Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Investigation of the Process Conditions for Hydrogen Production by Steam Reforming of Glycerol over Ni/Al₂O₃ Catalyst Using Response Surface Methodology (RSM).

ABSTRACT: In this work; a response surface methodology (RSM) was implemented to investigate the process variables in a hydrogen production system. The effects of five independent variables; namely the temperature (X₁); the flow rate (X₂); the catalyst weight (X₃); the catalyst loading (X₄) and the glycerol-water molar ratio (X₅) on the H₂ yield (Y₁) and the conversion of glycerol to gaseous products (Y₂) were explored. Using multiple regression analysis; the experimental results of the H₂ yield and the glycerol conversion to gases were fit to quadratic polynomial models. The proposed mathematical models have correlated the dependent factors well within the limits that were being examined. The best values of the process variables were a temperature of approximately 600 °C; a feed flow rate of 0.05 mL/min; a catalyst weight of 0.2 g; a catalyst loading of 20% and a glycerol-water molar ratio of approximately 12; where the H₂ yield was predicted to be 57.6% and the conversion of glycerol was predicted to be 75%. To validate the proposed models; statistical analysis using a two-sample t-test was performed; and the results showed that the models could predict the responses satisfactorily within the limits of the variables that were studied.

SUBMITTER: Ebshish A

PROVIDER: S-EPMC5453264 | biostudies-other | 2014 Mar

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

The Effect of Ni Addition onto a Cu-Based Ternary Support on the H? Production over Glycerol Steam Reforming Reaction.

Project description:In the present study, Ni/Ce-Sm-xCu (x = 5, 7, 10 at.%) catalysts were prepared using microwave radiation coupled with sol-gel and followed by wetness impregnation method for the Ni incorporation. Highly dispersed nanocrystallites of CuO and NiO on the Ce-Sm-Cu support were found. Increase of Cu content seems to facilitate the reducibility of the catalyst according to the H? temperature-programmed reduction (H?-TPR). All the catalysts had a variety of weak, medium and strong acid/basic sites that regulate the reaction products. All the catalysts had very high XC3H8O3 for the entire temperature (400?750 °C) range; from ?84% at 400 °C to ?94% at 750 °C. Ni/Ce-Sm-10Cu catalyst showed the lowest XC3H8O3-gas implying the Cu content has a detrimental effect on performance, especially between 450?650 °C. In terms of H? selectivity (SH2) and H? yield (YH2), both appeared to vary in the following order: Ni/Ce-Sm-10Cu > Ni/Ce-Sm-7Cu > Ni/Ce-Sm-5Cu, demonstrating the high impact of Cu content. Following stability tests, all the catalysts accumulated high amounts of carbon, following the order Ni/Ce-Sm-5Cu < Ni/Ce-Sm-7Cu < Ni/Ce-Sm-10Cu (52, 65 and 79 wt.%, respectively) based on the thermogravimetric analysis (TGA) studies. Raman studies showed that the incorporation of Cu in the support matrix controls the extent of carbon graphitization deposited during the reaction at hand.

| S-EPMC6266861 | biostudies-other

Role of Fe Species of Ni-Based Catalysts for Efficient Low-Temperature Ethanol Steam Reforming.

Project description:The suppression of methane and coke formation over Ni-based catalysts for low temperature ethanol steam reforming remains challenging. This paper describes the structural evolution of Fe-modified Ni/MgAl2O4 catalysts and the influence of iron species on methane and coke suppression for low temperature ethanol steam reforming. Ni-Fe alloy catalysts are gradually oxidized by water to generate Ni-rich alloy and γ-Fe2O3 species at steam-to-carbon ratio of 4. The electron transfer from iron to nickel within Ni-Fe alloy weakens the CO adsorption and effectively alleviates the CO/CO2 methanation. The oxidation capacity of γ-Fe2O3 species promotes the transformation of ethoxy to acetate groups to avoid methane formation and the elimination of carbon deposits for anticoking. Ni10Fe10/MgAl2O4 shows a superior performance with a highest H2 yield of 4.6 mol/mol ethanol at 400 °C for 15 h. This research could potentially provide instructions for the design of Ni-based catalysts for low-temperature ethanol steam reforming.

| S-EPMC8479767 | biostudies-literature

Reaction Pathway for Coke-Free Methane Steam Reforming on a Ni/CeO2 Catalyst: Active Sites and the Role of Metal-Support Interactions.

