Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Antithrombogenicity of Fluorinated Diamond-Like Carbon Films Coated Nano Porous Polyethersulfone (PES) Membrane.

ABSTRACT: A nano porous polyethersulfone (PES) membrane is widely used for aspects of nanofiltration, such as purification, fractionation and dialysis. However, the low-blood-compatibility characteristic of PES membrane causes platelets and blood cells to stick to the surface of the membrane and degrades ions diffusion through membrane, which further limits its application for dialysis systems. In this study, we deposited the fluorinated-diamond-like-carbon (F-DLC) onto the finger like structure layer of the PES membrane. By doing this, we have the F-DLC films coating the membrane surface without sacrificing the membrane permeability. In addition, we examined antithrombogenicity of the F-DLC/PES membranes using a microfluidic device, and experimentally found that F-DLC drastically reduced the amount of blood cells attached to the surface. We have also conducted long-term experiments for 24 days and the diffusion characteristics were found to be deteriorated due to fouling without any surface modification. On the other hand, the membranes coated by F-DLC film gave a consistent diffusion coefficient of ions transfer through a membrane porous. Therefore, F-DLC films can be a great candidate to improve the antithrombogenic characteristics of the membrane surfaces in hemodialysis systems.

SUBMITTER: Prihandana GS

PROVIDER: S-EPMC5452837 | biostudies-other | 2013 Sep

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Ultra-resilient multi-layer fluorinated diamond like carbon hydrophobic surfaces.

Project description:Seventy percent of global electricity is generated by steam-cycle power plants. A hydrophobic condenser surface within these plants could boost overall cycle efficiency by 2%. In 2022, this enhancement equates to an additional electrical power generation of 1000 TWh annually, or 83% of the global solar electricity production. Furthermore, this efficiency increase reduces CO2 emissions by 460 million tons /year with a decreased use of 2 trillion gallons of cooling water per year. However, the main challenge with hydrophobic surfaces is their poor durability. Here, we show that solid microscale-thick fluorinated diamond-like carbon (F-DLC) possesses mechanical and thermal properties that ensure durability in moist, abrasive, and thermally harsh conditions. The F-DLC coating achieves this without relying on atmospheric interactions, infused lubricants, self-healing strategies, or sacrificial surface designs. Through tailored substrate adhesion and multilayer deposition, we develop a pinhole-free F-DLC coating with low surface energy and comparable Young's modulus to metals. In a three-year steam condensation experiment, the F-DLC coating maintains hydrophobicity, resulting in sustained and improved dropwise condensation on multiple metallic substrates. Our findings provide a promising solution to hydrophobic material fragility and can enhance the sustainability of renewable and non-renewable energy sources.

| S-EPMC10425355 | biostudies-literature

Transparent, flexible supercapacitors from nano-engineered carbon films.

Project description:Here we construct mechanically flexible and optically transparent thin film solid state supercapacitors by assembling nano-engineered carbon electrodes, prepared in porous templates, with morphology of interconnected arrays of complex shapes and porosity. The highly textured graphitic films act as electrode and current collector and integrated with solid polymer electrolyte, function as thin film supercapacitors. The nanostructured electrode morphology and the conformal electrolyte packaging provide enough energy and power density for the devices in addition to excellent mechanical flexibility and optical transparency, making it a unique design in various power delivery applications.

| S-EPMC3481118 | biostudies-literature

Facile Synthesis of Sponge-Like Porous Nano Carbon-Coated Silicon Anode with Tunable Pore Structure for High-Stability Lithium-Ion Batteries.

Project description:To address the challenge of the huge volume expansion of silicon anode, carbon-coated silicon has been developed as an effective design strategy due to the improved conductivity and stable electrochemical interface. However, although carbon-coated silicon anodes exhibit improved cycling stability, the complex synthesis methods and uncontrollable structure adjustment still make the carbon-coated silicon anodes hard to popularize in practical application. Herein, we propose a facile method to fabricate sponge-like porous nano carbon-coated silicon (sCCSi) with a tunable pore structure. Through the strategy of adding water into precursor solution combined with a slow heating rate of pre-oxidation, a sponge-like porous structure can be formed. Furthermore, the porous structure can be controlled through stirring temperature and oscillation methods. Owing to the inherent material properties and the sponge-like porous structure, sCCSi shows high conductivity, high specific surface area, and stable chemical bonding. As a result, the sCCSi with normal and excessive silicon-to-carbon ratios all exhibit excellent cycling stability, with 70.6% and 70.2% capacity retentions after 300 cycles at 500 mA g-1, respectively. Furthermore, the enhanced buffering effect on pressure between silicon nanoparticles and carbon material due to the sponge-like porous structure in sCCSi is further revealed through mechanical simulation. Considering the facile synthesis method, flexible regulation of porous structure, and high cycling stability, the design of the sCCSi paves a way for the synthesis of high-stability carbon-coated silicon anodes.

| S-EPMC8199406 | biostudies-literature

Composites containing resins and carbon nano-onions as efficient porous carbon materials for supercapacitors.

