Thermally Activated Composite with Two-Way and Multi-Shape Memory Effects.
Ontology highlight
ABSTRACT:
SUBMITTER: Basit A
PROVIDER: S-EPMC5452645 | biostudies-other | 2013 Sep
REPOSITORIES: biostudies-other
Similar Datasets
Project description:With the advantage of reversible shape-morphing between two different permanent shapes under external stimuli, the two-way shape-memory aerogel is expected to become a preferred aerogel for developing practical applications in actuators, sensors, robotics, and more. Herein, the first two-way shape-memory liquid crystal elastomer (LCE)-based aerogel is prepared by an orthogonal heat and light curing strategy coupled with an intermediate mechanical stretching step. The differential scanning calorimetry, temperature-varied wide-angle X-ray scattering, and polarizing optical microscope results indicate that the aerogel possesses a liquid crystal phase and the insider mesogens are well-oriented along the stretching direction. In addition to having superior compressibility and excellent shape stability, this LCE-based aerogel can perform a reversible shape deformation during the heating/cooling cycles with a shrinkage ratio of 37%. The work, that is disclosed here, realizes a truly two-way shape-memory behavior rather than the one-way shape deformation of traditional polymer aerogel materials, and may promote potential applications of this novel LCE-based aerogel material in control devices, soft actuators, and beyond.
| S-EPMC8596101 | biostudies-literature
Project description:Soft robotic bodies are susceptible to mechanical fatigue, punctures, electrical breakdown, and aging, which can result in the degradation of performance or unexpected failure. To overcome these challenges, a soft self-healing robot is created using a thermoplastic methyl thioglycolate-modified styrene-butadiene-styrene (MG-SBS) elastomer tube fabricated by melt-extrusion, to allow the robot to self-heal autonomously at room temperature. After repeated damage and being separated into several parts, the robot is able to heal its stiffness and elongation to break to enable almost complete recovery of robot performance after being allowed to heal at room temperature for 24 h. The self-healing capability of the robot is examined across the material scale to robot scale by detailed investigations of the healing process, healing efficiency, mechanical characterization of the robot, and assessment of dynamic performance before and after healing. The self-healing robot is driven by a new micro two-way shape-memory alloy (TWSMA) spring actuator which achieved a crawling speed of 21.6 cm/min, equivalent to 1.57 body length per minute. An analytical model of the robot is created to understand the robot dynamics and to act as an efficient tool for self-healing robot design and optimization. This work therefore provides a new methodology to create efficient, robust, and damage-tolerant soft robots.
| S-EPMC10787064 | biostudies-literature
Project description:Shape-memory composites have benefits for minimally invasive surgery, but their wider applications for bone repair are hindered by conflicts between the mechanical and memory performances, especially at load-bearing locations. In this study, we fabricated a graphene oxide shape-memory polyurethane composite through the chemical combination of graphene oxide and isocyanate, in order to realize satisfactory mechanical and shape-memory effects. As desired, a modulus of ~339 MPa and a shape recovery ratio of 98% were achieved, respectively, in the composite. In addition, finite element analysis demonstrated that, after being implanted in a defective bone through a minimally invasive treatment, where the highest stress was distributed at the implant-bone interface, this composite could offer a generated force during the recovery process. Furthermore, we also discuss the origins of the improved mechanical and memory properties of the composites, which arise from increased net-points and the stable molecular structure inside. Therefore, with its superior structure and properties, we envision that this shape-memory composite can provide new insights toward the practical application of shape-memory polymers and composites in the field of bone repair.
