Recent Progress on PEDOT-Based Thermoelectric Materials.
Ontology highlight
ABSTRACT:
SUBMITTER: Wei Q
PROVIDER: S-EPMC5455279 | biostudies-other | 2015 Feb
REPOSITORIES: biostudies-other
Similar Datasets
Project description:Flexible Ag2Se NW/PEDOT:PSS thermoelectric composite films with different Ag2Se contents (10, 20, 30, 50, 70, and 80 wt.%) are fabricated. The Ag2Se nanowires are first fabricated with solution mixing. After that, Ag2Se NW/PEDOT:PSS composite film was fabricated using a simple drop-casting method. To evaluate the potential applications of the Ag2Se NW/PEDOT:PSS composite, their thermoelectric properties are analyzed according to their Ag2Se contents, and strategies for maximizing the thermoelectric power factor are discussed. The maximum room-temperature power factor of composite film (178.59 μW/m·K2) is obtained with 80 wt.% Ag2Se nanowires. In addition, the composite film shows outstanding durability after 1000 repeat bending cycles. This work provides an important strategy for the fabrication of high-performance flexible thermoelectric composite films, which can be extended to other inorganic/organic composites and will certainly promote their development and thermoelectric applications.
| S-EPMC7764283 | biostudies-literature
Project description:We present a simple thermoelectric device that consists of a conductive poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)-based inorganic/organic thermoelectric film with high thermoelectric performance. The PEDOT:PSS-coated Se NWs were first chemically synthesized in situ, and then mixed with an Ag precursor solution to produce the PEDOT:PSS-coated Ag2Se NWs. The PEDOT:PSS matrix was then treated with dimethyl sulfoxide (DMSO) prior to the production of flexible PEDOT:PSS-coated Ag2Se NW/PEDOT:PSS composite films with various weight fractions of Ag2Se via a simple drop-casting method. The thermoelectric properties (Seebeck coefficient, electrical conductivity, and power factor) of the composite films were then analyzed. The composite film with 50 wt.% NWs exhibited the highest power factor of 327.15 ?W/m·K2 at room temperature. The excellent flexibility of this composite film was verified by bending tests, in which the thermoelectric properties were reduced by only ~5.9% after 1000 bending cycles. Finally, a simple thermoelectric device consisting of five strips of the proposed composite film was constructed and was shown to generate a voltage of 7.6 mV when the temperature difference was 20 K. Thus, the present study demonstrates that that the combination of a chalcogenide and a conductive composite film can produce a high-performance flexible thermoelectric composite film.
| S-EPMC7826913 | biostudies-literature
Project description:The development and commercialization of lithium ion batteries is rooted in material discovery. Promising new materials with high energy density are required for achieving the goal toward alternative forms of transportation. Over the past decade, significant progress and effort has been made in developing the new generation of Li-ion battery materials. In the review, I will focus on the recent advance of tin- and silicon-based anode materials. Additionally, new polyoxyanion cathodes, such as phosphates and silicates as cathode materials, will also be discussed.
| S-EPMC5452126 | biostudies-other
Project description:This article reviews recent progress in the development of lectin-based biosensors used for the determination of glucose, pathogenic bacteria and toxins, cancer cells, and lectins. Lectin proteins have been widely used for the construction of optical and electrochemical biosensors by exploiting the specific binding affinity to carbohydrates. Among lectin proteins, concanavalin A (Con A) is most frequently used for this purpose as glucose- and mannose-selective lectin. Con A is useful for immobilizing enzymes including glucose oxidase (GOx) and horseradish peroxidase (HRP) on the surface of a solid support to construct glucose and hydrogen peroxide sensors, because these enzymes are covered with intrinsic hydrocarbon chains. Con A-modified electrodes can be used as biosensors sensitive to glucose, cancer cells, and pathogenic bacteria covered with hydrocarbon chains. The target substrates are selectively adsorbed to the surface of Con A-modified electrodes through strong affinity of Con A to hydrocarbon chains. A recent topic in the development of lectin-based biosensors is a successful use of nanomaterials, such as metal nanoparticles and carbon nanotubes, for amplifying output signals of the sensors. In addition, lectin-based biosensors are useful for studying glycan expression on living cells.
| S-EPMC5458863 | biostudies-other
Project description:In this review, we briefly introduce our efforts to reconstruct cellular life processes by mimicking natural systems and the applications of these systems to energy and environmental problems. Functional units of in vitro cellular life processes are based on the fabrication of artificial organelles using protein-incorporated polymersomes and the creation of bioreactors. This concept of an artificial organelle originates from the first synthesis of poly(siloxane)-poly(alkyloxazoline) block copolymers three decades ago and the first demonstration of protein activity in the polymer membrane a decade ago. The increased value of biomimetic polymers results from many research efforts to find new applications such as functionally active membranes and a biochemical-producing polymersome. At the same time, foam research has advanced to the point that biomolecules can be efficiently produced in the aqueous channels of foam. Ongoing research includes replication of complex biological processes, such as an artificial Calvin cycle for application in biofuel and specialty chemical production, and carbon dioxide sequestration. We believe that the development of optimally designed biomimetic polymers and stable/biocompatible bioreactors would contribute to the realization of the benefits of biomimetic systems. Thus, this paper seeks to review previous research efforts, examine current knowledge/key technical parameters, and identify technical challenges ahead.
