Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Base Catalytic Approach: A Promising Technique for the Activation of Biochar for Equilibrium Sorption Studies of Copper, Cu(II) Ions in Single Solute System.

ABSTRACT: This study examines the feasibility of catalytically pretreated biochar derived from the dried exocarp or fruit peel of mangostene with Group I alkali metal hydroxide (KOH). The pretreated char was activated in the presence of carbon dioxide gas flow at high temperature to upgrade its physiochemical properties for the removal of copper, Cu(II) cations in single solute system. The effect of three independent variables, including temperature, agitation time and concentration, on sorption performance were carried out. Reaction kinetics parameters were determined by using linear regression analysis of the pseudo first, pseudo second, Elovich and intra-particle diffusion models. The regression co-efficient, R² values were best for the pseudo second order kinetic model for all the concentration ranges under investigation. This implied that Cu(II) cations were adsorbed mainly by chemical interactions with the surface active sites of the activated biochar. Langmuir, Freundlich and Temkin isotherm models were used to interpret the equilibrium data at different temperature. Thermodynamic studies revealed that the sorption process was spontaneous and endothermic. The surface area of the activated sample was 367.10 m²/g, whereas before base activation, it was only 1.22 m²/g. The results elucidated that the base pretreatment was efficient enough to yield porous carbon with an enlarged surface area, which can successfully eliminate Cu(II) cations from waste water.

SUBMITTER: Hamid SBA

PROVIDER: S-EPMC5453359 | biostudies-other | 2014 Apr

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Predicting Cu and Zn sorption capacity of biochar from feedstock C/N ratio and pyrolysis temperature.

Project description:Biochars have been proposed for remediation of metal-contaminated water due to their low cost, high surface area and high sorption capacity for metals. However, there is a lack of understanding over how feedstock material and pyrolysis conditions contribute to the metal sorption capacity of biochar. We produced biochars from 10 different organic materials by pyrolysing at 450 °C and a further 10 biochars from cedar wood by pyrolysing at 50 °C intervals (250-700 °C). Batch sorption experiments were conducted to derive the maximum Cu and Zn sorption capacity of each biochar. The results revealed an exponential relationship between Cu and Zn sorption capacity and the feedstock C/N ratio and a sigmoidal relationship between the pyrolysis temperature and the maximum Cu and Zn sorption capacity. FTIR analysis revealed that as temperature increased, the abundance of functional groups reduced. We conclude that the high sorption capacity of high temperature biochars is due to an electrostatic attraction between positively charged Cu and Zn ions and delocalised pi-electrons on the greater surface area of these biochars. These findings demonstrate a method for predicting the maximum sorption capacity of a biochar based on the feedstock C/N ratio and the pyrolysis temperature.

| S-EPMC5847629 | biostudies-literature

Bio-sorption of a bi-solute system of copper and lead ions onto banana peels: characterization and optimization.

Project description:PurposeBanana peel was used as a low-cost adsorbent for the removal of Cu and Pb ions from aqueous solution in a binary system.MethodsThe interactive effects of the operating parameters such as initial concentration, pH, adsorbent dosage and particle size were studied in a batch mode using central composite design. The characterizations of banana peels were done using point of zero charge (pHpzc), Fourier infrared transform (FTIR), scanning electron microscopy (SEM) and elemental composition (EDS).ResultThe point of zero charge of banana peels was determined to be 4.83. The FTIR, SEM and EDS showed the functional groups, surface morphology and elemental composition respectively before and after the adsorption process. The analysis of variance (ANOVA) showed a good fit of coefficient of determination (R2) for Cu and Pb being 0.998 and 0.988 respectively. The percentage removal of Cu and Pb increased with increasing adsorbent dosage, however, the bio-sorption capacity of Pb was greater than Cu. The optimized variable conditions for the bio-sorption of Cu and Pb using banana peel gave 99.79% and 88.94% removal for Pb and Cu respectively with initial concentration of 100 mg/L, pH 5, adsorbent dosage of 1 g and particle size of 75 μm. The above condition gave desirability of 0.959, which denotes that the optimum conditions are acceptable.ConclusionThe regression model and the agreement between the experimental and predicted values confirmed the validity of second-order polynomial equation for the bio-sorption of Cu and Pb using banana peels.Supplementary informationThe online version contains supplementary material available at 10.1007/s40201-021-00632-x.

| S-EPMC8172653 | biostudies-literature

Eco-Friendly Electroless Template Synthesis of Cu-Based Composite Track-Etched Membranes for Sorption Removal of Lead(II) Ions.

