Dataset Information

Engineering Behavior and Characteristics of Wood Ash and Sugarcane Bagasse Ash.

ABSTRACT: Biomasses are organic materials that are derived from any living or recently-living structure. Plenty of biomasses are produced nationwide. Biomasses are mostly combusted and usually discarded or disposed of without treatment as biomass ashes, which include wood and sugarcane bagasse ashes. Thus, recycling or treatment of biomass ashes leads to utilizing the natural materials as an economical and environmental alternative. This study is intended to provide an environmental solution for uncontrolled disposal of biomass ashes by way of recycling the biomass ash and replacing the soils in geotechnical engineering projects. Therefore, in this study, characteristic tests of wood and sugarcane bagasse ashes that are considered the most common biomass ashes are conducted. The test of chemical compositions of biomass ashes is conducted using energy dispersive X-ray spectroscopy (EDS), and Scanning Electron Microscope (SEM), and heavy metal analysis is also conducted. Engineering behaviors including hydraulic conductivity, constrained modulus and shear modulus are examined. Also, coal fly ash Class C is used in this study for comparison with biomass ashes, and Ottawa 20/30 sands containing biomass ashes are examined to identify the soil replacement effect of biomass ashes. The results show that the particle sizes of biomass ashes are halfway between coal fly ash Class C and Ottawa 20/30 sand, and biomass ashes consist of a heterogeneous mixture of different particle sizes and shapes. Also, all heavy metal concentrations were found to be below the US Environmental Protection Agency (EPA) maximum limit. Hydraulic conductivity values of Ottawa 20/30 sand decrease significantly when replacing them with only 1%-2% of biomass ashes. While both the constrained modulus and shear modulus of biomass ashes are lower than Ottawa 20/30 sand, those of mixtures containing up to 10% biomass ashes are little affected by replacing the soils with biomass ashes.

SUBMITTER: Grau F

PROVIDER: S-EPMC5455406 | biostudies-other | 2015 Oct

REPOSITORIES: biostudies-other

ACCESS DATA

Similar Datasets

Project description:BACKGROUND:Most ?-glucosidases reported are sensitive to the end product (glucose), making it the rate limiting component of cellulase for efficient degradation of cellulose through enzymatic route. Thus, there are ongoing interests in searching for glucose-tolerant ?-glucosidases, which are still active at high glucose concentration. Although many ?-glucosidases with different glucose-tolerance levels have been isolated and characterized in the past decades, the effects of glucose-tolerance on the hydrolysis of cellulose are not thoroughly studied. RESULTS:In the present study, a novel ?-glucosidase (Bgl6) with the half maximal inhibitory concentration (IC 50) of 3.5 M glucose was isolated from a metagenomic library and characterized. However, its poor thermostability at 50 °C hindered the employment in cellulose hydrolysis. To improve its thermostability, random mutagenesis was performed. A thermostable mutant, M3, with three amino acid substitutions was obtained. The half-life of M3 at 50 °C is 48 h, while that of Bgl6 is 1 h. The K cat/K m value of M3 is 3-fold higher than that of Bgl6. The mutations maintained its high glucose-tolerance with IC 50 of 3.0 M for M3. In a 10-h hydrolysis of cellobiose, M3 completely converted cellobiose to glucose, while Bgl6 reached a conversion of 80 %. Then their synergistic effects with the commercial cellulase (Celluclast 1.5 L) on hydrolyzing pretreated sugarcane bagasse (SCB) were investigated. The supplementation of Bgl6 or mutant M3 to Celluclast 1.5 L significantly improved the SCB conversion from 64 % (Celluclast 1.5 L alone) to 79 % (Bgl6) and 94 % (M3), respectively. To further evaluate the application potential of M3 in high-solids cellulose hydrolysis, such reactions were performed at initial glucose concentration of 20-500 mM. Results showed that the supplementation of mutant M3 enhanced the glucose production from SCB under all the conditions tested, improving the SCB conversion by 14-35 %. CONCLUSIONS:These results not only clearly revealed the significant role of glucose-tolerance in cellulose hydrolysis, but also showed that mutant M3 may be a potent candidate for high-solids cellulose refining.