| S-EPMC5452742 | biostudies-other
Project description:UnlabelledThe thermoelectric properties of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PedotPSS) and tellurium-PedotPSS (Te-PedotPSS) hybrid composites were enhanced via simple chemical treatment. The performance of thermoelectric materials is determined by their electrical conductivity, thermal conductivity, and Seebeck coefficient. Significant enhancement of the electrical conductivity ofPedotPSS and Te-PedotPSS hybrid composites from 787.99 and 11.01 to 4839.92 and 334.68 S cm(-1), respectively was achieved by simple chemical treatment with H2SO4. The power factor of the developed materials could be effectively tuned over a very wide range depending on the concentration of the H2SO4 solution used in the chemical treatment. The power factors of the developed thermoelectric materials were optimized to 51.85 and 284 ?W m(-1) K(-2), respectively, which represent an increase of four orders of magnitude relative to the corresponding parameters of the untreated thermoelectric materials. Using the Te-PedotPSS hybrid composites, a flexible thermoelectric generator that could be embedded in textiles was fabricated by a printing process. This thermoelectric array generates a thermoelectric voltage of 2 mV using human body heat.
| S-EPMC4700464 | biostudies-literature
Project description:Liquid-like materials are one family of promising thermoelectric materials discovered in the past years due to their advantanges of ultrahigh thermoelectric figure of merit (zT), low cost, and environmental friendliness. However, their practial applications are greatly limited by the low service stability from the Cu/Ag metal deposition under large current and/or temperature gradient. Both high zT for high efficiency and large critical voltage for good stability are required for liquid-like materials, but they are usually strongly correlated and hard to be tuned individually. Herein, based on the thermodynamic analysis, it is shown that such a correlation can be decoupled through doping immobile ions into the liquid-like sublattice. Taking Cu2- ? S as an example, doping immobile Fe ions in Cu1.90S scarcely degrades the initial large critical voltage, but significantly enhances the zT to 1.5 at 1000 K by tuning the carrier concentration to the optimal range. Combining the low-cost and environmentally friendly features, these Fe-doped Cu2- ? S-based compounds show great potential in civil applications. This study sheds light on the realization of both good stability and high performance for many other liquid-like thermoelectric materials that have not been considered for real applications before.
| S-EPMC6947709 | biostudies-literature
Project description:Thermoelectric modules, consisting of multiple pairs of n- and p-type legs, enable converting heat into electricity and vice versa. However, the thermoelectric performance is often asymmetrical, in that one type outperforms the other. In this paper, we identified the relationship between the asymmetrical thermoelectric performance and the weighted mobility ratio, a correlation that can help predict the thermoelectric performance of unreported materials. Here, a reasonably high ZT for the n-type ZrCoBi-based half-Heuslers is first predicted and then experimentally verified. A high peak ZT of ~1 at 973 K can be realized by ZrCo0.9Ni0.1Bi0.85Sb0.15. The measured heat-to-electricity conversion efficiency for the unicouple of ZrCoBi-based materials can be as high as ~10% at the cold-side temperature of ~303 K and at the hot-side temperature of ~983 K. Our work demonstrates that the ZrCoBi-based half-Heuslers are highly promising for the application of mid- and high-temperature thermoelectric power generation.
| S-EPMC6588382 | biostudies-literature
Project description:We synthesized a hybrid nanocomposite comprised of selenium nanoparticles coated with a thin layer of a conductive polymer, poly(3,4-ethylenedioxythiophene), and studied its thermoelectric properties. The conductive polymer layer on the surface of nanoparticles in the composites formed a percolating network running between the stacked nanoparticles, exhibiting an electrical conductivity close to or higher than that of pure polymer. The thermoelectric power factor of the resulting composite was higher than that of individual polymer or selenium nanoparticles. We further increased the electrical conductivity of the composite by thermal annealing, thereby improving the power factor to 15 μW/cmK2 which is nine times higher than that of the polymer.
| S-EPMC6631964 | biostudies-literature
Project description:In this study, we prepared Te nanorod arrays via a galvanic displacement reaction (GDR) on a Si wafer, and their composite with poly(3,4-ethylenedioxythiophene) (PEDOT) were successfully synthesized by electrochemical polymerization with lithium perchlorate (LiClO4) as a counter ion. The thermoelectric performance of the composite film was optimized by adjusting the polymerization time. As a result, a maximum power factor (PF) of 235 µW/mK2 was obtained from a PEDOT/Te composite film electrochemically polymerized for 15 s at room temperature, which was 11.7 times higher than that of the PEDOT film, corresponding to a Seebeck coefficient (S) of 290 µV/K and electrical conductivity (σ) of 28 S/cm. This outstanding PF was due to the enhanced interface interaction and carrier energy filtering effect at the interfacial potential barrier between the PEDOT and Te nanorods. This study demonstrates that the combination of an inorganic Te nanorod array with electrodeposited PEDOT is a promising strategy for developing high-performance thermoelectric materials.
| S-EPMC8745889 | biostudies-literature