Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Enhanced Synthesis of Carbon Nanomaterials Using Acoustically Excited Methane Diffusion Flames.

ABSTRACT: Acoustically modulated methane jet diffusion flames were used to enhance carbon nanostructure synthesis. A catalytic nickel substrate was employed to collect the deposit materials at sampling position z = 10 mm above the burner exit. The fabrication of carbon nano-onions (CNOs) and carbon nanotubes (CNTs) was significantly enhanced by acoustic excitation at frequencies near the natural flickering frequency (ƒ = 20 Hz) and near the acoustically resonant frequency (ƒ = 90 Hz), respectively. At these characteristic frequencies, flow mixing was markedly enhanced by acoustic excitation, and a flame structure with a bright slender core flame was generated, which provided a favorable flame environment for the growth of carbon nanomaterials. The production rate of CNOs was high at 20 Hz (near the natural ﬂickering frequency), at which the gas temperature was about 680 °C. Additionally, a quantity of CNTs was obtained at 70-95 Hz, near the acoustically resonant frequency, at which the gas temperature was between 665 and 830 °C. However, no carbon nanomaterials were synthesized at other frequencies. The enhanced synthesis of CNOs and CNTs is attributed to the strong mixing of the fuel and oxidizer due to the acoustic excitation at resonant frequencies.

SUBMITTER: Hou SS

PROVIDER: S-EPMC5455517 | biostudies-other | 2015 Jul

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

A Kinetic Mechanism for CF3I Inhibition of Methane-Air Flames.

Project description:The influence of CF3I on the burning velocity of methane-air flame is experimentally and numerically studied. Experimental results demonstrate that the inhibition effectiveness of CF3I is very close to that of CF3Br. A detailed kinetic model of flame inhibition by CF3I is presented, based on an updated version of a previous model. The kinetic model contains 1072 reactions with 115 species including 10 iodine-containing species. Modeling results demonstrate good agreement with experimental data, and both experiments and calculations show that CF3I is only slightly less effective at reducing the burning velocity than CF3Br. The flame structure predicted from numerical simulations is analyzed and shows that main reactions of the inhibition cycle of CF3I are: H+HI=H2+I; H+I+M=HI+M; I+I+M=I2+M; H+I2=HI+I; I+CH3+M=CH3I+M; H+CH3I=CH3+HI; I+HCO=HI+CO; HI+OH=H2O+I and O+HI=I+OH.

| S-EPMC10644668 | biostudies-literature

Diffusion of methane in supercritical carbon dioxide across the Widom line.

Project description:Diffusion of methane diluted in supercritical carbon dioxide is studied by experiment and molecular simulation in the temperature range from 292.55 to 332.85 K along the isobars 9.0, 12.5 and 14.7 MPa. Measurements of the Fick diffusion coefficient are carried out with the Taylor dispersion technique. Molecular dynamics simulation and the Green-Kubo formalism are employed to obtain Fick, Maxwell-Stefan and intradiffusion coefficients as well as shear viscosity. The obtained diffusion coefficients are on the order of 10-8 m2/s. The composition, temperature and density dependence of diffusion is analyzed. The Fick diffusion coefficient of methane in carbon dioxide shows an anomaly in the near-critical region. This behavior can be attributed to the crossing of the so-called Widom line, where the supercritical fluid goes through a transition between liquid-like and gas-like states. Further, several classical equations are tested on their ability to predict this behavior and it is found that equations that explicitly include the density are better suited to predict the sharp variation of the diffusion coefficient near the critical region predicted by molecular simulation.

| S-EPMC6560060 | biostudies-literature

Hypergolics in Carbon Nanomaterials Synthesis: New Paradigms and Perspectives.

