Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Surface Attachment of Gold Nanoparticles Guided by Block Copolymer Micellar Films and Its Application in Silicon Etching.

ABSTRACT: Patterning metallic nanoparticles on substrate surfaces is important in a number of applications. However, it remains challenging to fabricate such patterned nanoparticles with easily controlled structural parameters, including particle sizes and densities, from simple methods. We report on a new route to directly pattern pre-formed gold nanoparticles with different diameters on block copolymer micellar monolayers coated on silicon substrates. Due to the synergetic effect of complexation and electrostatic interactions between the micellar cores and the gold particles, incubating the copolymer-coated silicon in a gold nanoparticles suspension leads to a monolayer of gold particles attached on the coated silicon. The intermediate micellar film was then removed using oxygen plasma treatment, allowing the direct contact of the gold particles with the Si substrate. We further demonstrate that the gold nanoparticles can serve as catalysts for the localized etching of the silicon substrate, resulting in nanoporous Si with a top layer of straight pores.

SUBMITTER: Wei M

PROVIDER: S-EPMC5455671 | biostudies-other | 2015 Jun

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Thermoresponsive Pyrrolidone Block Copolymer Organogels from 3D Micellar Networks.

Project description:A new series of amphiphilic pyrrolidone diblock copolymers poly[N-(2-methacrylaoyxyethyl)pyrrolidone]-block-poly(methyl methacrylate) (PNMP m -b-PMMA n ; where m is fixed at 37 and n is varied from 45 to 378) is developed. Spontaneously situ-gelling behaviors are observed in isopropanol when n varies from 117 to 230, whereas only dissolution or precipitation appears when n is beyond this region. Further analysis reveals that uniform thermoinduced reversible gel-sol transitions are observed in those organogels, which is attributed to the disassembly from micellar networks to micelles as confirmed by electron microscopy and other techniques. The gel-sol transition temperature is highly dependent on n and increases as n increases. Conformational interactions analyzed using 1H NMR and 2D Noesy NMR suggest that the thermoinduced stretch of solvophilic PNMP segments within micelles and the sequencing variation in the isopropanol molecules are the major cause of the gel-sol transitions.

| S-EPMC6640968 | biostudies-literature

Electrochemical preparation system for unique mesoporous hemisphere gold nanoparticles using block copolymer micelles.

Project description:Gold nanoparticles (AuNPs) are widely used in various applications, such as biological delivery, catalysis, and others. In this report, we present a novel synthetic method to prepare mesoporous hemisphere gold nanoparticles (MHAuNPs) via electrochemical reduction reaction with the aid of polymeric micelle assembly as a pore-directing agent.

| S-EPMC9049955 | biostudies-literature

Lateral Order and Self-Organized Morphology of Diblock Copolymer Micellar Films.

Project description:We report the lateral order and self-organized morphology of diblock copolymer polystyrene-block-poly(2-vinylpyridine), P(S-b-2VP), and micelles on silicon substrates (SiOx/Si). These micellar films were prepared by spin coating from polymer solutions of varied concentration of polymer in toluene onto SiOx/Si, and were investigated with grazing-incidence small-angle X-ray scattering (GISAXS) and an atomic force microscope (AFM). With progressively increased surface coverage with increasing concentration, loosely packed spherical micelles, ribbon-like nanostructures, and a second layer of spherical micelles were obtained sequentially. Quantitative analysis and simulations of the micellar packing demonstrates that the spatial ordering of the loosely packed spherical micelles altered from short-range order to hexagonal order when the micellar coverage increased from small to moderate densities of the covered surface. At large densities, anisotropic fusion between spherical micelles caused the ribbon-like nanostructures to have a short-range spatial order; the ordering quality of the second layer was governed by the rugged surface of the underlying layer because the valleys between the ribbon-like nanostructures allowed for further deposition of spherical micelles.

| S-EPMC6404033 | biostudies-literature

Thiol-reactive amphiphilic block copolymer for coating gold nanoparticles with neutral and functionable surfaces.

