Thermo-Plasmonics for Localized Graphitization and Welding of Polymeric Nanofibers.
Ontology highlight
ABSTRACT:
SUBMITTER: Zillohu AU
PROVIDER: S-EPMC5453131 | biostudies-other | 2014 Jan
REPOSITORIES: biostudies-other
Similar Datasets
Project description:A real-time tool to monitor the electrospinning process is fundamental to improve the reproducibility and quality of the resulting nanofibers. Hereby, a novel optical system integrated through coaxial needle is proposed as monitoring tool for electrospinning process. An optical fiber (OF) is inserted in the inner needle, while the external needle is used to feed the polymeric solution (PEO/water) drawn by the process. The light exiting the OF passes through the solution drop at the needle tip and gets coupled to the electrospun fiber (EF) while travelling towards the nanofibers collector. Numerical and analytical models were developed to assess the feasibility and robustness of the light coupling. Experimental tests demonstrated the influence of the process parameters on the EF waveguide properties, in terms of waveguide length (L), and on the nanofibers diameter distribution, in terms of mean [Formula: see text] and normalized standard deviation [Formula: see text]. Data analysis reveals good correlation between L and [Formula: see text] (respectively maximum correlation coefficients of [Formula: see text] = 0.88 and [Formula: see text] = 0.84), demonstrating the potential for effectively using the proposed light-assisted technology as real-time visual feedback on the process. The developed system can provide an interesting option for monitoring industrial electrospinning systems using multi- or moving needles with impact in the scaling-up of innovative nanofibers for soft systems.
| S-EPMC7529797 | biostudies-literature
Project description:We demonstrate that laser peening coupled with sintering of CdTe nanowire films substantially enhances film quality and charge transfer while largely maintaining basic particle morphology. During the laser peening phase, a shockwave is used to compress the film. Laser sintering comprises the second step, where a nanosecond pulse laser beam welds the nanowires. Microstructure, morphology, material content, and electrical conductivities of the films are characterized before and after treatment. The morphology results show that laser peening can decrease porosity and bring nanowires into contact, and pulsed laser heating fuses those contacts. Multiphysics simulations coupling electromagnetic and heat transfer modules demonstrate that during pulsed laser heating, local EM field enhancement is generated specifically around the contact areas between two semiconductor nanowires, indicating localized heating. The characterization results indicate that solely laser peening or sintering can only moderately improve the thin film quality; however, when coupled together as laser peen sintering (LPS), the electrical conductivity enhancement is dramatic. LPS can decrease resistivity up to a factor of ~10,000, resulting in values on the order of ~10(5)??-cm in some cases, which is comparable to CdTe thin films. Our work demonstrates that LPS is an effective processing method to obtain high-quality semiconductor nanocrystal films.
| S-EPMC4630610 | biostudies-literature
Project description:Cochlear hair cells are critical for the conversion of acoustic into electrical signals and their dysfunction is a primary cause of acquired hearing impairments, which worsen with aging. Piezoelectric materials can reproduce the acoustic-electrical transduction properties of the cochlea and represent promising candidates for future cochlear prostheses. The majority of piezoelectric hearing devices so far developed are based on thin films, which have not managed to simultaneously provide the desired flexibility, high sensitivity, wide frequency selectivity, and biocompatibility. To overcome these issues, we hypothesized that fibrous membranes made up of polymeric piezoelectric biocompatible nanofibers could be employed to mimic the function of the basilar membrane, by selectively vibrating in response to different frequencies of sound and transmitting the resulting electrical impulses to the vestibulocochlear nerve. In this study, poly(vinylidene fluoride-trifluoroethylene) piezoelectric nanofiber-based acoustic circular sensors were designed and fabricated using the electrospinning technique. The performance of the sensors was investigated with particular focus on the identification of the resonance frequencies and acoustic-electrical conversion in fibrous membrane with different size and fiber orientation. The voltage output (1-17 mV) varied in the range of low resonance frequency (100-400 Hz) depending on the diameter of the macroscale sensors and alignment of the fibers. The devices developed can be regarded as a proof-of-concept demonstrating the possibility of using piezoelectric fibers to convert acoustic waves into electrical signals, through possible synergistic effects of piezoelectricity and triboelectricity. The study has paved the way for the development of self-powered nanofibrous implantable auditory sensors.