Project description:Herein, we report the functionalization of carbon nano-onions (CNOs) with the hydroxyaryl group and subsequent modifications with resins: resorcinol-formaldehyde using porogenic Pluronic F-127, resorcinol-formaldehyde-melamine, benzoxazine made of bisphenol A and triethylenetetramine, and calix[4]resorcinarene-derived using F-127. Following the direct carbonization, extensive physicochemical analysis was carried out, including Fourier transform infrared, Raman and X-ray photoelectron spectroscopy, scanning and transmission electron microscopy, and adsorption-desorption of N2. The addition of CNO to the materials significantly increases the total pore volume (up to 0.932 cm3 g-1 for carbonized resorcinol-formaldehyde resin and CNO (RF-CNO-C) and 1.242 cm3 g-1 for carbonized resorcinol-formaldehyde-melamine resin and CNO (RFM-CNO-C)), with mesopores dominating. However, the synthesized materials have poorly ordered domains with some structural disturbance; the RFM-CNO-C composite shows a more ordered structure with amorphous and semi-crystalline regions. Subsequently, cyclic voltammetry and galvanostatic charge-discharge method studied the electrochemical properties of all materials. The influence of resins' compositions, CNO content, and amount of N atoms in carbonaceous skeleton on the electrochemical performance was studied. In all cases, adding CNO to the material improves its electrochemical properties. The carbon material derived from CNO, resorcinol and melamine (RFM-CNO-C) showed the highest specific capacitance of 160 F g-1 at a current density of 2 A g-1, which is stable after 3000 cycles. The RFM-CNO-C electrode retains approximately 97% of its initial capacitive efficiency. The electrochemical performance of the RFM-CNO-C electrode results from the hierarchical porosity's stability and the presence of nitrogen atoms in the skeleton. This material is an optimal solution for supercapacitor devices.

| S-EPMC10126139 | biostudies-literature

Magnesium isotopes of the bulk solar wind from Genesis diamond-like carbon films.

Project description:NASA's Genesis Mission returned solar wind (SW) to the Earth for analysis to derive the composition of the solar photosphere from solar material. SW analyses control the precision of the derived solar compositions, but their ultimate accuracy is limited by the theoretical or empirical models of fractionation due to SW formation. Mg isotopes are "ground truth" for these models since, except for CAIs, planetary materials have a uniform Mg isotopic composition (within ≤1‰) so any significant isotopic fractionation of SW Mg is primarily that of SW formation and subsequent acceleration through the corona. This study analyzed Mg isotopes in a bulk SW diamond-like carbon (DLC) film on silicon collector returned by the Genesis Mission. A novel data reduction technique was required to account for variable ion yield and instrumental mass fractionation (IMF) in the DLC. The resulting SW Mg fractionation relative to the DSM-3 laboratory standard was (-14.4‰, -30.2‰) ± (4.1‰, 5.5‰), where the uncertainty is 2ơ SE of the data combined with a 2.5‰ (total) error in the IMF determination. Two of the SW fractionation models considered generally agreed with our data. Their possible ramifications are discussed for O isotopes based on the CAI nebular composition of McKeegan et al. (2011).

| S-EPMC7079557 | biostudies-literature

Corrosion Behavior and Biocompatibility of Diamond-like Carbon-Coated Zinc: An In Vitro Study.

Project description:Owing to the desirable degradation rate and good biocompatibility, zinc (Zn) and Zn alloys are promising biodegradable implant metals in orthopedic and cardiovascular applications. Surface modification, such as deposition of coatings, is frequently implemented to further enhance their biological properties. In this study, diamond-like carbon (DLC) films are deposited on Zn by magnetron sputtering. The DLC films do not change the surface morphology of Zn but alter the hydrophobic properties with a contact angle of approximately 90°. Electrochemical and in vitro immersion tests reveal that the corrosion resistances of the DLC-coated Zn decrease unexpectedly, which is possibly due to galvanic corrosion between the DLC film and Zn substrate. Furthermore, the uncoated and coated Zn samples show hemolysis ratios less than 1%. The cells cultured in the Zn extract exhibit higher viability than those cultured in the extract of the DLC-coated Zn, suggesting that the DLC films decrease the cytocompatibility of Zn. The lower corrosion resistance has little influence on the hemolysis ratio, suggesting that hemolysis is not an obstacle for the design of Zn-based biomaterials. Our results show that the traditional concept of protection with DLC films may not be applicable universally and decreased corrosion resistance and cytocompatibility are actually observed in DLC-coated Zn.

| S-EPMC8047653 | biostudies-literature

Nanocomposite Films of Chitosan-Grafted Carbon Nano-Onions for Biomedical Applications.