Project description:Nanoparticles designed for biomedical applications are often coated with polymers containing reactive functional groups, such as -COOH and -NH2, to conjugate targeting ligands or drugs. However, introducing highly charged surfaces promotes binding of the nanoparticles to biomolecules in biological systems through ionic interactions, causing the nanoparticles to aggregate in biological environments and consequently undergo strong non-specific binding to off-target cells and tissues. Developing a unique polymer with neutral surfaces that can be further functionalized directly would be critical to develop suitable nanomaterials for nanomedicine. Here, we report a thiol-reactive amphiphilic block copolymer poly(ethylene oxide)-block-poly(pyridyldisulfide ethylmeth acrylate) (PEO-b-PPDSM) for coating gold nanoparticles (AuNPs). The resultant polymer-coated AuNPs have almost neutral surfaces with slightly negative zeta potentials from -10 to 0 mV over a wide pH range from 2 to 12. Although the zeta potential is close to zero we show that the PEO-b-PPDSM copolymer-coated AuNPs have both good stability in various physiological conditions and reduced non-specific adsorption of proteins/biomolecules. Because of the multiple pyridyldisulfide groups on the PPDSM block, these individually dispersed nanocomplexes with an overall hydrodynamic size around 43.8 nm can be directly functionalized via disulfide-thiol exchange chemistry.

| S-EPMC3979584 | biostudies-literature

Hierarchical Self-Assembly of Thickness-Modulated Block Copolymer Thin Films for Controlling Nanodomain Orientations inside Bare Silicon Trenches.

Project description:We study the orientation and ordering of nanodomains of a thickness-modulated lamellar block copolymer (BCP) thin film at each thickness region inside a topological nano/micropattern of bare silicon wafers without chemical pretreatments. With precise control of the thickness gradient of a BCP thin film and the width of a bare silicon trench, we successfully demonstrate (i) perfectly oriented lamellar nanodomains, (ii) pseudocylindrical nanopatterns as periodically aligned defects from the lamellar BCP thin film, and (iii) half-cylindrical nanostructure arrays leveraged by a trench sidewall with the strong preferential wetting of the PMMA block of the BCP. Our strategy is simple, efficient, and has an advantage in fabricating diverse nanopatterns simultaneously compared to conventional BCP lithography utilizing chemical pretreatments, such as a polymer brush or a self-assembled monolayer (SAM). The proposed self-assembly nanopatterning process can be used in energy devices and biodevices requiring various nanopatterns on the same device and as next-generation nanofabrication processes with minimized fabrication steps for low-cost manufacturing techniques.

| S-EPMC7918743 | biostudies-literature

Self-Assembled Copolymer Adsorption Layer-Induced Block Copolymer Nanostructures in Thin Films.

Project description:In polymer thin films, the bottom polymer chains are irreversibly adsorbed onto the substrates creating an ultrathin layer. Although this thin layer (only a few nanometers thick) governs all film properties, an understanding of this adsorbed layer remains elusive, and thus, its effective control has yet to be achieved, particularly in block copolymer (BCP) thin films. Herein, we employ self-assembled copolymer adsorption layers (SCALs), transferred from the air/water interfacial self-assembly of BCPs, as an effective control of the adsorbed layer in BCP thin films. SCALs replace the natural adsorbed layer, irreversibly adsorbing onto the substrates when other BCP is additionally coated on the SCALs. We further show that SCALs guide the thin film nanostructures because they provide topological restrictions and enthalpic/entropic preferences for a BCP self-assembly. The SCAL-induced self-assembly enables unprecedented control of nanostructures, creating novel nanopatterns such as spacing-controlled hole/dot patterns, dotted-line patterns, dash-line patterns, and anisotropic cluster patterns with exceptional controllability.

| S-EPMC6764160 | biostudies-literature

Temperature-Controlled Solvent Vapor Annealing of Thin Block Copolymer Films.

