Structural Rheology of the Smectic Phase.
Ontology highlight
ABSTRACT:
SUBMITTER: Fujii S
PROVIDER: S-EPMC5455810 | biostudies-other | 2014 Jul
REPOSITORIES: biostudies-other
Similar Datasets
Project description:The CO₂ absorption of liquid crystalline phases of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (Pluronic L92, (EO)₈(PO)47(EO)₈), monoethanolamine (MEA), and water, with a composition of 60% L92/10% MEA/30% water has been investigated to assess potential use in carbon capture and storage applications. Vapor⁻liquid equilibrium data of the liquid crystalline system with CO₂ was recorded up to a CO₂ partial pressure of 6 bar, where a loading of 38.6 g CO₂/kg sample was obtained. Moreover, the phase transitions occurring during the loading process were investigated by small angle X-ray scattering (SAXS), presenting a transition from lamellar + hexagonal phase to hexagonal (at 25 °C). In addition, the rheology of samples with varying loadings was also studied, showing that the viscosity increases with increasing CO₂-loading until the phase transition to hexagonal phase is completed. Finally, thermal stability experiments were performed, and revealed that L92 does not contribute to MEA degradation.
| S-EPMC6419203 | biostudies-literature
Project description:We develop a model for the rheology of a three-phase suspension of bubbles and particles in a Newtonian liquid undergoing steady flow. We adopt an 'effective-medium' approach in which the bubbly liquid is treated as a continuous medium which suspends the particles. The resulting three-phase model combines separate two-phase models for bubble suspension rheology and particle suspension rheology, which are taken from the literature. The model is validated against new experimental data for three-phase suspensions of bubbles and spherical particles, collected in the low bubble capillary number regime. Good agreement is found across the experimental range of particle volume fraction ([Formula: see text]) and bubble volume fraction ([Formula: see text]). Consistent with model predictions, experimental results demonstrate that adding bubbles to a dilute particle suspension at low capillarity increases its viscosity, while adding bubbles to a concentrated particle suspension decreases its viscosity. The model accounts for particle anisometry and is easily extended to account for variable capillarity, but has not been experimentally validated for these cases.
| S-EPMC4277193 | biostudies-literature
Project description:Knowledge of the physical and chemical properties of phospholipids, such as phase transition temperatures (Tc), is of great importance in order to reveal the functionalities of biological and artificial membranes. Our research group developed an oscillatory rheological method for the simple and rapid determination of phase transition temperatures (Tc). The phospholipids constructing the membranes undergo conformational changes at their Tc, which cause alterations of viscoelastic properties of the molecules. The oscillatory technique recommended by us proved to be appropriate to reveal the altered molecular properties of phospholipids as tracking the slightest changes in the viscoelasticity. Our study demonstrates the abrupt changes in rheological properties at Tc for the following phospholipids: 1,2-Dimyristoyl-sn-glycero-3-Phosphocholine (DMPC), 1,2-Dipalmitoyl-sn-glycero-3-Phosphatidylcholine (DPPC), and 1,2-Distearoyl-sn-glycero-3-Phosphocholine (DSPC), proving that the applied methodology is adequate for determining the Tc of phospholipids.
| S-EPMC10343600 | biostudies-literature
Project description:The catastrophic phase inversion process of model emulsions (water/Span 80-Tween 80/heptane) from oil-in-water to water-in-oil emulsion was investigated. During this process, the phase inversion of the emulsion was monitored through Fourier transform infrared spectroscopy (FT-IR). In emulsions without NaCl, oil-in-water gel emulsions are formed prior to phase inversion. As the HLB value increases, the oil volume fraction required for phase inversion becomes higher. Polydisperse distribution of the gel emulsion is observed from microscope optical images. The Turbiscan Lab stability analyzer indicates that O/W gel emulsions before the phase inversion has good stability at 50 °C. Rheological measurements reveal that emulsions exhibit non-Newtonian behavior. The viscosity of the gel emulsions increases significantly prior to phase inversion. As the oil volume fraction increases, the storage modulus and loss modulus of the gel emulsion increase to a maximum, at which catastrophic phase inversion occurs. In emulsions with NaCl, there is no oil-in-water gel emulsion formed before phase inversion. The physicochemical properties of the emulsion play a crucial role in whether gel emulsions are produced during catastrophic phase inversion. These gel emulsions have the potential to diversify the applications in crude oil extraction, drug delivery systems, packaging materials, and other fields.
| S-EPMC9730459 | biostudies-literature
Project description:Surfactant molecules can self-assemble into various morphologies under proper combinations of ionic strength, temperature, and flow conditions. At equilibrium, wormlike micelles can transition from entangled to branched and multiconnected structures with increasing salt concentration. Under certain flow conditions, micellar structural transitions follow different trajectories. In this work, we consider the flow of two semidilute wormlike micellar solutions through microposts, focusing on their microstructural and rheological evolutions. Both solutions contain cetyltrimethylammonium bromide and sodium salicylate. One is weakly viscoelastic and shear thickening, whereas the other is strongly viscoelastic and shear thinning. When subjected to strain rates of ∼10(3) s(-1) and strains of ∼10(3), we observe the formation of a stable flow-induced structured phase (FISP), with entangled, branched, and multiconnected micellar bundles, as evidenced by electron microscopy. The high stretching and flow alignment in the microposts enhance the flexibility and lower the bending modulus of the wormlike micelles. As flexible micelles flow through the microposts, it becomes energetically favorable to minimize the number of end caps while concurrently promoting the formation of cross-links. The presence of spatial confinement and extensional flow also enhances entropic fluctuations, lowering the energy barrier between states, thus increasing transition frequencies between states and enabling FISP formation. Whereas the rheological properties (zero-shear viscosity, plateau modulus, and stress relaxation time) of the shear-thickening precursor are smaller than those of the FISP, those of the shear-thinning precursor are several times larger than those of the FISP. This rheological property variation stems from differences in the structural evolution from the precursor to the FISP.