| S-EPMC7460092 | biostudies-literature
Project description:Three-dimensional (3D) microfibrillar network represents an important structural design for various natural tissues and synthetic aerogels. Despite extensive efforts, achieving high mechanical properties for synthetic 3D microfibrillar networks remains challenging. Here, we report ultrastrong polymeric aerogels involving self-assembled 3D networks of aramid nanofiber composites. The interactions between the nanoscale constituents lead to assembled networks with high nodal connectivity and strong crosslinking between fibrils. As revealed by theoretical simulations of 3D networks, these features at fibrillar joints may lead to an enhancement of macroscopic mechanical properties by orders of magnitude even with a constant level of solid content. Indeed, the polymeric aerogels achieved both high specific tensile modulus of ~625.3 MPa cm3 g-1 and fracture energy of ~4700 J m-2, which are advantageous for diverse structural applications. Furthermore, their simple processing techniques allow fabrication into various functional devices, such as wearable electronics, thermal stealth, and filtration membranes. The mechanistic insights and manufacturability provided by these robust microfibrillar aerogels may create further opportunities for materials design and technological innovation.
| S-EPMC9307841 | biostudies-literature
Project description:We report a simple method for the photothermal welding of nonwoven mats of electrospun nanofibers by introducing a near-infrared (NIR) dye such as indocyanine green. By leveraging the strong photothermal effect of the dye, the nanofibers can be readily welded at their cross points or even over-welded (i.e., melted and/or fused together) to transform the porous mat into a solid film upon exposure to a NIR laser. While welding at the cross points greatly improves the mechanical strength of a nonwoven mat of nanofibers, melting and fusion of the nanofibers can be employed to fabricate a novel class of photothermal papers for laser writing or printing without chemicals or toner particles. By using a photomask, we can integrate photothermal welding with the gas foaming technique to pattern and then expand nonwoven mats into 3D scaffolds with well-defined structures. This method can be applied to different combinations of polymers and dyes, if they can be co-dissolved in a suitable solvent for electrospinning.
| S-EPMC6829033 | biostudies-literature
Project description:In this work, polyacrylonitrile/aminated polymeric nanosphere (PAN/APN) nanofibers were prepared by electrospinning of monodispersed aminated polymeric nanospheres (APNs) for removal of Cr(VI) from aqueous solution. Characterization results showed that obtained PAN/APNs possessed nitrogen functionalization. Furthermore, the adsorption application results indicated that PAN/APN nanofibers exhibited a high adsorption capacity of 556 mg/g at 298 K for Cr(VI) removal. The kinetic data showed that the adsorption process fits the pseudo-second order. A thermodynamic study revealed that the adsorption of Cr(VI) was spontaneous and endothermic. The coexisting ions Na+, Ca2+, K+, Cl-, NO3- and PO43- had little influence on Cr(VI) adsorption, while SO42- in solution dramatically decreased the removal performance. In the investigation of the removal mechanism, relative results indicated that the adsorption behavior possibly involved electrostatic adsorption, redox reaction and chelation. PAN/APN nanofibers can detoxify Cr(VI) to Cr(III) and subsequently chelate Cr(III) on its surface. The unique structure and nitrogen functionalization of PAN/APN nanofibers make them novel and prospective candidates in heavy metal removal.