| S-EPMC7022938 | biostudies-literature
Project description:Shape-memory hydrogels (SMH) are multifunctional, actively-moving polymers of interest in biomedicine. In loosely crosslinked polymer networks, gelatin chains may form triple helices, which can act as temporary net points in SMH, depending on the presence of salts. Here, we show programming and initiation of the shape-memory effect of such networks based on a thermomechanical process compatible with the physiological environment. The SMH were synthesized by reaction of glycidylmethacrylated gelatin with oligo(ethylene glycol) (OEG) α,ω-dithiols of varying crosslinker length and amount. Triple helicalization of gelatin chains is shown directly by wide-angle X-ray scattering and indirectly via the mechanical behavior at different temperatures. The ability to form triple helices increased with the molar mass of the crosslinker. Hydrogels had storage moduli of 0.27-23 kPa and Young's moduli of 215-360 kPa at 4 °C. The hydrogels were hydrolytically degradable, with full degradation to water-soluble products within one week at 37 °C and pH = 7.4. A thermally-induced shape-memory effect is demonstrated in bending as well as in compression tests, in which shape recovery with excellent shape-recovery rates Rr close to 100% were observed. In the future, the material presented here could be applied, e.g., as self-anchoring devices mechanically resembling the extracellular matrix.
| S-EPMC8197998 | biostudies-literature
Project description:Polymeric shape-memory elastomers can recover to a permeant shape from any programmed deformation under external stimuli. They are mostly cross-linked polymeric materials and can be shaped by three-dimensional (3D) printing. However, 3D printed shape-memory polymers so far only exhibit elasticity above their transition temperature, which results in their programmed shape being inelastic or brittle at lower temperatures. To date, 3D printed shape-memory elastomers with elasticity both below and above their transition temperature remain an elusive goal, which limits the application of shape-memory materials as elastic materials at low temperatures. In this paper, we printed, for the first time, a custom-developed shape-memory elastomer based on polyethylene glycol using digital light processing, which possesses elasticity and stretchability in a wide temperature range, below and above the transition temperature. Young's modulus in these two states can vary significantly, with a difference of up to 2 orders of magnitude. This marked difference in Young's modulus imparts excellent shape-memory properties to the material. The difference in Young's modulus at different temperatures allows for the programming of the pneumatic actuators by heating and softening specific areas. Consequently, a single actuator can exhibit distinct movement modes based on the programming process it undergoes.
| S-EPMC10472330 | biostudies-literature
Project description:Stimuli-responsive materials with sophisticated yet controllable shape-changing behaviors are highly desirable for real-world device applications. Among various shape-changing materials, the elastic nature of shape memory polymers allows fixation of temporary shapes that can recover on demand, whereas polymers with exchangeable bonds can undergo permanent shape change via plasticity. We integrate the elasticity and plasticity into a single polymer network. Rational molecular design allows these two opposite behaviors to be realized at different temperature ranges without any overlap. By exploring the cumulative nature of the plasticity, we demonstrate easy manipulation of highly complex shapes that is otherwise extremely challenging. The dynamic shape-changing behavior paves a new way for fabricating geometrically complex multifunctional devices.
| S-EPMC4730863 | biostudies-literature
Project description:Triple-shape-memory polymers (triple-SMPs) are a class of polymers capable of fixing two temporary shapes and recovering sequentially from the first temporary shape to the second temporary shape and, last, to the permanent shape. To accomplish a sequential shape change, a triple-SMP must have two separate shape-fixing mechanisms triggerable by distinct stimuli. Despite the biomedical potential of triple-SMPs, a triple-SMP that with cells present can undergo two different shape changes via two distinct cytocompatible triggers has not previously been demonstrated. Here, we report the design and characterization of a cytocompatible triple-SMP material that responds separately to thermal and light triggers to undergo two distinct shape changes under cytocompatible conditions. Tandem triggering was achieved via a photothermally triggered component, comprising poly(ε-caprolactone) (PCL) fibers with graphene oxide (GO) particles physically attached, embedded in a thermally triggered component, comprising a tert-butyl acrylate-butyl acrylate (tBA-BA) matrix. The material was characterized in terms of thermal properties, surface morphology, shape-memory performance, and cytocompatibility during shape change. Collectively, the results demonstrate cytocompatible triple-shape behavior with a relatively larger thermal shape change (an average of 20.4 ± 4.2% strain recovered for all PCL-containing groups) followed by a smaller photothermal shape change (an average of 3.5 ± 0.8% strain recovered for all PCL-GO-containing groups; samples without GO showed no recovery) with greater than 95% cell viability on the triple-SMP materials, establishing the feasibility of triple-shape memory to be incorporated into biomedical devices and strategies.