| S-EPMC3645548 | biostudies-literature
Project description:During growth, differentiation and migration of cells, the nucleus changes size and shape, while encountering forces generated by the cell itself and its environment. Although there is increasing evidence that such mechanical signals are employed to control gene expression, it remains unclear how mechanical forces are transduced through the nucleus. To this end, we have measured the compliance of nuclei by applying oscillatory strains between 1 and 700 Hz to individual nuclei of multiple mammalian cell-lines that were compressed between two plates. The quantitative response varied with more than one order of magnitude and scaled with the size of the nucleus. Surprisingly, the qualitative behaviour was conserved among different cell-lines: all nuclei showed a softer and more viscous response towards the periphery, suggesting a reduced degree of crosslinking of the chromatin. This may be an important feature to regulate transcription via mechano-transduction in this most active and dynamic region of the nucleus.
| S-EPMC5556037 | biostudies-literature
Project description:We present an experimental and numerical study of immiscible two-phase flow of Newtonian fluids in three-dimensional (3D) porous media to find the relationship between the volumetric flow rate (Q) and the total pressure difference ([Formula: see text]) in the steady state. We show that in the regime where capillary forces compete with the viscous forces, the distribution of capillary barriers at the interfaces effectively creates a yield threshold ([Formula: see text]), making the fluids reminiscent of a Bingham viscoplastic fluid in the porous medium. In this regime, Q depends quadratically on an excess pressure drop ([Formula: see text]). While increasing the flow rate, there is a transition, beyond which the overall flow is Newtonian and the relationship is linear. In our experiments, we build a model porous medium using a column of glass beads transporting two fluids, deionized water and air. For the numerical study, reconstructed 3D pore networks from real core samples are considered and the transport of wetting and non-wetting fluids through the network is modeled by tracking the fluid interfaces with time. We find agreement between our numerical and experimental results. Our results match with the mean-field results reported earlier.
| S-EPMC5522531 | biostudies-literature
Project description:Glasses have liquid-like structure, but exhibit solid-like properties. A central question concerns the relation between the structure and mechanical properties of glasses, but structural changes remain difficult to resolve. We use a novel combination of rheology and x-ray scattering to resolve structural changes in colloidal glasses and link them directly to their mechanical behavior. By combining stress and structure factor measurements, we resolve shear induced changes in the nearest neighbor configuration as a function of applied stress, allowing us to elucidate the structural origin of the genuine shear banding transition of glasses.
| S-EPMC3620665 | biostudies-other
Project description:Aging, change in property depending on the elapsed time from preparation, is known to affect the rheological behavior of various materials. Therefore, whether magma ages must be examined to characterize potentially widespread volcanic phenomena related to the transition from rest to flow. To achieve this, we performed rheological measurements and microstructural analyses on basaltic andesite lava from the 1986 Izu-Oshima eruption. The rheology shows an initial overshoot of shear stress during start-up flow that correlates with the duration and the shear rate of a pre-rest time. This indicates that the yield stress of magma and lava increases with aging. The microstructure shows that original aggregates of crystals, which may grow during crystallization, coalesce during the pre-rest period to form clusters without changing the crystal volume fraction. We conclude that the clusters are broken by shear in the start-up flow, which induces the stress overshoot. Thus, aging in magma rheology will impact the understanding of dynamic flow.
| S-EPMC9200731 | biostudies-literature
Project description:Polymer crystallization occurs in many plastic manufacturing processes, from injection molding to film blowing. Linear low-density polyethylene (LLDPE) is one of the most commonly processed polymers, wherein the type and extent of short-chain branching (SCB) may be varied to influence crystallization. In this work, we report simultaneous measurements of the rheology and Raman spectra, using a Rheo-Raman microscope, for two industrial-grade LLDPEs undergoing crystallization. These polymers are characterized by broad polydispersity, SCB and the presence of polymer chain entanglements. The rheological behavior of these entangled LLDPE melts is modeled as a function of crystallinity using a slip-link model. The partially crystallized melt is represented by a blend of linear chains with either free or crosslinked ends, wherein the crosslinks represent attachment to growing crystallites, and a modulus shift factor that increases with degree of crystallinity. In contrast to our previous application of the slip-link model to isotactic polypropylene (iPP), in which the introduction of only bridging segments with crosslinks at both ends was sufficient to describe the available data, for these LLDPEs we find it necessary to introduce dangling segments, with crosslinks at only one end. The model captures quantitatively the evolution of viscosity and elasticity with crystallization over the whole range of frequencies in the linear regime for two LLDPE grades.
| S-EPMC8200930 | biostudies-literature