Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Environmental and Geotechnical Assessment of the Steel Slags as a Material for Road Structure.

ABSTRACT: Slags are the final solid wastes from the steel industry. Their production from waste and associated materials is a proper implementation of the basic objectives and principles of the waste management. This study aims to investigate the chemical and selected significant geotechnical parameters of steel slag as the alternative materials used in road construction. These investigations are strongly desired for successful application in engineering. Young's modules E, and resilient modules Mr showed that their values corresponding with requirements for subbase (principal or auxiliary) and riding surface as well. Tested mechanical properties were conducted in soaked and un-soaked (optimal moisture content) conditions. The designated high content of chromium and zinc are strongly associated with the internal crystal structure of steel slag. The results do not lead to threats when they are applied in roads' structures. Mechanical characterization was obtained by performing California bearing ratio (CBR) tests for steel slag in fixed compaction and moisture content conditions. Moreover, cyclic loading of steel slag was conducted with the application of cyclic California bearing ratio (cCBR) apparatus to characterization of this material as a controlled low-strength material. Finally, field studies that consist of static load plate VSS tests were presented.

SUBMITTER: Sas W

PROVIDER: S-EPMC5455508 | biostudies-other | 2015 Jul

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Environmental impact assessment of battery boxes based on lightweight material substitution.

Project description:Power battery is one of the core components of electric vehicles (EVs) and a major contributor to the environmental impact of EVs, and reducing their environmental emissions can help enhance the sustainability of electric vehicles. Based on the principle of stiffness equivalence, the steel case of the power cell is replaced with lightweight materials, a life cycle model is established with the help of GaBi software, and its environmental impact is evaluated using the CML2001 method. The results can be summarized as follows: (1) Based on the four environmental impact categories of GWP, AP, ADP (f), and HTP, which are the global warming potential (GWP), acidification potential (AP), abiotic depletion potential (ADP (f)) and human toxicity potential (HTP), the environmental impact of lightweight materials is lower than that of the steel box. Among them, the aluminum alloy box has the largest reduction, and the Carbon Fiber Sheet Molding Compound (CF-SMC) box is the second. (2) In the sensitivity analysis of electric structure, an aluminum alloy box is still the most preferable choice for environmental impact. (3) In the sensitivity analysis of driving mileage, the aluminum alloy box body is also the best choice for vehicle life. (4) Quantitative assessment using substitution factors measures the decrease in greenhouse gas emissions following the substitution of steel battery box with lightweight materials. The adoption of aluminum alloy battery box can lead to a reduction of 1.55 tons of greenhouse gas emissions, with a substitution factor of 1.55 tC sb-1. In the case that composite materials have not been recycled commercially on a large scale, aluminum alloy is still one of the best materials for the integrated environmental impact of the whole life cycle of the battery boxes.

| S-EPMC10830552 | biostudies-literature

Insulation Cork Boards-Environmental Life Cycle Assessment of an Organic Construction Material.

Project description:Envelope insulation is a relevant technical solution to cut energy consumption and reduce environmental impacts in buildings. Insulation Cork Boards (ICB) are a natural thermal insulation material whose production promotes the recycling of agricultural waste. The aim of this paper is to determine and evaluate the environmental impacts of the production, use, and end-of-life processing of ICB. A "cradle-to-cradle" environmental Life Cycle Assessment (LCA) was performed according to International LCA standards and the European standards on the environmental evaluation of buildings. These results were based on site-specific data and resulted from a consistent methodology, fully described in the paper for each life cycle stage: Cork oak tree growth, ICB production, and end-of-life processing-modeling of the carbon flows (i.e., uptakes and emissions), including sensitivity analysis of this procedure; at the production stage-the modeling of energy processes and a sensitivity analysis of the allocation procedures; during building operation-the expected service life of ICB; an analysis concerning the need to consider the thermal diffusivity of ICB in the comparison of the performance of insulation materials. This paper presents the up-to-date "cradle-to-cradle" environmental performance of ICB for the environmental categories and life-cycle stages defined in European standards.

| S-EPMC5503064 | biostudies-other

16s RNA sequencing data from environmental and steel corrosion samples, Shoreham Harbour, UK

Project description:16s RNA gene sequencing data from seawater, bed sediment and steel corrosion samples from Shoreham Harbour, UK, collected to allow bacterial species comparisons between microbially influenced corrosion, the surrounding seawater, and the sea bed sediment at the seafloor and 50cm depth below seafloor.

2019-10-06 | E-MTAB-8373 | biostudies-arrayexpress

Environmental Preferences and Concerns of Recreational Road Runners.