Project description:The design of scaffolding from biocompatible and resistant materials such as carbon nanomaterials and biopolymers has become very important, given the high rate of injured patients. Graphene and carbon nanotubes, for example, have been used to improve the physical, mechanical, and biological properties of different materials and devices. In this work, we report the grafting of carbon nano-onions with chitosan (CS-g-CNO) through an amide-type bond. These compounds were blended with chitosan and polyvinyl alcohol composites to produce films for subdermal implantation in Wistar rats. Films with physical mixture between chitosan, polyvinyl alcohol, and carbon nano-onions were also prepared for comparison purposes. Film characterization was performed with Fourier Transformation Infrared Spectroscopy (FTIR), Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), Tensile strength, X-ray Diffraction Spectroscopy (XRD), and Scanning Electron Microscopy (SEM). The degradation of films into simulated body fluid (SBF) showed losses between 14% and 16% of the initial weight after 25 days of treatment. Still, a faster degradation (weight loss and pH changes) was obtained with composites of CS-g-CNO due to a higher SBF interaction by hydrogen bonding. On the other hand, in vivo evaluation of nanocomposites during 30 days in Wistar rats, subdermal tissue demonstrated normal resorption of the materials with lower inflammation processes as compared with the physical blends of ox-CNO formulations. SBF hydrolytic results agreed with the in vivo degradation for all samples, demonstrating that with a higher ox-CNO content increased the stability of the material and decreased its degradation capacity; however, we observed greater reabsorption with the formulations including CS-g-CNO. With this research, we demonstrated the future impact of CS/PVA/CS-g-CNO nanocomposite films for biomedical applications.

| S-EPMC7179466 | biostudies-literature

Nitrogen-incorporated ultrananocrystalline diamond and multi-layer-graphene-like hybrid carbon films.

Project description:Nitrogen-incorporated ultrananocrystalline diamond (N-UNCD) and multi-layer-graphene-like hybrid carbon films have been synthesized by microwave plasma enhanced chemical vapor deposition (MPECVD) on oxidized silicon which is pre-seeded with diamond nanoparticles. MPECVD of N-UNCD on nanodiamond seeds produces a base layer, from which carbon structures nucleate and grow perpendicularly to form standing carbon platelets. High-resolution transmission electron microscopy and Raman scattering measurements reveal that these carbon platelets are comprised of ultrananocrystalline diamond embedded in multilayer-graphene-like carbon structures. The hybrid carbon films are of low electrical resistivity. UNCD grains in the N-UNCD base layer and the hybrid carbon platelets serve as high-density diamond nuclei for the deposition of an electrically insulating UNCD film on it. Biocompatible carbon-based heaters made of low-resistivity hybrid carbon heaters encapsulated by insulating UNCD for possible electrosurgical applications have been demonstrated.

| S-EPMC3970192 | biostudies-other

Friction Durability of Extremely Thin Diamond-Like Carbon Films at High Temperature.

Project description:To clarify the friction durability, both during and after the high-temperature heating of nanometer-thick diamond-like carbon (DLC) films, deposited using filtered cathodic vacuum arc (FCVA) and plasma chemical vapor deposition (P-CVD) methods, the dependence of the friction coefficient on the load and sliding cycles of the DLC films, were evaluated. Cluster-I consisted of a low friction area in which the DLC film was effective, while cluster-II consisted of a high friction area in which the lubricating effect of the DLC film was lost. The friction durability of the films was evaluated by statistical cluster analysis. Extremely thin FCVA-DLC films exhibited an excellent wear resistance at room temperature, but their friction durability was decreased at high temperatures. In contrast, the durability of the P-CVD-DLC films was increased at high temperatures when compared with that observed at room temperature. This inverse dependence on temperature corresponded to the nano-friction results obtained by atomic force microscopy. The decrease in the friction durability of the FCVA-DLC films at high temperatures, was caused by a complex effect of temperature and friction. The tribochemical reaction produced by the P-CVD-DLC films reduced their friction coefficient, increasing their durability at high temperatures.

| S-EPMC5459206 | biostudies-other

Nano- to microscale three-dimensional morphology relevant to transport properties in reactive porous composite paint films.

Project description:The quantitative evaluation of the three-dimensional (3D) morphology of porous composite materials is important for understanding mass transport phenomena, which further impact their functionalities and durability. Reactive porous paint materials are composites in nature and widely used in arts and technological applications. In artistic oil paintings, ambient moisture and water and organic solvents used in conservation treatments are known to trigger multiple physical and chemical degradation processes; however, there is no complete physical model that can quantitatively describe their transport in the paint films. In the present study, model oil paints with lead white (2PbCO3·Pb(OH)2) and zinc white (ZnO) pigments, which are frequently found in artistic oil paintings and are associated with the widespread heavy metal soap deterioration, were studied using synchrotron X-ray nano-tomography and unilateral nuclear magnetic resonance. This study aims to establish a relationship among the paints' compositions, the 3D morphological properties and degradation. This connection is crucial for establishing reliable models that can predict transport properties of solvents used in conservation treatments and of species involved in deterioration reactions, such as soap formation.

| S-EPMC7591493 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data