Browse
Submit Data
Databases
API
Help

Dataset Information

21 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Corrosion Behavior of Detonation Gun Sprayed Fe-Al Type Intermetallic Coating.

ABSTRACT: The detonation gun sprayed Fe-Al type coatings as an alternative for austenitic valve steel, were investigated using two different methods of testing corrosion resistance. High temperature, 10-hour isothermal oxidation experiments at 550, 750, 950 and 1100 °C show differences in the oxidation behavior of Fe-Al type coatings under air atmosphere. The oxide layer ensures satisfying oxidation resistance, even at 950 and 1100 °C. Hematite, α-Al₂O₃ and metastable alumina phases were noticed on the coatings top surface, which preserves its initial thickness providing protection to the underlying substrate. In general, only negligible changes of the phase composition of the coatings were noticed with simultaneous strengthening controlled in the micro-hardness measurements, even after 10-hours of heating at 1100 °C. On the other hand, the electrochemical corrosion tests, which were carried out in 200 ppm Cl- (NaCl) and pH ~4 (H₂SO₄) solution to simulate the acid-rain environment, reveal higher values of the breakdown potential for D-gun sprayed Fe-Al type coatings than the ones for the bulk Fe-Al type alloy and Cr21Mn9Ni4 austenitic valve steel. This enables these materials to be used in structural and multifunctional applications in aggressive environments, including acidic ones.

SUBMITTER: Senderowski C

PROVIDER: S-EPMC5455446 | biostudies-other | 2015 Mar

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

High-Temperature Oxidation of Fe₃Al Intermetallic Alloy Prepared by Additive Manufacturing LENS.

Project description:The isothermal oxidation of Fe-28Al-5Cr (at%) intermetallic alloy microalloyed with Zr and B (<0.08 at%) in air atmosphere, in the temperature range of 1000 to 1200 °C, was studied. The investigation was carried out on the thin-walled (<1 mm) elements prepared by Laser Engineered Net Shaping (LENS) from alloy powder of a given composition. Characterization of the specimens, after the oxidation, was conducted using X-ray diffraction (XRD) and scanning electron microscopy (SEM, with back-scatter detector (BSE) and energy-dispersive X-ray spectroscopy (EDS) attachments). The investigation has shown, that the oxidized samples were covered with a thin, homogeneous α-Al₂O₃ oxide layers. The intensity of their growth indicates that the material lost its resistance to oxidation at 1200 °C. Structural analysis of the thin-walled components' has not shown intensification of the oxidation process at the joints of additive layers.

| S-EPMC5507047 | biostudies-other

Influence of Temperature on Corrosion Behavior of 2A02 Al Alloy in Marine Atmospheric Environments.

Project description:The corrosion behavior of 2A02 Al alloy under 4 mg/cm² NaCl deposition at different temperatures (from 30 to 80 °C) has been studied. This corrosion behavior was researched using mass-gain, scanning electron microscopy-SEM, laser scanning confocal microscopy-LSCM, X-ray photoelectron spectroscopy-XPS and other techniques. The results showed and revealed that the corrosion was maximal at 60 °C after 200 h of exposure. The increase of temperature not only affected the solubility of oxygen gas in the thin film, but also promoted the transport of ions (such as Cl-), and the formation of protective AlO(OH), which further affects the corrosion speed.

| S-EPMC5848932 | biostudies-literature

Electrochemical Corrosion Behavior of Ta₂N Nanoceramic Coating in Simulated Body Fluid.

Project description:In order to improve the corrosion and wear resistance of biomedical Ti-6Al-4V implants, a Ta₂N nanoceramic coating was synthesized on a Ti-6Al-4V substrate by the double glow discharge plasma process. The Ta₂N coating, composed of fine nanocrystals, with an average grain size of 12.8 nm, improved the surface hardness of Ti-6Al-4V and showed good contact damage tolerance and good adhesion strength to the substrate. The corrosion resistance of the Ta₂N coating in Ringer's physiological solution at 37 °C was evaluated by different electrochemical techniques: potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), potentiostatic polarization and capacitance measurements (Mott-Schottky approach). The evolution of the surface composition of the passive films at different applied potentials was determined by X-ray photoelectron spectroscopy (XPS). The results indicated that the Ta₂N coating showed higher corrosion resistance than both commercially pure Ta and uncoated Ti-6Al-4V in this solution, because of the formed oxide film on the Ta₂N coating having a smaller carrier density (Nd) and diffusivity (Do) of point defects. The composition of the surface passive film formed on the Ta₂N coating changed with the applied potential. At low applied potentials, the oxidation of the Ta₂N coating led to the formation of tantalum oxynitride (TaOxNy) but, subsequently, the tantalum oxynitride (TaOxNy) could be chemically converted to Ta₂O₅ at higher applied potentials.

| S-EPMC5457118 | biostudies-other

An effective and novel pore sealing agent to enhance the corrosion resistance performance of Al coating in artificial ocean water.

