Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Preparation and Characterization of Li-Ion Graphite Anodes Using Synchrotron Tomography.

ABSTRACT: We present an approach for multi-layer preparation to perform microstructure analysis of a Li-ion cell anode active material using synchrotron tomography. All necessary steps, from the disassembly of differently-housed cells (pouch and cylindrical), via selection of interesting layer regions, to the separation of the graphite-compound and current collector, are described in detail. The proposed stacking method improves the efficiency of synchrotron tomography by measuring up to ten layers in parallel, without the loss of image resolution nor quality, resulting in a maximization of acquired data. Additionally, we perform an analysis of the obtained 3D volumes by calculating microstructural characteristics, like porosity, tortuosity and specific surface area. Due to a large amount of measurable layers within one stacked sample, differences between aged and pristine material (e.g., significant differences in tortuosity and specific surface area, while porosity remains constant), as well as the homogeneity of the material within one cell could be recognized.

SUBMITTER: Mitsch T

PROVIDER: S-EPMC5455902 | biostudies-other | 2014 Jun

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Controlling Li Dendritic Growth in Graphite Anodes by Potassium Electrolyte Additives for Li-Ion Batteries.

Project description:Fast charging promotes Li dendrite formation and its growth on graphite anodes, which affects cell performance in Li-ion batteries (LIBs). This work reports the formation of a robust SEI layer by introducing a KPF6 inorganic additive into the electrolyte. An optimal concentration of 0.001 M KPF6 effectively inhibits the growth of Li dendrites at 2C charging rates, compared with a commercial electrolyte. Electrolytes containing a KPF6 additive are shown here to deliver dual effects to mitigate the growth of dendrites. A thin LiF-rich SEI layer is formed on graphite, which blocks the electron leakage pathways. Additionally, K+ resides at defect sites (such as particle boundaries) due to its faster diffusion rate and blocks the incoming Li+ and restricts the growth of Li dendrites. The electrolyte with optimum concentration of KPF6, i.e., 0.001 M, effectively directs Li+ transport through the thin, durable, and low resistance LiF-rich SEI layer. This has implications for fast charging through optimization of the electrode/electrolyte interphase by controlling additive concentrations.

| S-EPMC9501903 | biostudies-literature

Practical Approach to Enhance Compatibility in Silicon/Graphite Composites to Enable High-Capacity Li-Ion Battery Anodes.

Project description:There is an urgent need to improve the energy density of Li-ion batteries to enable mass-market penetration of electric vehicles, grid-scale energy storage, and next-generation consumer electronics. Silicon-graphite composites are currently the most plausible anode material to overcome the capacity limit of graphite or poor cycling performance of silicon. One serious and unrecognized limitation to the use of the composite as an anode is the incompatibility of hydrophobic (natural) graphite with the hydrophilic Si, which adversely affects battery performance. Herein, we report a novel, practical approach to modify the graphite resulting in the formation of a hard carbon coating and graphene sheets that give rise to higher compatibility with Si nanoparticles in the composite. Electrochemical and battery testing of the composite (10 wt % Si) anode shows higher reversible capacity (10% at C/12 and 20% at C/2) than the composite with unmodified graphite reaching ∼600 mAh/g with 95% retention after 100 cycles. The enhanced battery performance is explained by the uniform distribution of Si nanoparticles at the modified graphite surface due to the presence of graphene conductive networks and a thin, oxygen-rich, amorphous carbon layer on the surface of graphite particles, as evidenced by transmission electron microscopy (TEM) images and X-ray photoelectron spectra (XPS). This work provides a new approach to prepare graphite compatible materials that can work with hydrophilic components other than silicon for various applications other than batteries.

| S-EPMC7860062 | biostudies-literature

Sequential Effect of Dual-Layered Hybrid Graphite Anodes on Electrode Utilization During Fast-Charging Li-Ion Batteries.

Project description:To recharge lithium-ion batteries quickly and safely while avoiding capacity loss and safety risks, a novel electrode design that minimizes cell polarization at a higher current is highly desired. This work presents a dual-layer electrode (DLE) technology via sequential coating of two different anode materials to minimize the overall electrode resistance upon fast charging. Electrochemical impedance spectroscopy and distribution of relaxation times analysis revealed the dynamic evolution of electrode impedances in synthetic graphite (SG) upon a change in the state of charge (SOC), whereas the natural graphite (NG) maintains its original impedance regardless of SOC variation. This disparity dictates the sequence of the NG and SG coating layers within the DLE, considering the temporal SOC gradient developed upon fast charging. Simulation and experimental results suggest that DLE positioning NG and SG on the top (second-layer) and bottom (first-layer), respectively, can effectively reduce the overall resistance at a 4 C-rate (15-min charging), demonstrating two times higher capacity retention (61.0%) over 200 cycles than its counterpart with reversal sequential coating, and is higher than single-layer electrodes using NG or NG/SG binary mixtures. Hence, this study can guide the combinatorial sequence for multi-layer coating of various active materials for a lower-resistivity, thick-electrode design.