Project description:This paper reports the synthesis of composite track-etched membranes (TeMs) modified with electrolessly deposited copper microtubules using copper deposition baths based on environmentally friendly and non-toxic reducing agents (ascorbic acid (Asc), glyoxylic acid (Gly), and dimethylamine borane (DMAB)), and comparative testing of their lead(II) ion removal capacity via batch adsorption experiments. The structure and composition of the composites were investigated by X-ray diffraction technique and scanning electron and atomic force microscopies. The optimal conditions for copper electroless plating were determined. The adsorption kinetics followed a pseudo-second-order kinetic model, which indicates that adsorption is controlled by the chemisorption process. A comparative study was conducted on the applicability of the Langmuir, Freundlich, and Dubinin-Radushkevich adsorption models to define the equilibrium isotherms and the isotherm constants for the prepared composite TeMs. Based on the regression coefficients R2, it has been shown that the Freundlich model better describes the experimental data of the composite TeMs on the adsorption of lead(II) ions.

| S-EPMC10220658 | biostudies-literature

Preparation and adsorption properties of magnetic chitosan/sludge biochar composites for removal of Cu<sup>2+</sup> ions.

Project description:The magnetic chitosan/sludge biochar composite adsorbent was prepared using chitosan, Fe3O4, and sludge biochar as raw materials. The composite adsorbent was able to achieve rapid solid-liquid separation under an applied magnetic field. The morphology and microstructure of the composite adsorbent were characterized by FTIR, XRD, SEM, VSM, and BET analysis. The adsorption performance of the composite adsorbent on Cu2+ was investigated through static adsorption experiments, and the effects of adsorbent dosage, initial concentration of Cu2+, initial pH of the solution, and adsorption temperature on the adsorption efficiency of Cu2+ were discussed. The results showed that chitosan and Fe3O4 were successfully loaded on sludge biochar. When the initial concentration of Cu2+ was 30 mg/L, the dosage of the magnetic chitosan/sludge biochar composite material was 0.05 g, the adsorption time was 180 min, pH was 5, and the temperature was room temperature, the maximum removal rate of Cu2+ reached 99.77%, and the maximum adsorption capacity was 55.16 mg/g. The adsorption kinetics and adsorption isotherm data fitted well with the pseudo-second-order kinetic model and Langmuir adsorption isotherm model, indicating that the adsorption process was chemisorption with monolayer coverage.

| S-EPMC10684598 | biostudies-literature

Sorption of Cu(II), Zn(II) and Pb(II) Ions in an Aqueous Solution on the PVC-Acetylacetone Composites.

Project description:The possibility of removing Cu(II), Zn(II) and Pb(II) ions by sorption on new PVC-based composite materials with different contents of acetylacetone (acac) and porophor was investigated. Composites were characterized using a scanning electron microscope and by infrared spectral analysis (FTIR). Sorption tests were conducted at 20 °C. It has been shown that the equilibrium is established in about 4 h. The reduction in ion concentration in the solution depended on the content of both acac and porophor in the composite. The maximal reduction in ion concentration ranged from 8% to 91%, 10⁻85% and 6⁻50% for Cu(II), Zn(II) and Pb(II) ions, respectively, depending on the composite composition. The best results were obtained for the composite containing 30% w/w of acac and 10% of porophor. For this composite, the sorption capacity after 4 h sorption for Zn(II), Cu(II) and Pb(II) ions was 26.65, 25.40, and 49.68 mg/g, respectively. Kinetic data were best fitted with a pseudo⁻second-order equation.

| S-EPMC6473897 | biostudies-other

Sorption Characteristics of Polymer Brushes in Equilibrium with Solvent Vapors.

Project description:While polymer brushes in contact with liquids have been researched intensively, the characteristics of brushes in equilibrium with vapors have been largely unexplored, despite their relevance for many applications, including sensors and smart adhesives. Here, we use molecular dynamics simulations to show that solvent and polymer density distributions for brushes exposed to vapors are qualitatively different from those of brushes exposed to liquids. Polymer density profiles for vapor-solvated brushes decay more sharply than for liquid-solvated brushes. Moreover, adsorption layers of enhanced solvent density are formed at the brush-vapor interface. Interestingly and despite all of these effects, we find that solvent sorption in the brush is described rather well with a simple mean-field Flory-Huggins model that incorporates an entropic penalty for stretching of the brush polymers, provided that parameters such as the polymer-solvent interaction parameter, grafting density, and relative vapor pressure are varied individually.

| S-EPMC7558291 | biostudies-literature

Phase equilibrium in Mg-Cu-Y.

