Towards InAs/InGaAs/GaAs Quantum Dot Solar Cells Directly Grown on Si Substrate.
Ontology highlight
ABSTRACT:
SUBMITTER: Azeza B
PROVIDER: S-EPMC5455635 | biostudies-other | 2015 Jul
REPOSITORIES: biostudies-other
Similar Datasets
Project description:In this work, we successfully achieved wafer-scale low density InAs/GaAs quantum dots (QDs) for single photon emitter on three-inch wafer by precisely controlling the growth parameters. The highly uniform InAs/GaAs QDs show low density of μ0.96/μm2 within the radius of 2 cm. When embedding into a circular Bragg grating cavity on highly efficient broadband reflector (CBR-HBR), the single QDs show excellent optoelectronic properties with the linewidth of 3± 0.08 GHz, the second-order correlation factor g2(τ)=0.0322 ±0.0023, and an exciton life time of 323 ps under two-photon resonant excitation.
| S-EPMC8067461 | biostudies-literature
Project description:We proposed a precise calibration process of Al 0.9Ga0.1As/GaAs DBR micropillar cavity to match the single InAs/GaAs quantum dot (QD) exciton emission and achieve cavity mode resonance and a great enhancement of QD photoluminescence (PL) intensity. Light-matter interaction of single QD in DBR micropillar cavity (Q ∼ 3800) under weak coupling regime was investigated by temperature-tuned PL spectra; a pronounced enhancement (14.6-fold) of QD exciton emission was observed on resonance. The second-order autocorrelation measurement shows g(2)(0)=0.070, and the estimated net count rate before the first objective lens reaches 1.6×107 counts/s under continuous wave excitation, indicating highly pure single-photon emission at high count rates.
| S-EPMC7347735 | biostudies-literature
Project description:High pulse repetition rate (≥ 10 GHz) diode-pumped solid-state lasers, modelocked using semiconductor saturable absorber mirrors (SESAMs) are emerging as an enabling technology for high data rate coherent communication systems owing to their low noise and pulse-to-pulse optical phase-coherence. Quantum dot (QD) based SESAMs offer potential advantages to such laser systems in terms of reduced saturation fluence, broader bandwidth, and wavelength flexibility. Here, we describe the development of an epitaxial process for the realization of high optical quality 1.55 µm In(Ga)As QDs on GaAs substrates, their incorporation into a SESAM, and the realization of the first 10 GHz repetition rate QD-SESAM modelocked laser at 1.55 µm, exhibiting ∼2 ps pulse width from an Er-doped glass oscillator (ERGO). With a high areal dot density and strong light emission, this QD structure is a very promising candidate for many other applications, such as laser diodes, optical amplifiers, non-linear and photonic crystal based devices.
| S-EPMC3384963 | biostudies-other
Project description:The nanowire platform offers great opportunities for improving the quality and range of applications of semiconductor quantum wells and dots. Here, we present the self-catalyzed growth of InAs/InSb/InAs axial heterostructured nanowires with a single defect-free InSb quantum dot, on Si substrates, by chemical beam epitaxy. A systematic variation of the growth parameters for the InAs top segment has been investigated and the resulting nanowire morphology analyzed. We found that the growth temperature strongly influences the axial and radial growth rates of the top InAs segment. As a consequence, we can reduce the InAs shell thickness around the InSb quantum dot by increasing the InAs growth temperature. Moreover, we observed that both axial and radial growth rates are enhanced by the As line pressure as long as the In droplet on the top of the nanowire is preserved. Finally, the time evolution of the diameter along the entire length of the nanowires allowed us to understand that there are two In diffusion paths contributing to the radial InAs growth and that the interplay of these two mechanisms together with the total length of the nanowires determine the final shape of the nanowires. This study provides insights in understanding the growth mechanisms of self-catalyzed InSb/InAs quantum dot nanowires, and our results can be extended also to the growth of other self-catalyzed heterostructured nanowires, providing useful guidelines for the realization of quantum structures with the desired morphology and properties.
| S-EPMC7828319 | biostudies-literature
Project description:Semiconductor III-V photonic crystal (PC) laser is regarded as a promising ultra-compact light source with unique advantages of ultralow energy consumption and small footprint for the next generation of Si-based on-chip optical interconnects. However, the significant material dissimilarities between III-V materials and Si are the fundamental roadblock for conventional monolithic III-V-on-silicon integration technology. Here, we demonstrate ultrasmall III-V PC membrane lasers monolithically grown on CMOS-compatible on-axis Si (001) substrates by using III-V quantum dots. The optically pumped InAs/GaAs quantum-dot PC lasers exhibit single-mode operation with an ultra-low threshold of ~0.6 μW and a large spontaneous emission coupling efficiency up to 18% under continuous-wave condition at room temperature. This work establishes a new route to form the basis of future monolithic light sources for high-density optical interconnects in future large-scale silicon electronic and photonic integrated circuits.