| S-EPMC11336972 | biostudies-literature

Effective Measures of Thickness Evolution of the Solid Electrolyte Interphase of Graphite Anodes for Li-Ion Batteries.

Project description:Upon forming, the intensity or thickness of the solid electrolyte interphase (SEI) in a Li-ion battery (LIB) evolves to various states depending on the cell materials and operation conditions. Despite a crucial role in comprehending the behaviors of an LIB, its quantitative measure is far from satisfactory mainly because of the undue complexity of the concentration profiles of the comprising chemical species. Here, we calculate the depth profiles of atomic mole fractions of C and F and their ratio as RC/F = C/F of graphite anodes for LIBs in comparison to an X-ray photoelectron spectroscopy (XPS) experiment. To this end, we take a differential equation approach to dC/dt*, where t* is the reduced XPS etching time for depth. As a result, the respective analytical expression derived for C, F, and RC/F(t*) is verified to accurately account for the experiment. Moreover, we show that RC/F(t*) in the j state can be practically expressed in Rj(t*)≃αj(t*)1/γ+βj, where γ is a constant for a given anode. Based on this, we suggest ξj* = (αi + βi - βj)/αj as a measure of the SEI thickness evolution from the i to j state in terms of the cycle number. As an intriguing finding, the SEI thickness evolves up to about 3 times that of its initial state, beyond which it does not appear to grow any more.

| S-EPMC11008243 | biostudies-literature

Quantifying microstructural dynamics and electrochemical activity of graphite and silicon-graphite lithium ion battery anodes.

Project description:Despite numerous studies presenting advances in tomographic imaging and analysis of lithium ion batteries, graphite-based anodes have received little attention. Weak X-ray attenuation of graphite and, as a result, poor contrast between graphite and the other carbon-based components in an electrode pore space renders data analysis challenging. Here we demonstrate operando tomography of weakly attenuating electrodes during electrochemical (de)lithiation. We use propagation-based phase contrast tomography to facilitate the differentiation between weakly attenuating materials and apply digital volume correlation to capture the dynamics of the electrodes during operation. After validating that we can quantify the local electrochemical activity and microstructural changes throughout graphite electrodes, we apply our technique to graphite-silicon composite electrodes. We show that microstructural changes that occur during (de)lithiation of a pure graphite electrode are of the same order of magnitude as spatial inhomogeneities within it, while strain in composite electrodes is locally pronounced and introduces significant microstructural changes.

| S-EPMC5052642 | biostudies-literature

GeTe-TiC-C Composite Anodes for Li-Ion Storage.

Project description:Germanium boasts a high charge capacity, but it has detrimental effects on battery cycling life, owing to the significant volume expansion that it incurs after repeated recharging. Therefore, the fabrication of Ge composites including other elements is essential to overcome this hurdle. Herein, highly conductive Te is employed to prepare an alloy of germanium telluride (GeTe) with the addition of a highly conductive matrix comprising titanium carbide (TiC) and carbon (C) via high-energy ball milling (HEBM). The final alloy composite, GeTe-TiC-C, is used as a potential anode for lithium-ion cells. The GeTe-TiC-C composites having different combinations of TiC are characterized by electron microscopies and X-ray powder diffraction for structural and morphological analyses, which indicate that GeTe and TiC are evenly spread out in the carbon matrix. The GeTe electrode exhibits an unstable cycling life; however, the addition of higher amounts of TiC in GeTe offers much better electrochemical performance. Specifically, the GeTe-TiC (20%)-C and GeTe-TiC (30%)-C electrodes exhibited excellent reversible cyclability equivalent to 847 and 614 mAh g-1 after 400 cycles, respectively. Moreover, at 10 A g-1, stable capacity retentions of 78% for GeTe-TiC (20%)-C and 82% for GeTe-TiC (30%)-C were demonstrated. This proves that the developed GeTe-TiC-C anodes are promising for potential applications as anode candidates for high-performance lithium-ion batteries.

| S-EPMC7579072 | biostudies-literature

Data for an Advanced Microstructural and Electrochemical Datasheet on 18650 Li-ion Batteries with Nickel-Rich NMC811 Cathodes and Graphite-Silicon Anodes.