Project description:Magnesium-based bulk metallic glasses (BMG) have potential in applications ranging from biomedical to sports equipment and the Mg-Cu-Y system offers some of the most promising alloys. Phase relations and ternary solubility of the binary and ternary compounds of this system have been experimentally investigated. The Isothermal section of Mg-Cu-Y system at 673 K for the entire composition range has been constructed. Phase relations in the Cu-rich (>66 at.% Cu) region of the Mg-Cu-Y system has been determined for the first time. The homogeneity range of three ternary compounds has been determined. Solidifications behavior of several key alloys have been discussed based on the differential scanning calorimetry (DSC) experiments and thermodynamic calculations. Extensive analysis of the DSC curves has been carried out to relate them to the corresponding phase transformation reactions and temperatures. Some of the most promising metallic glass forming regions have been analyzed using thermodynamic calculations.

| S-EPMC6505671 | biostudies-literature

Sorption of Sulfamethoxazole on Inorganic Acid Solution-Etched Biochar Derived from Alfalfa.

Project description:The properties of alfalfa-derived biochars etched with phosphoric (PBC) or hydrochloric acid (ClBC) compared with raw materials (BC) were examine in this paper. SEM, FT-IR, XRD, BET and elemental analysis were performed to characterize the micromorphology and chemical structure comprehensibly. The results showed that the porous structure was enhanced, and surface area was increased via etching with inorganic acids. Batch adsorption experiments were performed for sulfamethoxazole (SMX) to biochars. The experimental data showed that modified biochars exhibited higher adsorption capacity for SMX, i.e., the adsorption quantity of ClBC and PBC had risen by 38% and 46%. The impact on pH values suggested that the physisorption, including pore-filling and electrostatic interaction, might be applied to original biochar. In addition, chemisorption also played a role, including hydrogen bonding, π-π electron donor acceptor interaction (π-π EDA), and so on. Furthermore, both pH and coexisting ions also had a certain effect on sorption. Enhancement of the electrostatic attraction between biochar and SMX might also account for the enhanced capacity of SMX at pH < 7, and coexisting ions could decrease the amount of SMX adsorbed onto biochars, mainly because of competition for adsorption sites.

| S-EPMC7926576 | biostudies-literature

Sorption of tetracycline on biochar derived from rice straw and swine manure.

Project description:Biochar is an efficient and cost-effective sorbent for removing contaminants from aqueous environments. In this study, biochar samples derived from rice straw (R) and swine manure (M) pyrolyzed at 400 °C (R400 and M400) and 600 °C (R600 and M600) were used to adsorb tetracycline from an aqueous solution. The adsorption of tetracycline on both types of biochar included multi-step adsorption processes that were well described by the pseudo-second-order kinetics model (R 2 > 0.99). The adsorption equilibrium of tetracycline on rice straw and swine manure derived biochar was reached after 24 h and 36 h respectively. The solution pH affected the adsorption processes by changing the surface charges of tetracycline and biochar. Adsorption isotherms fitted both the Langmuir and Freundlich models well. The adsorption capacity was higher in biochar derived from rice straw than in biochar derived from swine manure, and increased with increasing pyrolysis temperature. Thermodynamic analysis revealed a spontaneous and endothermic tetracycline adsorption process. The values of the adsorption coefficient (K d) were on the order of 103 for R600 and 102-103 for the other three types of biochar. These experiments indicate that R600 can be used as an inexpensive adsorbent to remove tetracycline from aqueous solutions, but swine manure derived biochar needs more improvement to be a suitable adsorbent.

| S-EPMC9080314 | biostudies-literature

Sorption of tetracycline on biochar derived from rice straw under different temperatures.

Project description:Biochars produced from the pyrolysis of waste biomass under limited oxygen conditions could serve as adsorbents in environmental remediation processes. Biochar samples derived from rice straw that were pyrolyzed at 300 (R300), 500 (R500) and 700°C (R700) were used as adsorbents to remove tetracycline from an aqueous solution. Both the Langmuir and Freundlich models fitted the adsorption data well (R2 > 0.919). The adsorption capacity increased with pyrolysis temperature. The R500 and R700 samples exhibited relative high removal efficiencies across a range of initial tetracycline concentrations (0.5mg/L-32mg/L) with the maximum (92.8%-96.7%) found for adsorption on R700 at 35°C. The relatively high surface area of the R700 sample and π-π electron-donor acceptor contributed to the high adsorption capacities. A thermodynamic analysis indicated that the tetracycline adsorption process was spontaneous and endothermic. The pH of solution was also found to influence the adsorption processes; the maximum adsorption capacity occurred at a pH of 5.5. These experimental results highlight that biochar derived from rice straw is a promising candidate for low-cost removal of tetracycline from water.

| S-EPMC5549735 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data