| S-EPMC10636728 | biostudies-literature
Project description:In the past few decades, there has been continued interest in shape memory polymers (SMPs), and tremendous efforts have been made to develop multifunctional composites of these SMPs to enhance the existing properties of SMPs. Although fossil-based sources are widely used in the production of shape memory polymer composites (SMPCs), the depletion of fossil-based resources and associated environmental problems increase interest toward renewable biobased products synthesized from natural resources. This study aims to produce alkaline lignin-reinforced SMPCs by using alkaline lignin in the SMP matrix. Thermo-mechanical, morphological, and shape memory tests are performed in order to reveal the effect of alkaline lignin usage in the SMP matrix on SMPC production. Differential scanning calorimetry analysis results show that adding alkaline lignin into the SMP matrix with 1 and 3% ratios led to an increase in T g values, while raising the alkaline lignin ratio to 5% decreased the T g value. According to the DMA results, increasing the alkaline lignin ratios caused an increase in the storage modulus of SMPCs, and the best storage modulus value was obtained at the 5% alkaline lignin ratio. The results of the three-point bending test also confirmed the results obtained from the DMA analysis, showing that an increasing alkaline lignin ratio caused an increase in the bending modulus. Scanning electron microscopy analysis showed a rough structure in 1 and 3% alkaline lignin supplementation, while a smoother structure was observed in 5% alkaline lignin supplementation. The smoother structure of the sample containing 5% alkaline lignin indicates that alkaline lignin supplementation exhibits a smoother surface by showing a plasticizing effect. As a result, it was observed that increasing the lignin ratio increased the polymer/alkaline lignin interaction, resulting in a harder structure and an increase in the flexural modulus value.
| S-EPMC10157668 | biostudies-literature
Project description:Micro/nanophotonic structures that are capable of optical wave-front shaping are implemented in optical waveguides and passive optical devices to alter the phase of the light propagating through them. The beam division directions and beam power distribution depend on the design of the micro/nanostructures. The ultimate potential of advanced micro/nanophotonic structures is limited by their structurally rigid, functional singleness and not tunable against external impact. Here, we propose a thermally induced optical beam-power splitter concept based on a shape memory polystyrene film with programmable micropatterns. The smooth film exhibits excellent transparency with a transmittance of 95% in the visible spectrum and optical stability during a continuous heating process up to 90 °C. By patterning double sided shape memory polystyrene film into erasable and switchable micro-groove gratings, the transmission light switches from one designed light divided directions and beam-power distribution to another because of the optical diffraction effect of the shape changing micro gratings during the whole thermal activated recovery process. The experimental and theoretical results demonstrate a proof-of-principle of the beam-power splitter. Our results can be adapted to further extend the applications of micro/nanophotonic devices and implement new features in the nanophotonics.
| S-EPMC5343575 | biostudies-literature
Project description:This data article presents the utilization of thermally dynamic covalent bonds of lignin linkages such as ?-O-4', C?-O of ?-5' phenylcoumaran, and ?-? resinol to modify the thermomechanical properties of high loading lignin-nitrile rubber composites. These thermally active lignin linkages can be triggered at 180?°C to generate free-radicals for crosslinking reactions. The evolution of crosslinking density was measured in-situ using dynamic mechanical analysis and rheological characterization. The shape programmability and shape recovery of these composites were determined by both ex-situ and in-situ methods. The thermally modified composites exhibited excellent shape memory properties. The data in this article are related to our recent research article entitled "Responsive lignin for shape memory applications" (Nguyen et al., 2018).
| S-EPMC6307537 | biostudies-other