Application of Various NDT Methods for the Evaluation of Building Steel Structures for Reuse.
Ontology highlight
ABSTRACT:
SUBMITTER: Fujita M
PROVIDER: S-EPMC5456005 | biostudies-other | 2014 Oct
REPOSITORIES: biostudies-other
Similar Datasets
Project description:The quality of steel rods used in structural applications has been subjected to continuous scrutiny by researchers in Nigeria. In this data article, the experimental data on the chemical and mechanical properties of steel rods from collapsed building sites and local steel plants have been reported. The chemical composition consisting of carbon, manganese, silicon, sulphur, phosphorus among other elements were recorded using an optical emission spectrometer. Some of the main elements were used to evaluate the carbon equivalent value and the results are reported in this article. The yield strength, ultimate tensile strength and percentage elongation were also presented as obtained from the universal testing machine. The hardness values of the steel rod samples were also presented.
| S-EPMC6240622 | biostudies-literature
Project description:The COVID-19 pandemic resulted in many supply chain issues, including crippling of essential personal protective equipment (PPE) needed for high-risk occupations such as those in healthcare. As a result of these supply chain issues, unprecedented crisis capacity strategies were implemented to divert PPE items such as filtering facepiece respirators (FFRs, namely N95s) to those who needed them most for protection. Large-scale methods for decontamination were used throughout the world to preserve these items and provided for their extended use. The general public also adopted the use of non-specialized protective equipment such as face coverings. So, the need for cleaning, decontamination, or disinfection of these items in addition to normal clothing items became a necessary reality. Some items could be laundered, but other items were not appropriate for washing/drying. To fill research gaps in small-scale, non-commercial cleaning and disinfection, this bench-scale research was conducted using small coupons (swatches) of multiple PPE/barrier protection materials inoculated with virus (non-pathogenic bacteriophages Phi6 and MS2) and tested against a range of decontamination methods including bleach-, alcohol- and quaternary ammonium compound (QAC)-based liquid sprays, as well as low concentration hydrogen peroxide vapor (LCHPV) and bench-scale laundering. In general, non-porous items were easier to disinfect than porous items, and the enveloped virus Phi6 was overall easier to inactivate than MS2. Multiple disinfection methods were shown to be effective in reducing viral loads from PPE coupons, though only laundering and LCHPV were effective for all materials tested that were inoculated with Phi6. Applications of this and follow-on full-scale research are to provide simple effective cleaning/disinfection methods for use during the current and future pandemics.
| S-EPMC10374148 | biostudies-literature
Project description:BackgroundQuantitative structure-activity relationship (QSAR) modeling is one of the most important computational tools employed in drug discovery and development. The external validation of QSAR models is the main point to check the reliability of developed models for the prediction activity of not yet synthesized compounds. It was performed by different criteria in the literature.MethodsIn this study, 44 reported QSAR models for biologically active compounds reported in scientific papers were collected. Various statistical parameters of external validation of a QSAR model were calculated, and the results were discussed.ResultsThe findings revealed that employing the coefficient of determination (r2) alone could not indicate the validity of a QSAR model. The established criteria for external validation have some advantages and disadvantages which should be considered in QSAR studies.ConclusionThis study showed that these methods alone are not only enough to indicate the validity/invalidity of a QSAR model.
| S-EPMC9396839 | biostudies-literature
Project description:Density functional theory (DFT) is a widely used computational method for predicting the physical and chemical properties of metals and organometals. As the number of electrons and orbitals in an atom increases, DFT calculations for actinide complexes become more demanding due to increased complexity. Moreover, reasonable levels of theory for calculating the structures of actinide complexes are not extensively studied. In this study, 38 calculations, based on various combinations, were performed on molecules containing two representative actinides to determine the optimal combination for predicting the geometries of actinide complexes. Among the 38 calculations, four optimal combinations were identified and compared with experimental data. The optimal combinations were applied to a more complicated and practical actinide compound, the uranyl complex (UO2(2,2'-(1E,1'E)-(2,2-dimethylpropane-1,3-dyl)bis(azanylylidene)(CH3OH)), for further confirmation. The corresponding optimal calculation combination provides a reasonable level of theory for accurately optimizing the structure of actinide complexes using DFT.
| S-EPMC8911565 | biostudies-literature
Project description:In this review, applications of various molecular modelling methods in the study of estrogens and xenoestrogens are summarized. Selected biomolecules that are the most commonly chosen as molecular modelling objects in this field are presented. In most of the reviewed works, ligand docking using solely force field methods was performed, employing various molecular targets involved in metabolism and action of estrogens. Other molecular modelling methods such as molecular dynamics and combined quantum mechanics with molecular mechanics have also been successfully used to predict the properties of estrogens and xenoestrogens. Among published works, a great number also focused on the application of different types of quantitative structure-activity relationship (QSAR) analyses to examine estrogen's structures and activities. Although the interactions between estrogens and xenoestrogens with various proteins are the most commonly studied, other aspects such as penetration of estrogens through lipid bilayers or their ability to adsorb on different materials are also explored using theoretical calculations. Apart from molecular mechanics and statistical methods, quantum mechanics calculations are also employed in the studies of estrogens and xenoestrogens. Their applications include computation of spectroscopic properties, both vibrational and Nuclear Magnetic Resonance (NMR), and also in quantum molecular dynamics simulations and crystal structure prediction. The main aim of this review is to present the great potential and versatility of various molecular modelling methods in the studies on estrogens and xenoestrogens.