Project description:A new technique was accepted to fill the porosity of Al coating applied by arc thermal spray process to enhance corrosion resistance performance in artificial ocean water. The porosity is the inherent property of arc thermal spray coating process. In this study, applied coating was treated with different concentrations of ammonium phosphate mono basic (NH4H2PO4: AP) solution thereafter dried at room temperature and kept in humidity chamber for 7d to deposit uniform film. The corrosion resistance of Al coating and treated samples have been evaluated using electrochemical impedance spectroscopy (EIS) and potentiodynamic techniques with exposure periods in artificial ocean water. Electrochemical techniques, X-ray diffraction (XRD), Raman spectroscopy, atomic force microscopy (AFM) and field emission-scanning electron microscopy (FE-SEM) indicated that phosphate ion would have been retarding corrosion of Al coating effectively. The formation of AHP (Ammonium Aluminum Hydrogen Phosphate Hydrate: NH4)3Al5H6(PO4)8.18H2O) on Al coating surface after treatment with AP is nano sized, crystalline and uniformly deposited but after exposure them in artificial ocean water, they form AHPH (Aluminum hydroxide phosphate hydrate Al3(PO4)2(OH)3(H2O)5) that is very protective, adherent, uniform and plate like morphology of corrosion products. The AHPH is sparingly soluble and adherent to surface and imparted improved corrosion resistance.

| S-EPMC5291225 | biostudies-literature

Sealing the Pores of PEO Coating with Mg-Al Layered Double Hydroxide: Enhanced Corrosion Resistance, Cytocompatibility and Drug Delivery Ability.

Project description:In recent years, magnesium (Mg) alloys show a promising application in clinic as degradable biomaterials. Nevertheless, the poor corrosion resistance of Mg alloys is the main obstacle to their clinical application. Here we successfully seal the pores of plasma electrolytic oxidation (PEO) coating on AZ31 with Mg-Al layered double hydroxide (LDH) via hydrothermal treatment. PEO/LDH composite coating possess a two layer structure, an inner layer made up of PEO coating (~5 ?m) and an outer layer of Mg-Al LDH (~2 ?m). Electrochemical and hydrogen evolution tests suggest preferable corrosion resistance of the PEO/LDH coating. Cytotoxicity, cell adhesion, live/dead staining and proliferation data of rat bone marrow stem cells (rBMSCs) demonstrate that PEO/LDH coating remarkably enhance the cytocompatibility of the substrate, indicating a potential application in orthopedic surgeries. In addition, hemolysis rate (HR) test shows that the HR value of PEO/LDH coating is 1.10?±?0.47%, fulfilling the request of clinical application. More importantly, the structure of Mg-Al LDH on the top of PEO coating shows excellent drug delivery ability.

| S-EPMC5557750 | biostudies-literature

Hot Corrosion Behavior of Sputtered Nanocrystalline Coating with Yttrium Addition at 900 °C.

Project description:The high temperature corrosion behavior of sputtered nanocrystalline K38 coating with and without yttrium addition under mixed molten salt film in air was investigated. Accelerated corrosion occurred on the coating without yttrium (Y) addition locally after 60 h exposure at 900 °C, which resulted in negative weight gain in kinetics. A uniform and protective alumina scale formed on surface of the coating containing yttrium in comparison. Y enriched particle as corrosion product was observed on the top of alumina scale. The results indicated the beneficial influence of Y on the chemical stability of the protective scale in the presence of chloride. The mechanism was discussed.

| S-EPMC5453377 | biostudies-other

Thermal Fatigue Behavior of Air-Plasma Sprayed Thermal Barrier Coating with Bond Coat Species in Cyclic Thermal Exposure.

Project description:The effects of the bond coat species on the delamination or fracture behavior in thermal barrier coatings (TBCs) was investigated using the yclic thermal fatigue and thermal-shock tests. The interface microstructures of each TBC showed a good condition without cracking or delamination after flame thermal fatigue (FTF) for 1429 cycles. The TBC with the bond coat prepared by the air-plasma spray (APS) method showed a good condition at the interface between the top and bond coats after cyclic furnace thermal fatigue (CFTF) for 1429 cycles, whereas the TBCs with the bond coats prepared by the high-velocity oxygen fuel (HVOF) and low-pressure plasma spray (LPPS) methods showed a partial cracking (and/or delamination) and a delamination after 780 cycles, respectively. The TBCs with the bond coats prepared by the APS, HVOF and LPPS methods were fully delaminated (>50%) after 159, 36, and 46 cycles, respectively, during the thermal-shock tests. The TGO thickness in the TBCs was strongly dependent on the both exposure time and temperature difference tested. The hardness values were found to be increased only after the CFTF, and the TBC with the bond coat prepared by the APS showed the highest adhesive strength before and after the FTF.

| S-EPMC5521311 | biostudies-other

Corrosion-Free EMF Measurements of Zinc-Based Intermetallic Compounds at Ambient Temperature.