| S-EPMC9611933 | biostudies-literature
Project description:This study presents the preparation and the thermo-mechanical characteristics of polymeric blends based on di(meth)acrylates monomers. Bisphenol A glycerolate diacrylate (BPA.GDA) or ethylene glycol dimethacrylate (EGDMA) were used as crosslinking monomers. Methyl methacrylate (MMA) was used as an active solvent in both copolymerization approaches. Commercial polycarbonate (PC) was used as a modifying soluble additive. The preparation of blends and method of polymerization by using UV initiator (Irqacure® 651) was proposed. Two parallel sets of MMA-based materials were obtained. The first included more harmless linear hydrocarbons (EGDMA + MMA), whereas the second included the usually used aromatic copolymers (BPA.GDA + MMA). The influence of different amounts of PC on the physicochemical properties was discussed in detail. Chemical structures of the copolymers were confirmed by attenuated total reflection-Fourier transform infrared (ATR/FT-IR) spectroscopy. Thermo-mechanical properties of the synthesized materials were investigated by means of differential scanning calorimetry (DSC), thermogravimetric (TG/DTG) analyses, and dynamic mechanical analysis (DMA). The hardness of the obtained materials was also tested. In order to evaluate the surface of the materials, their images were obtained with the use of atomic force microscopy (AFM).
| S-EPMC7999132 | biostudies-literature
Project description:In this study, varying concentrations of linear pNIPAAM have been incorporated for the first time into a thermo-responsive polymeric ionic liquid (PIL) hydrogel, namely tributyl-hexyl phosphonium 3-sulfopropylacrylate (P-SPA), to produce semi-interpenetrating polymer networks. The thermal properties of the resulting hydrogels have been investigated along with their thermo-induced shrinking and reswelling capabilities. The semi-interpenetrating networks (IPN) hydrogels were found to have improved shrinking and reswelling properties compared with their PIL counterpart. At elevated temperatures (50-80 °C), it was found that the semi-IPN with the highest concentration of hydrophobic pNIPAAM exhibited the highest shrinking percentage of ~40% compared to the conventional P-SPA, (27%). This trend was also found to occur for the reswelling measurements, with semi-IPN hydrogels producing the highest reswelling percentage of ~67%, with respect to its contracted state. This was attributed to an increase in water affinity due to the presence of hydrophilic pNIPAAM. Moreover, the presence of linear pNIPAAM in the polymer matrix leads to improved shrinking and reswelling response compared to the equivalent PIL.
| S-EPMC4013567 | biostudies-literature
Project description:This paper presents a study conducted on the thermo-mechanical properties of knitted structures, the methods of manufacture, effect of contact pressure at the structural binding points, on the degree of heating. The test results also present the level of heating produced as a function of the separation between the supply terminals. The study further investigates the rate of heating and cooling of the knitted structures. The work also presents the decay of heating properties of the yarn due to overheating. Thermal images were taken to study the heat distribution over the surface of the knitted fabric. A tensile tester having constant rate of extension was used to stretch the fabric. The behavior of temperature profile of stretched fabric was observed. A comparison of heat generation by plain, rib and interlock structures was studied. It was observed from the series of experiments that there is a minimum threshold force of contact at binding points of a knitted structure is required to pass the electricity. Once this force is achieved, stretching the fabric does not affect the amount of heat produced.
| S-EPMC5512965 | biostudies-other
Project description:The urgent needs for photoactive materials in industry drive fast evolution of synthetic procedures in many branches of chemistry, including the chemistry of silsesquioxanes. Here, we disclose an effective protocol for the synthesis of novel double-decker silsesquioxanes decorated with two (styrylethynylphenyl)terpyridine moieties (DDSQ_Ta-b). The synthesis strategy involves a series of silylative and Sonogashira coupling reactions and is reported for the first time. DDSQ_Ta-b were employed as nanocage ligands to promote self-assembly in the presence of transition metals (TM), i.e., Zn2+, Fe2+, and Eu3+ ions, to form one-dimensional (1D) coordination polymeric nanofibers. Additionally, ultraviolet-promoted and reversible E-Z isomerization of the C═C bond within the ligand structures may be exploited to tune their emission properties. These findings render such complexes promising candidates for applications in materials chemistry. This is the first example of 1D coordination polymers bearing DDSQ-based nodes with TM ions.
| S-EPMC8289186 | biostudies-literature