Project description:The data presented here were collected from a commercial LG Chem cylindrical INR18650 MJ1 lithium-ion (Li-ion) battery (approximate nominal specifications: 3.5 Ah, 3.6?V, 12.2?Wh). Electrochemical and microstructural information is presented, the latter collected across several length scales using X-ray computed tomography (CT): from cell to particle. One cell-level tomogram, four assembly-level and two electrode/particle-level 3D datasets are available; all data was collected in the pristine state. The electrochemical data consists of the full current and voltage charge-discharge curves for 400 operational cycles. All data has been made freely available via a repository [10.5522/04/c.4994651] in order to aid in the development of improved computational models for commercially-relevant Li-ion battery materials.

| S-EPMC7394852 | biostudies-literature

Improving the Cycling Performance of Lithium-Ion Battery Si/Graphite Anodes Using a Soluble Polyimide Binder.

Project description:Herein, we improved the performance of Si/graphite (Si/C) composite anodes by introducing a highly adhesive co-polyimide (P84) binder and investigated the relationship between their electrochemical and adhesion properties using the 90° peel test and a surface and interfacial cutting analysis system. Compared to those of conventional poly(vinylidene fluoride) (PVdF)-based electrodes, the cycling performance and rate capability of P84-based Si/C anodes were improved by 47.0% (372 vs 547 mAh g-1 after 100 cycles at a 60 mA g-1 discharge condition) and 33.4% (359 vs 479 mAh g-1 after 70 cycles at a 3.0 A g-1 discharge condition), respectively. Importantly, the P84-based electrodes exhibited less pronounced morphological changes and a smaller total cell resistance after cycling than the PVdF-based ones, also showing better interlayer adhesion (F mid) and interfacial adhesion to Cu current collectors (F inter).

| S-EPMC6645015 | biostudies-literature

Towards 3D-lithium ion microbatteries based on silicon/graphite blend anodes using a dispenser printing technique.

Project description:In this work we present for the first time high capacity silicon/carbon-graphite blend slurries designed for application in 3D-printed lithium ion microbatteries (3D-MLIBs). The correlation between electrochemical and rheological properties of the corresponding slurries was systematically investigated with the prospect of production by an automated dispensing process. A variation of the binder content (carboxymethyl cellulose/styrene-butadiene rubber, CMC/SBR) between 6 wt%, 12 wt%, 18 wt% and 24 wt% in the anode slurry proved to be crucial for the printing process. Regarding the rheological properties increasing binder content leads to increased viscosity and yield stress values promising printed structures with high aspect ratios. Consequently, interdigital 3D-printed micro anode structures with increasing aspect ratios were printed with increasing binder content. For printed 6-layer structures aspect ratios of 6.5 were achieved with anode slurries containing 24 wt% binder. Electrochemical results from planar coin cell measurements showed that anodes containing 12 wt% CMC/SBR binder content exhibited stable cycling at the highest charge capacities of 484 mA h g-1 at a current rate of C/4. Furthermore, at 4C the cells showed high capacity retention of 89% compared to cycling at C/4. Based on this study and the given material formulation we recommend 18 wt% CMC/SBR as the best trade-off between electrochemical and rheological properties for future work with fully 3D-printed MLIBs.

| S-EPMC9054581 | biostudies-literature

Balancing the Ion/Electron Transport of Graphite Anodes by a La-Doped TiNb<sub>2</sub>O<sub>7</sub> Functional Coating for Fast-Charging Li-Ion Batteries.

Project description:A functional coating layer (FCL) is widely applied in fast-charging lithium-ion batteries to improve the sluggish Li+ transport kinetics of traditional graphite anodes. However, blindly increasing the Li+ conductivity for FCL reduces the overall electron conductivity of the anodes. Herein, we decoupled the effect of La-doping on TiNb2O7 (TNO) in terms of the phase evolution, Li+/electron transport, and lithiation behavior, and then proposed a promising La0.1TNO FCL with balanced Li+/electron transport for a fast-charging graphite anode. By optimizing the doping concentration of La, more holes are introduced into the TNO as electron carriers without causing lattice distortion, thus maintaining the fast Li+ diffusion channel in TNO. As a result, the graphite with La0.1TNO FCL delivers an excellent capacity of 220.2 mAh g-1 (96.3% retention) after 450 cycles at 3 C, nearly twice that of the unmodified one.

| S-EPMC10979427 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data