| S-EPMC7033092 | biostudies-literature
Project description:We present the optical characterization of GaAs-based InAs quantum dots (QDs) grown by molecular beam epitaxy on a digitally alloyed InGaAs metamorphic buffer layer (MBL) with gradual composition ensuring a redshift of the QD emission up to the second telecom window. Based on the photoluminescence (PL) measurements and numerical calculations, we analyzed the factors influencing the energies of optical transitions in QDs, among which the QD height seems to be dominating. In addition, polarization anisotropy of the QD emission was observed, which is a fingerprint of significant valence states mixing enhanced by the QD confinement potential asymmetry, driven by the decreased strain with increasing In content in the MBL. The barrier-related transitions were probed by photoreflectance, which combined with photoluminescence data and the PL temperature dependence, allowed for the determination of the carrier activation energies and the main channels of carrier loss, identified as the carrier escape to the MBL barrier. Eventually, the zero-dimensional character of the emission was confirmed by detecting the photoluminescence from single QDs with identified features of the confined neutral exciton and biexciton complexes via the excitation power and polarization dependences.
| S-EPMC8839711 | biostudies-literature
Project description:Self-assembled quantum dots grown by molecular beam epitaxy have been a hotbed for various fundamental research and device applications over the past decades. Among them, InAs/GaAs quantum dots have shown great potential for applications in quantum information, quantum computing, infrared photodetection, etc. Though intensively studied, some of the optical nonlinear properties of InAs/GaAs quantum dots, specifically the associated two-photon absorption of the wetting and barrier layers, have not been investigated yet. Here we report a study of the photoluminescence of these dots by using direct two-photon excitation. The quadratic power law dependence of the photoluminescence intensity, together with the ground-state resonant peak of quantum dots appearing in the photoluminescence excitation spectrum, unambiguously confirms the occurrence of the direct two-photon absorption in the dots. A three-level rate equation model is proposed to describe the photogenerated carrier dynamics in the quantum dot-wetting layer-GaAs system. Moreover, higher-order power law dependence of photoluminescence intensity is observed on both the GaAs substrate and the wetting layer by two-photon excitation, which is accounted for by a model involving the third-harmonic generation at the sample interface. Our results open a door for understanding the optical nonlinear effects associated with this fundamentally and technologically important platform.
| S-EPMC7331710 | biostudies-literature
Project description:This paper presents a hybrid design, featuring a traditional GaAs-based solar cell combined with various colloidal quantum dots. This hybrid design effectively boosts photon harvesting at long wavelengths while enhancing the collection of photogenerated carriers in the ultraviolet region. The merits of using highly efficient semiconductor solar cells and colloidal quantum dots were seamlessly combined to increase overall power conversion efficiency. Several photovoltaic parameters, including short-circuit current density, open circuit voltage, and external quantum efficiency, were measured and analyzed to investigate the performance of this hybrid device. Offering antireflective features at long wavelengths and luminescent downshifting for high-energy photons, the quantum dots effectively enhanced overall power conversion efficiency by as high as 24.65% compared with traditional GaAs-based devices. The evolution of weighted reflectance as a function of the dilution factor of QDs was investigated. Further analysis of the quantum efficiency response showed that the luminescent downshifting effect can be as much as 6.6% of the entire enhancement of photogenerated current.
| S-EPMC4102900 | biostudies-other
Project description:Colloidal quantum dots are emerging solution-processed materials for large-scale and low-cost photovoltaics. The recent advent of quantum dot inks has overcome the prior need for solid-state exchanges that previously added cost, complexity, and morphological disruption to the quantum dot solid. Unfortunately, these inks remain limited by the photocarrier diffusion length. Here we devise a strategy based on n- and p-type ligands that judiciously shifts the quantum dot band alignment. It leads to ink-based materials that retain the independent surface functionalization of quantum dots, and it creates distinguishable donor and acceptor domains for bulk heterojunctions. Interdot carrier transfer and exciton dissociation studies confirm efficient charge separation at the nanoscale interfaces between the two classes of quantum dots. We fabricate the first mixed-quantum-dot solar cells and achieve a power conversion of 10.4%, which surpasses the performance of previously reported bulk heterojunction quantum dot devices fully two-fold, indicating the potential of the mixed-quantum-dot approach.
| S-EPMC5673898 | biostudies-literature
Project description:Current laser-based display and lighting applications are invariably using blue laser diodes (LDs) grown on free-standing GaN substrates, which are costly and smaller in size compared with other substrate materials.1-3 Utilizing less expensive and large-diameter Si substrates for hetero-epitaxial growth of indium gallium nitride/gallium nitride (InGaN/GaN) multiple quantum well (MQW) structure can substantially reduce the cost of blue LDs and boost their applications. To obtain a high crystalline quality crack-free GaN thin film on Si for the subsequent growth of a blue laser structure, a hand-shaking structure was formed by inserting Al-composition step down-graded AlN/AlxGa1-xN buffer layers between GaN and Si substrate. Thermal degradation in InGaN/GaN blue MQWs was successfully suppressed with indium-rich clusters eliminated by introducing hydrogen during the growth of GaN quantum barriers (QBs) and lowering the growth temperature for the p-type AlGaN/GaN superlattice optical cladding layer. A continuous-wave (CW) electrically pumped InGaN/GaN quantum well (QW) blue (450 nm) LD grown on Si was successfully demonstrated at room temperature (RT) with a threshold current density of 7.8 kA/cm2.
| S-EPMC6106987 | biostudies-literature