Project description:Recently we have highlighted the importance of hypergolic reactions in carbon materials synthesis. In an effort to expand this topic with additional new paradigms, herein we present novel preparations of carbon nanomaterials, such-like carbon nanosheets and fullerols (hydroxylated fullerenes), through spontaneous ignition of coffee-sodium peroxide (Na2O2) and C60-Na2O2 hypergolic mixtures, respectively. In these cases, coffee and fullerenes played the role of the combustible fuel, whereas sodium peroxide the role of the strong oxidizer (e.g., source of highly concentrated H2O2). The involved reactions are both thermodynamically and kinetically favoured, thus allowing rapid product formation at ambient conditions. In addition, we provide tips on how to exploit the released energy of such highly exothermic reactions in the generation of useful work.

| S-EPMC7249011 | biostudies-literature

In situ temperature measurements in sooting methane/air flames using synchrotron x-ray fluorescence of seeded krypton atoms.

Project description:Synchrotron x-ray fluorescence has been used to measure temperatures in optically dense gases where traditional methods would fail. These data provide a benchmark for stringent tests of computational fluid dynamics models for complex systems where physical and chemical processes are intimately linked. The experiments measured krypton number densities in a sooting, atmospheric pressure, nonpremixed coflow flame that is widely used in combustion research. The experiments not only form targets for the models, but the simulations also identify potential sources of uncertainties in the measurements, allowing for future improvements.

| S-EPMC9054011 | biostudies-literature

EXPERIMENTAL AND MODELING STUDY OF PREMIXED LAMINAR FLAMES OF ETHANOL AND METHANE.

Project description:To better understand the chemistry of the combustion of ethanol, the structure of five low pressure laminar premixed flames has been investigated: a pure methane flame (φ=1), three pure ethanol flames (φ=0.7, 1.0, and 1.3), and an ethanol/methane mixture flames (φ=1). The flames have been stabilized on a burner at a pressure of 6.7 kPa using argon as dilutant, with a gas velocity at the burner of 64.3 cm/s at 333 K. The results consist of mole fraction profiles of 20 species measured as a function of the height above the burner by probe sampling followed by online gas chromatography analyses. A mechanism for the oxidation of ethanol was proposed. The reactions of ethanol and acetaldehyde were updated and include recent theoretical calculations while that of ethenol, dimethyl ether, acetone, and propanal were added in the mechanism. This mechanism was also tested against experimental results available in the literature for laminar burning velocities and laminar premixed flame where ethenol was detected. The main reaction pathways of consumption of ethanol are analyzed. The effect of the branching ratios of reaction C2H5OH+OH→Products+H2O is also discussed.

| S-EPMC3663996 | biostudies-literature

Two Sprayer CVD Synthesis of Nitrogen-doped Carbon Sponge-type Nanomaterials.

Project description:Nitrogen-doped carbon sponge-type nanostructures (N-CSTNs) containing coaxial multiwalled carbon nanotubes are synthesized at 1020?°C by using a modified chemical vapor deposition (CVD) arrangement. Here, the CVD reactor is supplied by two flows coming from two independent sprayers (called sprayer A and sprayer B). The nebulized material in each sprayer is transported by two different gases with different flow velocities. The synthesis of carbon N-CSTNs is performed using different precursors: sprayer A contains a solution composed of ethanol, thiophene and ferrocene, whereas sprayer B contains a solution of benzylamine, thiophene and ferrocene. Samples are classified according to the position inside the reactor and characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy and thermogravimetric analysis (TGA). Samples collected at the beginning of the reactor contain curly structures with diameters of 10-100?nm. At the end of the reactor, the sample is mainly formed by one type of structure. A spongy-type material is mainly formed in the hottest zone of the tubular furnace. The N-CSTNs are highly hydrophobic with oil sorption properties, which could be used for adsorption of oil spills.

| S-EPMC5813181 | biostudies-literature

Optimization of the Synthesis of Superhydrophobic Carbon Nanomaterials by Chemical Vapor Deposition.