Project description:Methane steam reforming (MSR) plays a key role in the production of syngas and hydrogen from natural gas. The increasing interest in the use of hydrogen for fuel cell applications demands development of catalysts with high activity at reduced operating temperatures. Ni-based catalysts are promising systems because of their high activity and low cost, but coke formation generally poses a severe problem. Studies of ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) indicate that CH4/H2O gas mixtures react with Ni/CeO2(111) surfaces to form OH, CH x , and CH x O at 300 K. All of these species are easy to form and desorb at temperatures below 700 K when the rate of the MSR process is accelerated. Density functional theory (DFT) modeling of the reaction over ceria-supported small Ni nanoparticles predicts relatively low activation barriers between 0.3 and 0.7 eV for complete dehydrogenation of methane to carbon and the barrierless activation of water at interfacial Ni sites. Hydroxyls resulting from water activation allow for CO formation via a COH intermediate with a barrier of about 0.9 eV, which is much lower than that through a pathway involving lattice oxygen from ceria. Neither methane nor water activation is a rate-determining step, and the OH-assisted CO formation through the COH intermediate constitutes a low-barrier pathway that prevents carbon accumulation. The interactions between Ni and the ceria support and the low metal loading are crucial for the reaction to proceed in a coke-free and efficient way. These results pave the way for further advances in the design of stable and highly active Ni-based catalysts for hydrogen production.

| S-EPMC8294006 | biostudies-literature

Microemulsion Derived Titania Nanospheres: An Improved Pt Supported Catalyst for Glycerol Aqueous Phase Reforming.

Project description:Glycerol aqueous phase reforming (APR) produces hydrogen and interesting compounds at relatively mild temperatures. Among APR catalysts investigated in literature, little attention has been given to Pt supported on TiO2. Therefore, herein we propose an innovative titania support which can be obtained through an optimized microemulsion technique. This procedure provided high surface area titania nanospheres, with a peculiar high density of weak acidic sites. The material was tested in the catalytic glycerol APR after Pt deposition. A mechanism hypothesis was drawn, which evidenced the pathways giving the main products. When compared with a commercial TiO2 support, the synthetized titania provided higher hydrogen selectivity and glycerol conversion thanks to improved catalytic activity and ability to prompt consecutive dehydrogenation reactions. This was correlated to an enhanced cooperation between Pt nanoparticles and the acid sites of the support.

| S-EPMC8144991 | biostudies-literature

Study of the Metal-Support Interaction and Electronic Effect Induced by Calcination Temperature Regulation and Their Effect on the Catalytic Performance of Glycerol Steam Reforming for Hydrogen Production.

Project description:Steam reforming of glycerol to produce hydrogen is considered to be the very promising strategy to generate clean and renewable energy. The incipient-wetness impregnation method was used to load Ni on the reducible carrier TiO2 (P25). In the process of catalyst preparation, the interaction and electronic effect between metal Ni and support TiO2 were adjusted by changing the calcination temperature, and then the activity and hydrogen production of glycerol steam reforming reaction (GSR) was explored. A series of modern characterizations including XRD, UV-vis DRS, BET, XPS, NH3-TPD, H2-TPR, TG, and Raman have been applied to systematically characterize the catalysts. The characterization results showed that the calcination temperature can contribute to varying degrees of influences on the acidity and basicity of the Ni/TiO2 catalyst, the specific surface area, together with the interaction force between Ni and the support. When the Ni/TiO2 catalyst was calcined at 600 °C, the Ni species can be produced in the form of granular NiTiO3 spinel. Consequently, due to the moderate metal-support interaction and electronic activity formed between the Ni species and the reducible support TiO2 in the NiO/Ti-600C catalyst, the granular NiTiO3 spinel can be reduced to a smaller Ni0 at a lower temperature, and thus to exhibit the best catalytic performance.

| S-EPMC8620743 | biostudies-literature

Hydrogen Production by Steam Reforming of Ethanol over Nickel Catalysts Supported on Sol Gel Made Alumina: Influence of Calcination Temperature on Supports.

Project description:Selecting a proper support in the catalyst system plays an important role in hydrogen production via ethanol steam reforming. In this study, sol gel made alumina supports prepared for nickel (Ni) catalysts were calcined at different temperatures. A series of (Ni/AlS.G.) catalysts were synthesized by an impregnation procedure. The influence of varying the calcination temperature of the sol gel made supports on catalyst activity was tested in ethanol reforming reaction. The characteristics of the sol gel alumina supports and Ni catalysts were affected by the calcination temperature of the supports. The structure of the sol gel made alumina supports was transformed in the order of γ → (γ + θ) → θ-alumina as the calcination temperature of the supports increased from 600 °C to 1000 °C. Both hydrogen yield and ethanol conversion presented a volcano-shaped behavior with maximum values of 4.3 mol/mol ethanol fed and 99.5%, respectively. The optimum values were exhibited over Ni/AlS.G800 (Ni catalyst supported on sol gel made alumina calcined at 800 °C). The high performance of the Ni/AlS.G800 catalyst may be attributed to the strong interaction of Ni species and sol gel made alumina which lead to high nickel dispersion and small particle size.

| S-EPMC5458952 | biostudies-other

Coking-resistant dry reforming of methane over Ni/γ-Al2O3 catalysts by rationally steering metal-support interaction.