Project description:Recreational road running is growing in popularity and has been linked to numerous mental and physical health benefits. However, we know little about what environmental preferences or concerns runners have regarding participation in the sport, and whether differences exist across age and gender. We conducted a cross-sectional survey on recreational road runners to investigate the type of built and natural environments road runners prefer, as well as the safety and health concerns that may affect runners' choice of environment. Responses were analyzed by age and gender. A total of 1228 road runners responded to the survey; 59.6% of respondents were women and 32.1% of respondents were men. Most respondents preferred to run on asphalt or sidewalk surfaces, and preferred well-lit, tree-lined routes. Major concerns for both men and women include animals and dangerous road conditions. Men and women differed significantly in their responses to the importance of running around others and their primary concerns while running. Results of this study serve to deepen our understanding of recreational road runners' environmental preferences and concerns, providing valuable information for public health officials and city planners alike. This information must be considered if we are to continue to encourage uptake of running as a sport and reap its health effects.

| S-EPMC8296135 | biostudies-literature

Environmental pollution assessment using Mus spretus

2013-12-31 | GSE33663 | GEO

Reuse of Boron Waste as an Additive in Road Base Material.

Project description:The amount of boron waste increases year by year. There is an urgent demand to manage it in order to reduce the environmental impact. In this paper, boron waste was reused as an additive in road base material. Lime and cement were employed to stabilize the waste mixture. Mechanical performances of stabilized mixture were evaluated by experimental methods. A compaction test, an unconfined compressive test, an indirect tensile test, a modulus test, a drying shrinkage test, and a frost resistance test were carried out. Results indicated that mechanical strengths of lime-stabilized boron waste mixture (LSB) satisfy the requirements of road base when lime content is greater than 8%. LSB can only be applied in non-frozen regions as a result of its poor frost resistance. The lime-cement-stabilized mixture can be used in frozen regions when lime and cement contents are 8% and 5%, respectively. Aggregate reduces the drying shrinkage coefficient effectively. Thus, aggregate is suggested for mixture stabilization properly. This work provides a proposal for the management of boron waste.

| S-EPMC5456754 | biostudies-other

Environmental pollution assessment using Mus spretus

Project description:We evaluated the suitability of high-throughput transcriptomics approach to monitor terrestrial ecosystems. Free-living Mus spretus from several polluted sites of Huelva (Andalusia, SW Spain) were compared with mice from DoM-CM-1ana Biological Reserve (M-bM-^@M-^\Santa OlallaM-bM-^@M-^] lagoon (SOL) used as negative control). As most popular bioindicators, M. spretus is poorly represented in gene databases, therefore limiting the use of genomics in ecotoxicological studies. To solve this problem, we used microarrays produced from mRNAs of M. musculus. Specifically we used the One-Color Gene Expression Platform commercialized by Agilent. Gene expression in Mus spretus liver was assessed in mice from 5 sites of the Spanish Southwest. Five independent experiments were performed. The arrays were hybridized with labelled cRNA samples made from pooled livers of 9 mice per sampling site. We made 4 technichal repetitions per sample.

2013-12-31 | E-GEOD-33663 | biostudies-arrayexpress

SITES Environmental Material 16S rRNA 2019

Project description:16S rRNA gene amplicon sequencing from soil, lake and stream sediment, and glacial ice from SITES (the Swedish Infrastructure for Ecosystem Science) stations.

| PRJEB82514 | ENA

Material Flow Analysis with Multiple Material Characteristics to Assess the Potential for Flat Steel Prompt Scrap Prevention and Diversion without Remelting.

Project description:Thirty-two percent of the liquid metal used to make flat steel products in Europe does not end up in a final product. Sixty percent of this material is instead scrapped during manufacturing and the remainder during fabrication of finished steel products. Although this scrap is collected and recycled, remelting this scrap requires approximately 2 MWh/t, but some of this material could instead be diverted for use in other applications without remelting. However, this diversion depends not just on the mass of scrapped steel but also on its material characteristics. To enhance our understanding of the potential for such scrap diversion, this paper presents a novel material flow analysis of flat steel produced in Europe in 2013. This analysis considers the flow of steel characterized not only by mass but, for the first time, also by grade, thickness, and coating. The results show that thin-gauge galvanized drawing steel is the most commonly demanded steel grade across the industry, and most scrap of this grade is generated by the automotive industry. There are thus potential opportunities for preventing and diverting scrap of this grade. We discuss the role of the geometric compatibility of parts and propose tessellating blanks for various car manufacturers in the same coil of steel to increase the utilization rates of steel.

| S-EPMC7145351 | biostudies-literature

An Investigation on Internal Material Loads and Modifications in Precision Turning of Steel 42CrMo4.

Project description:The functional properties of a workpiece are determined by a modification of the surface and subsurface materials. In this work, the correlation between thermo-mechanical material loads and the modification of the residual stresses is presented. While the resulting residual stresses were measured by X-ray diffraction after machining experiments, the material loads were determined using a process simulation. The experimental data (measured process forces and results from previous experiments) are used to validate the simulation, which is then applied to calculate the internal thermo-mechanical loads of the maximal temperature and the equivalent von-Mises-stresses per volume element during the machining experiments. In conclusion, a higher depth impact of mechanical loads compared to a lower depth impact of thermal loads in precision machining is observed. For the sake of novelty, the thermo-mechanical loads were plotted and interpreted in a three-dimensional fashion. Finally, cross sections of this mutual representation at certain constant material loads-thermal and mechanical-result in a process signature, which can prospectively improve the prediction of functional workpiece properties.

| S-EPMC8148541 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data