Project description:Demand is increasing for superhydrophobic materials in many applications, such as membrane distillation, separation and special coating technologies. In this study, we report a chemical vapor deposition (CVD) process to fabricate superhydrophobic carbon nanomaterials (CNM) on nickel (Ni)-doped powder activated carbon (PAC). The reaction temperature, reaction time and H2/C2H2 gas ratio were optimized to achieve the optimum contact angle (CA) and carbon yield (CY). For the highest CY (380%) and CA (177°), the optimal reaction temperatures were 702?°C and 687?°C, respectively. However, both the reaction time (40?min) and gas ratio (1.0) were found to have similar effects on CY and CA. Based on the Field emission scanning electron microscopy and transmission electron microscopy images, the CNM could be categorized into two main groups: a) carbon spheres (CS) free carbon nanofibers (CNFs) and b) CS mixed with CNFs, which were formed at 650 and 750?°C, respectively. Raman spectroscopy and thermogravimetric analysis also support this finding. The hydrophobicity of the CNM, expressed by the CA, follows the trend of CS-mixed CNFs (CA: 177°)?>?CS-free CNFs (CA: 167°)?>?PAC/Ni (CA: 65°). This paves the way for future applications of synthesized CNM to fabricate water-repellent industrial-grade technologies.

| S-EPMC5807387 | biostudies-literature

Dataset of temperature, heat flux and infrared emission from flat premixed laminar methane-air flames.

Project description:To enable the use of flat flame burners in the context of fire resistance testing, we present a data set covering temperature, infrared emission and heat 15 mm above the burner. A laminar premixed methane-air flame is characterized for eleven different fuel/air ratios, ranging from lean (0.9) to rich (1.45), extending an existing a widely used reference [1]. We provide complementing flame temperature readings from thermocouple measurements that can be used for calibration. In addition, broadband flame optical emissions are acquired in the visual (VIS) and the infrared (IR) spectral region. Chemiluminescence measurements reveal the spatial distribution of the OH* radicals. Heat flux density measurements with a water-cooled gauge are also provided. Finally, the expected species concentration, velocity, temperature are obtained from chemical kinetics calculations. Ambient conditions and burner control parameters are presented as supplementary data.

| S-EPMC9149011 | biostudies-literature

Super-diffusion of excited carriers in semiconductors.

Project description:The ultrafast spatial and temporal dynamics of excited carriers are important to understanding the response of materials to laser pulses. Here we use scanning ultrafast electron microscopy to image the dynamics of electrons and holes in silicon after excitation with a short laser pulse. We find that the carriers exhibit a diffusive dynamics at times shorter than 200?ps, with a transient diffusivity up to 1,000 times higher than the room temperature value, D0?30?cm2s-1. The diffusivity then decreases rapidly, reaching a value of D0 roughly 500?ps after the excitation pulse. We attribute the transient super-diffusive behaviour to the rapid expansion of the excited carrier gas, which equilibrates with the environment in 100-150?ps. Numerical solution of the diffusion equation, as well as ab initio calculations, support our interpretation. Our findings provide new insight into the ultrafast spatial dynamics of excited carriers in materials.

| S-EPMC5437287 | biostudies-literature

Nanostructure Transition of Young Soot Aggregates to Mature Soot Aggregates in Diluted Diffusion Flames.

Project description:In this study, the structural properties of soot produced in diffusion flames are analyzed to elucidate the formation of mature aggregates from large young particles. Soot samples are generated in a laminar diffusion inverted gravity flame reactor (IGFR) operated on methane, ethane, and ethylene with Ar dilution to reduce the flame temperature. Soot produced in temperature ranges from 1495K-1568 K contains 100nm-300nm particles with (i) isotropic or (ii) multiple core structures, supporting a soot maturation pathway where one young soot particle evolves into a mature fractal aggregate via an internal nucleation route. During the process, these large amorphous particles can form internal voids as the particle loses mass due to pyrolysis or oxidation. Transmission electron microscopy (TEM) shows that young soot aggregates contain a higher fraction of shorter fringes and highly curved aromatics (11% vs. 23%), which is in agreement with their higher organic carbon content (3.3%-5.4% vs. 12.1%-28.8% wt.). Increasing the flame temperature reduces the curvature of polycyclic aromatic hydrocarbons (PAHs) and allows for more efficient layer stacking as indicated by a higher percent of stacked fringes. For these gaseous fuels, carbonization appears to be primarily a function of the flame temperature and independent of the fuel composition.

| S-EPMC7453622 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data