Project description:Material development requires in many cases information about the necessary stability of the materials against oxidation, which is encoded in the chemical activity of the constituting elements. Determination of the chemical activity is tedious, especially for metallic materials at or close to ambient temperature. To determine the chemical activity of Zn at ambient temperature, electromotive force (EMF) measurements on the intermetallic compounds ZnPd, ZnPt and Cu5 Zn8 within their respective homogeneity range were conducted. The single-phase nature of the samples was confirmed by powder X-ray diffraction, light microscopy as well as SEM/EDX analysis. To exclude oxidation, and therefore faulty determination of the electrochemical potentials, a method was developed to conduct the electrochemical measurements under non-corrosive conditions in inert atmosphere. Corrosion by the electrolyte was avoided using anhydrous dimethylformamide as aprotic solvent. From the EMF the respective intrinsic activities of zinc in the corresponding intermetallic compounds was determined. Measurements on Cu5 Zn8 and comparison to available data in literature verified the developed method allowing to retrieve thermodynamic data of ZnPd and ZnPt for the first time at ambient temperature. The herein developed and easy-to-use methodology is applicable to a wide range of metallic material by choosing appropriate compositions of the electrolyte and has the potential to boost material development.

| S-EPMC7318324 | biostudies-literature

Corrosion mechanism and kinetics of Al-Zn coating deposited by arc thermal spraying process in saline solution at prolong exposure periods.

Project description:Steel structures significantly degrades owing to corrosion especially in coastal and industrial areas where significant amounts of aggressive ions are present. Therefore, anodic metals such as Al and Zn are used to protect steel. In the present study, we provide insights for the corrosion mechanism and kinetics of Al-Zn pseudo alloy coating deposited on mild steel plate via an arc thermal spraying process in 3.5 wt.% NaCl solution in terms of its improved corrosion resistance properties at prolonged exposure durations. Electrochemical studies including open circuit potential (OCP) and electrochemical impedance spectroscopy (EIS) on the deposited coating at longer exposure durations revealed enhanced corrosion resistance properties while the morphology of corrosion products through field emission-scanning electron microscopy (FE-SEM) indicated their compactness and adherence. Furthermore, atomic force microscopy (AFM) confirmed reduced roughness when compared with that of unexposed coating. Additionally, X-ray diffraction (XRD) and Raman spectroscopy results confirmed the formation of protective, adherent, and sparingly soluble Simonkolleite (Zn5(OH)8Cl2.H2O) after 55 d of exposure in 3.5 wt.% NaCl solution. A schematic is proposed that explains the corrosion process of Al-Zn pseudo alloy coating in 3.5 wt.% NaCl solution from the deposition of coating and initiation of corrosion to longer exposure durations.

| S-EPMC6399354 | biostudies-literature

Nucleation and growth of TiAl<sub>3</sub> intermetallic phase in diffusion bonded Ti/Al Metal Intermetallic Laminate.

Project description:A novel nucleation and growth phenomenon for TiAl3 intermetallic phase in Ti/Al diffusion couple is proposed based on diffusion kinetics. The interdiffusion and intrinsic diffusion co-efficients are calculated to make evident of dominant diffusion of Al towards Ti in Ti/Al diffusion couple obtained by solid state diffusion bonding. It was surprising to observe that the diffusion rate of Al was around 20 times higher than Ti with the formation of Kirkendall pores near the Al/TiAl3 interface. With such dominant diffusion of Al towards Ti, the nucleation and growth of TiAl3 intermetallic phase in Ti/Al couple happens mainly at the Ti/TiAl3 interface rather than Al/TiAl3 interface which is evident by the presence of very fine nearly nano-sized TiAl3 nuclei/grains near the Ti/TiAl3 interface. Even though the intermetallic phase is expected to nucleate at Al/TiAl3 interface, the relatively larger TiAl3 grains near that interface depicts grain growth with minimal nucleation. The theoretical calculations on diffusion parameters are in accordance with experimental observations of TiAl3 intermetallic growth phenomenon in Ti/Al system.

| S-EPMC6235842 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data