Project description:Solvent vapor annealing is as an effective and versatile alternative to thermal annealing to equilibrate and control the assembly of polymer chains in thin films. Here, we present scientific and practical aspects of the solvent vapor annealing method, including the discussion of such factors as non-equilibrium conformational states and chain dynamics in thin films in the presence of solvent. Homopolymer and block copolymer films have been used in model studies to evaluate the robustness and the reproducibility of the solvent vapor processing, as well as to assess polymer-solvent interactions under confinement. Advantages of utilizing a well-controlled solvent vapor environment, including practically interesting regimes of weakly saturated vapor leading to poorly swollen states, are discussed. Special focus is given to dual temperature control over the set-up instrumentation and to the potential of solvo-thermal annealing. The evaluated insights into annealing dynamics derived from the studies on block copolymer films can be applied to improve the processing of thin films of crystalline and conjugated polymers as well as polymer composite in confined geometries.

| S-EPMC6722758 | biostudies-literature

Block Copolymer-Encapsulated CaWO4 Nanoparticles: Synthesis, Formulation, and Characterization.

Project description:We envision that CaWO4 (CWO) nanocrystals have the potential for use in biomedical imaging and therapy because of the unique ways this material interacts with high-energy radiation. These applications, however, require development of nanoparticle (NP) formulations that are suitable for in vivo applications; primarily, the formulated nanoparticles should be sufficiently small, chemically and biologically inert, and stable against aggregation under physiological conditions. The present study demonstrates one such method of formulation, in which CWO nanoparticles are encapsulated in bioinert block copolymer (BCP) micelles. For this demonstration, we prepared three different CWO nanocrystal samples having different sizes (3, 10, and 70 nm in diameter) and shapes (elongated vs truncated rhombic). Depending on the specific synthesis method used, the as-synthesized CWO NPs contain different surfactant materials (citric acid or cetyltrimethylammonium bromide or a mixture of oleic acid and oleylamine) in the coating layers. Regardless of the type of surfactant, the original surfactant coating can be replaced with a new enclosure formed by BCP materials using a solvent-exchange method. Two types of BCPs have been tested: poly(ethylene glycol-block-n-butyl acrylate) (PEG-PnBA) and poly(ethylene glycol-block-D,L-lactic acid) (PEG-PLA). Both BCPs are able to produce fully PEGylated CWO NPs that are stable against aggregation under physiological salt conditions for very long periods of time (at least three months). The optical and radio luminescence properties of both BCP-encapsulated and surfactant-coated CWO NPs were extensively characterized. The study confirms that the BCP coating structure does not influence the luminescence properties of CWO NPs.

| S-EPMC5362163 | biostudies-literature

Fabrication of porous silicon by metal-assisted etching using highly ordered gold nanoparticle arrays.

Project description:A simple method for the fabrication of porous silicon (Si) by metal-assisted etching was developed using gold nanoparticles as catalytic sites. The etching masks were prepared by spin-coating of colloidal gold nanoparticles onto Si. An appropriate functionalization of the gold nanoparticle surface prior to the deposition step enabled the formation of quasi-hexagonally ordered arrays by self-assembly which were translated into an array of pores by subsequent etching in HF solution containing H2O2. The quality of the pattern transfer depended on the chosen preparation conditions for the gold nanoparticle etching mask. The influence of the Si surface properties was investigated by using either hydrophilic or hydrophobic Si substrates resulting from piranha solution or HF treatment, respectively. The polymer-coated gold nanoparticles had to be thermally treated in order to provide a direct contact at the metal/Si interface which is required for the following metal-assisted etching. Plasma treatment as well as flame annealing was successfully applied. The best results were obtained for Si substrates which were flame annealed in order to remove the polymer matrix - independent of the substrate surface properties prior to spin-coating (hydrophilic or hydrophobic). The presented method opens up new resources for the fabrication of porous silicon by metal-assisted etching. Here, a vast variety of metal nanoparticles accessible by well-established wet-chemical synthesis can be employed for the fabrication of the etching masks.

| S-EPMC3463426 | biostudies-literature

Transient Laser-Annealing-Induced Mesophase Transitions of Block Copolymer–Resol Thin Films

Project description:Block copolymer self-assembly-derived

| S-EPMC9954231 | biostudies-literature