Project description:The coking issue is the main challenge for dry reforming of methane (DRM) over Ni-based catalysts. Herein, we excavate the reasons for the enhanced coking resistance of the bounded Ni over the free state Ni in Ni/γ-Al2O3 catalysts for DRM. Rational metal-support interaction of the bounded Ni would facilitate desorption of CO, thus suppressing CO disproportionation and decreasing carbon deposition. The higher activity of the bounded Ni is ascribed to better methane cracking ability, stronger adsorption, and activation of CO2 by forming polydentate carbonate. The better activation of CO2 over the bounded Ni would also contribute to the gasification of formed coke. We gain an insight into the anti-coking mechanism of DRM determined by metal-support interaction in Ni/γ-Al2O3 catalysts through mechanistic studies. It is believed that our findings would enlighten the design of more efficient catalysts for DRM.

| S-EPMC8261659 | biostudies-literature

Decomposition of Cyclohexane on Ni₃Al Thin Foil Intermetallic Catalyst.

Project description:Micro-grained thin foils made of Ni₃Al intermetallic alloy were fabricated, according to a previously described procedure, and tested as catalyst for decomposition of cyclohexane. The conversion efficiency of the catalyst was evaluated in a synthetic air atmosphere, and found to be as high as 98.7% ± 1.0% at 600 °C and 86.7% ± 3.6% at 500 °C. During the reaction, the growth of carbon nanofibers on the catalysts surface was observed. The chemical and phase composition of the nanofibers was investigated with scanning electron microscopy (SEM), energy dispersive spectrometry (EDS) and X-ray diffraction (XRD), finding them to be made of graphitic carbon. Additionally, nanoparticles of nickel appear to be incorporated in the fibers. The obtained material is promising for large scale fabrication in industrial applications because of its high efficiency in the hydrocarbon decomposition, the simple fabrication procedure, and the form of self-supporting foils with the presence of additional carbon nanofibers that increase its efficiency.

| S-EPMC5456010 | biostudies-other

Kinetic Characterization of Tar Reforming on Commercial Ni-Catalyst Pellets Used for In Situ Syngas Cleaning in Biomass Gasification: Experiments and Simulations under Process Conditions.

Project description:Filtering-catalytic candles, filled with an annular packed-bed of commercial Ni-catalyst pellets (∼600 g), were successfully tested for in situ syngas cleaning in a fluidized-bed biomass steam gasifier [Fuel Process. Technol.2019, 191, 44-53, DOI: 10.1016/j.fuproc.2019.03.018]. Those tests enabled the macroscopic evaluation of gasification and gas cleaning as a whole, requiring a more specific assessment of the catalyst performance inside the filter candle. To this end, steam reforming tests of tar key compounds (naphthalene and toluene; thiophene in traces to observe sulfur deactivation) were performed with a laboratory-scale packed-bed reactor containing the same catalyst pellets (<7 g). A lumped kinetics was derived, referred to a pseudocomponent representing tars. This was then validated by simulation of the annular catalytic packed bed inside the filter candle, obtaining numerical results in fair agreement with gasifier outputs. As a result, the lab-scale investigation with a small amount of catalyst provides reliable predictions of tar catalytic reforming in industrial-scale filtering-catalytic candles.

| S-EPMC8154441 | biostudies-literature

Propane Steam Reforming over Catalysts Derived from Noble Metal (Ru, Rh)-Substituted LaNiO3 and La0.8Sr0.2NiO3 Perovskite Precursors.

Project description:The propane steam reforming (PSR) reaction was investigated over catalysts derived from LaNiO3 (LN), La0.8Sr0.2NiO3 (LSN), and noble metal-substituted LNMx and LSNMx (M = Ru, Rh; x = 0.01, 0.1) perovskites. The incorporation of foreign cations in the A and/or B sites of the perovskite structure resulted in an increase in the specific surface area, a shift of XRD lines toward lower diffraction angles, and a decrease of the mean primary crystallite size of the parent material. Exposure of the as-prepared samples to reaction conditions resulted in the in situ development of new phases including metallic Ni and La2O2CO3, which participate actively in the PSR reaction. The LN-derived catalyst exhibited higher activity compared to LSN, and its performance for the title reaction did not change appreciably following partial substitution of Ru for Ni. In contrast, incorporation of Ru and, especially, Rh in the LSN perovskite matrix resulted in the development of catalysts with significantly enhanced catalytic performance, which improved by increasing the noble metal content. The best results were obtained for the LSNRh0.1-derived sample, which exhibited excellent long-term stability for 40 hours on stream as well as high propane conversion (XC3H8 = 92%) and H2 selectivity (SH2 = 97%) at 600 °C.

| S-EPMC8401020 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data