Project description:Brazil is the world’s second largest producer of ethanol. Increasing demand for this biofuel has called for investment in new technologies. One example of such technologies is the second-generation (2G) ethanol production. Lignocellulose comprises mainly cellulose and hemicellulose, which consist of high-energy sugars that can be converted into ethanol. Aspergillus sp play an important role in the recycling of lignocellulosic biomass. These species have been investigated as a cell factory to produce industrial enzymes. To improve our understanding of the mechanisms used by Aspergillus sp during degradation of plant biomass and to identify the hydrolytic enzymes secreted by these fungi, we have analyzed the transcriptome and secretome of an Aspergillus species grown on sugarcane bagasse (SEB). A. fumigatus was cultivated in the presence of fructose or SEB. Its cellulolytic and xylanolytic activities depended on time. The maximum activities of endoglucanase and xylanase from the fungus grown on SEB were 0.0029 and 10.82 U mL-1, respectively. Characterization of the transcriptome by RNAseq technology helped to identify genes that participated in the degradation of the biomass demonstrating potential application in the process of enzymatic hydrolysis. The RNAseq data revealed that 2287 genes were differentially expressed in the fungus grown on SEB; 1181 and 1046 of these genes were up- and down-regulated, respectively. There were several CAZymes among the up-regulated genes. Most of these enzymes belonged to the GH family, which includes important hydrolytic and accessory enzymes involved in the degradation of lignocellulose. Similarly, proteomic studies showed that a total of 130 proteins existed in the fungus grown on SEB. These proteins were classified into several groups of secreted extracellular enzymes, and their functional classification demonstrated that 59% of the proteins were CAZymes such as GH45-endoglucanases, GH6 and GH7-cellobiohydrolases, GH3-β-glucosidases, GH10-xylanases, and AA9-LPMO. Data obtained by transcriptome and secretome analyses indicated that A. fumigatus produces a considerable number of CAZymes that participate in the hydrolysis of biomass. These CAZymes are valuable for the lignocellulosic bioenergy industry, provide information for future studies on the degradation of biomass, and improve understanding of the role genes and enzymes play in the degradation process.

Project description:BackgroundPretreatment of lignocellulosic biomass is a prerequisite for effective saccharification to produce fermentable sugars. In this study, "green" solvent systems based on acidified mixtures of glycerol carbonate (GC) and glycerol were used to treat sugarcane bagasse and the roles of each solvent in deconstructing biomass were determined.ResultsPretreatment of sugarcane bagasse at 90°C for only 30 min with acidified GC produced a solid residue having a glucan digestibility of 90% and a glucose yield of 80%, which were significantly higher than a glucan digestibility of 16% and a glucose yield of 15% obtained for bagasse pretreated with acidified ethylene carbonate (EC). Biomass compositional analyses showed that GC pretreatment removed more lignin than EC pretreatment (84% vs 54%). Scanning electron microscopy (SEM) showed that fluffy and size-reduced fibres were produced from GC pretreatment whereas EC pretreatment produced compact particles of reduced size. The maximal glucan digestibility and glucose yield of GC/glycerol systems were about 7% lower than those of EC/ethylene glycol (EG) systems. Replacing up to 50 wt% of GC with glycerol did not negatively affect glucan digestibility and glucose yield. The results from pretreatment of microcrystalline cellulose (MCC) showed that (1) pretreatment with acidified alkylene glycol (AG) alone increased enzymatic digestibility compared to pretreatments with acidified alkylene carbonate (AC) alone and acidified mixtures of AC and AG, (2) pretreatment with acidified GC alone slightly increased, but with acidified EC alone significantly decreased, enzymatic digestibility compared to untreated MCC, and (3) there was a good positive linear correlation of enzymatic digestibility of treated and untreated MCC samples with congo red (CR) adsorption capacity.ConclusionsAcidified GC alone was a more effective solvent for pretreatment of sugarcane bagasse than acidified EC alone. The higher glucose yield obtained with GC-pretreated bagasse is possibly due to the presence of one hydroxyl group in the GC molecular structure, resulting in more significant biomass delignification and defibrillation, though both solvent pretreatments reduced bagasse particles to a similar extent. The maximum glucan digestibility of GC/glycerol systems was less than that of EC/EG systems, which is likely attributed to glycerol being less effective than EG in biomass delignification and defibrillation. Acidified AC/AG solvent systems were more effective for pretreatment of lignin-containing biomass than MCC.

Dataset Information

Engineering Behavior and Characteristics of Wood Ash and Sugarcane Bagasse Ash.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets