiodynamic polarization measurements, electrochemical impedance spectroscopy, UV-visible spectroscopy, scanning electron microscopy, and atomic force microscopy were used to judge the adsorptive nature of AG in the acid solution. The inhibition efficiency improved with an increase in AG concentration and temperature of the acid solution. Thermodynamic and activation parameters (ΔG ads, E a, ΔH, and ΔS) were also calculated and discussed. The adsorption of AG favored Langmuir adsorption isotherm. The results of corrosion tests confirmed that AG could serve as an efficient green corrosion inhibitor for the carbon steel in 1 M HCl, yielding high efficiency and a low risk of environmental pollution. Theoretical quantum chemical and Monte Carlo simulation studies corroborated the experimental results.

| S-EPMC6641194 | biostudies-literature

Novel synthesized triazole derivatives as effective corrosion inhibitors for carbon steel in 1M HCl solution: experimental and computational studies.

Project description:This article outlines the synthesis of two derivatives of 4-amino-5-hydrazineyl-4H-1,2,4-triazole-3-thiol for the prevention of carbon steel corrosion in 1M HCl solution. These derivatives are (Z)-3-(1-(2-(4-amino-5-mercapto-4H-1,2,4-triazol-3-yl)hydrazono)ethyl)-2H-chromen-2-one (TZ1) and 5-(2-(9H-fluoren-9-ylidene)hydrazineyl)-4-amino-4H-1,2,4-triazole-3-thiol (TZ2). Weight loss, electrochemical experiments, surface examinations, and theoretical computation are used to evaluate the effectiveness of the two compounds to be used as corrosion inhibitors. Weight loss and electrochemical studies demonstrate that these derivatives reduce the corrosion rate of carbon steel. To examine the morphology and constitution of the carbon steel surface submerged in HCl solution as well as after adding inhibitors, surface examination tests are performed. Analysis of the test solution via UV-visible spectroscopy is employed to check the possibility of complex formation between inhibitor molecules and Fe2+ ions released during the corrosion process. In order to explore their biological activity, the antibacterial activity was investigated against (E. coli and Bacillus subtilis). Finally, theoretical confirmation of the experimental findings is provided by quantum chemical (DFT) and Monte Carlo (MC) simulation studies. More adsorption sites are present in the derivatives of 4-amino-5-hydrazineyl-4H-1,2,4-triazole-3-thiol, which offer a novel perspective for developing new classes of corrosion inhibitors with substantial protective efficacy, especially at high temperatures.

| S-EPMC10719362 | biostudies-literature

Donor-π-Acceptor-Type Configured, Dimethylamino-Based Organic Push-Pull Chromophores for Effective Reduction of Mild Steel Corrosion Loss in 1 M HCl.

Project description:In this work, donor-π-acceptor-type four crystalline compounds have been tested for the first time to restrict the corrosion of mild steel in 1 M HCl. The details of the compounds are: C1, 4-N,N-dimethylamino-β-nitrostyrene; C2, 2-(4-(dimethylamino) benzylidene)malononitrile; C3, ethyl 2-cyano-3-(4-(dimethylamino) phenyl)acrylate; and C4, methyl 2-cyano-3-(4-(dimethylamino)phenyl)acrylate. The corrosion inhibition potentials of the compounds have been primarily investigated by electrochemical techniques, such as linear polarization resistance, Tafel polarization curves, and electrochemical impedance spectroscopy. The secondary investigation is performed by scanning electron microscopy, fluorescence surface imaging, spectroscopic techniques (UV-visible and Fourier transform infrared spectroscopy), and X-ray diffraction patterns. The results disclosed that 50 mg L-1 of the compounds (1-4) in 1 M HCl provided the maximum inhibition efficiency as 93% (1), 88% (2), 82% (3), and 86% (4). The function of the compounds as corrosion inhibitors is explained with equilibrium corrosion potential, adsorption isotherms, and the frontier molecular orbital energies of the compounds (E HOMO and E LUMO) estimated by cyclic voltammetry curves and UV-visible spectra.

| S-EPMC6641366 | biostudies-literature

N,N'-Dialkylcystine Gemini and Monomeric N-Alkyl Cysteine Surfactants as Corrosion Inhibitors on Mild Steel Corrosion in 1 M HCl Solution: A Comparative Study.

Project description:Gemini surfactant, N,N'-dialkylcystine 2(C12Cys), derived from cystine, and a monomeric N-alkyl cysteine counterpart, (C12Cys), were synthesized and purified. The characterization of surfactants 2(C12Cys) and (C12Cys) was made by Fourier transform infrared, 1H NMR, and elemental analysis. The effect of 2(C12Cys) and (C12Cys) on mild steel (MS) corrosion in 1 M HCl solution was explored as a function of their concentration and electrolyte temperature by means of gravimetric and electrochemical experiments (potentiodynamic polarization and Electrochemical impedance spectroscopy), surface analytical techniques (scanning electron microscopy (SEM)/energy dispersive X-ray spectroscopy (EDAX) and atomic force microscopy (AFM)) and theoretical study. The investigated compounds exhibited surface active properties and performed as good inhibitors for corrosion control of mild steel (MS) in acid solution. However, compared to monomeric (C12Cys), Gemini surfactant 2(C12Cys) showed high corrosion inhibiting ability at very low concentration. The EIS results revealed a greater charge transfer resistance in 2(C12Cys) solution compared to that in (C12Cys) solution. SEM/EDAX observations validate the development of an inhibitive film by the adsorbed molecules of surfactant on the MS surface. The AFM micrographs supported the SEM/EDAX results and exhibited a lowering in the roughness of the corroded MS surface in the presence of both (C12Cys) and 2(C12Cys) surfactants. Further, quantum chemical calculations and Monte Carlo simulations were used to study the dependence of corrosion inhibiting efficacy on the molecular structure and adsorption strength.

| S-EPMC6644482 | biostudies-literature

Investigation of olive leaf extract as a potential environmentally-friendly corrosion inhibitor for carbon steel.

Project description:Corrosion constitutes a significant issue in industries that handle metals. Corrosion inhibitors with a low impact on the environment provide a significant economic benefit in various engineering applications. In this work, the effectiveness of olive leaves extract is evaluated as a cost-effective and environmentally-friendly corrosion inhibitor. The corrosion of carbon steel in different concentrations of hydrochloric acid (0.1, 1.0, and 2.0 M) when protected by an aqueous solution of olive leaf extract of concentrations ranging from 10 to 60 ppm is investigated. A green extraction process based upon water extraction is used to ensure minimum impact on the environment. Results show that the corrosion inhibition efficiency increased as the concentration of the olive leaf extract increased. An analysis of variance showed a significant effect of acidic molarity, temperature, and inhibitor concentration on the corrosion rate. A significant statistical model indicates that the inhibitor exhibits higher efficiencies at higher acidic molarity. Results of SEM and EDX also demonstrated that a protective film of the inhibitor on the specimen surface plays a role in corrosion inhibition, suggesting that the inhibitor molecules are adsorbed at the interface between the carbon steel and the acid solution. The study provides an insight on the corrosion mechanism and highlights the potential of olive oil extract as an eco-friendly alternative to traditional corrosion inhibitors.

| S-EPMC10564776 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data