| S-EPMC7504198 | biostudies-literature
Project description:BackgroundManagers and professionals in health and social care are required to implement evidence-based methods. Despite this, they generally lack training in implementation. In clinical settings, implementation is often a team effort, so it calls for team training. The aim of this study was to evaluate the effects of the Building Implementation Capacity (BIC) intervention that targets teams of professionals, including their managers.MethodsA non-randomized design was used, with two intervention cases (each consisting of two groups). The longitudinal, mixed-methods evaluation included pre-post and workshop-evaluation questionnaires, and interviews following Kirkpatrick's four-level evaluation framework. The intervention was delivered in five workshops, using a systematic implementation method with exercises and practical working materials. To improve transfer of training, the teams' managers were included. Practical experiences were combined with theoretical knowledge, social interactions, reflections, and peer support.ResultsOverall, the participants were satisfied with the intervention (first level), and all groups increased their self-rated implementation knowledge (second level). The qualitative results indicated that most participants applied what they had learned by enacting new implementation behaviors (third level). However, they only partially applied the implementation method, as they did not use the planned systematic approach. A few changes in organizational results occurred (fourth level).ConclusionsThe intervention had positive effects with regard to the first two levels of the evaluation model; that is, the participants were satisfied with the intervention and improved their knowledge and skills. Some positive changes also occurred on the third level (behaviors) and fourth level (organizational results), but these were not as clear as the results for the first two levels. This highlights the fact that further optimization is needed to improve transfer of training when building teams' implementation capacity. In addition to considering the design of such interventions, the organizational context and the participants' characteristics may also need to be considered to maximize the chances that the learned skills will be successfully transferred to behaviors.
| S-EPMC6505288 | biostudies-literature
Project description:In this paper, we develop a spatio-temporal modeling approach to describe blood and drug flow, as well as drug uptake and elimination, on an approximation of the liver. Extending on previously developed computational approaches, we generate an approximation of a liver, which consists of a portal and hepatic vein vasculature structure, embedded in the surrounding liver tissue. The vasculature is generated via constrained constructive optimization, and then converted to a spatial grid of a selected grid size. Estimates for surrounding upscaled lobule tissue properties are then presented appropriate to the same grid size. Simulation of fluid flow and drug metabolism (hepatic clearance) are completed using discretized forms of the relevant convective-diffusive-reactive partial differential equations for these processes. This results in a single stage, uniformly consistent method to simulate equations for blood and drug flow, as well as drug metabolism, on a 3D structure representative of a liver.
| S-EPMC5029923 | biostudies-literature
Project description:Previous research has indicated that many European buildings are vulnerable to moderate-magnitude earthquakes. For example, during the L´Aquila (Italia, Mw 6.3, 2009) and Lorca (Spain, Mw 5.9, 2011) earthquakes, many old buildings were severely damaged and some of them collapsed. In specific, significant damage has been found in several school buildings after past earthquakes in Europe. This is due to the fact that many of them were constructed prior to the current seismic codes, thus considering only gravitational loads and with no seismic design whatsoever. Primary schools are even more vulnerable than other typologies because of their low adult/child ratio. The seismic activity of the Iberian Peninsula is low-moderate. However, the Algarve and Huelva regions, which are situated in the south-west, are influenced by large faults which have caused major earthquakes of long-return periods. The European project PERSISTAH (Projetos de Escolas Resilientes aos SISmos no Território do Algarve e de Huelva, in Portuguese) aims to cooperatively evaluate the seismic vulnerability of primary schools in the Algarve (Portugal) and Huelva (Spain) regions. The present work is framed under this project. The objective of this paper is to determine the most effective retrofitting scheme for a typical primary school building in this area, considering structural, architectural and constructive parameters. The scheme could be applied to several buildings of the same typology, decreasing costs and time. An existing reinforced concrete frame building has been selected for the study. This is one of the most commonly used typologies for primary schools in this area. A nonlinear static analysis has been carried out in order to study its seismic behaviour. The performance point of the building has been obtained through the capacity-demand spectrum method. The preliminary results have confirmed the poor seismic behaviour of this building. Specifically, soft-story behaviour has been identified in the ground floor and short columns have been observed in the upper floors. Therefore, specific seismic retrofitting solutions have been proposed and evaluated in order to identify the one that is the most efficient. The combination of reinforcements has been done considering the structural and architectural impact and constructive parameters. The calculations have shown that steel X-bracings are the best solution for preventing the formation of a soft-storey in the ground floor. Unfortunately, this scheme increases the deformation in the upper floor columns. The best solution for the upper floors' short columns has been the use of steel jackets. The results have also shown that this combination produces an important reduction of the expected general damage level. The resulting retrofitting scheme can be extrapolated to other buildings with a similar typology.
| S-EPMC7485823 | biostudies-literature
Project description:BackgroundSeveral attempts have been made to determine HIV-1 resistance from genotype resistance testing. We compare scoring methods for building weighted genotyping scores and commonly used systems to determine whether the virus of a HIV-infected patient is resistant.Methods and principal findingsThree statistical methods (linear discriminant analysis, support vector machine and logistic regression) are used to determine the weight of mutations involved in HIV resistance. We compared these weighted scores with known interpretation systems (ANRS, REGA and Stanford HIV-db) to classify patients as resistant or not. Our methodology is illustrated on the Forum for Collaborative HIV Research didanosine database (N = 1453). The database was divided into four samples according to the country of enrolment (France, USA/Canada, Italy and Spain/UK/Switzerland). The total sample and the four country-based samples allow external validation (one sample is used to estimate a score and the other samples are used to validate it). We used the observed precision to compare the performance of newly derived scores with other interpretation systems. Our results show that newly derived scores performed better than or similar to existing interpretation systems, even with external validation sets. No difference was found between the three methods investigated. Our analysis identified four new mutations associated with didanosine resistance: D123S, Q207K, H208Y and K223Q.ConclusionsWe explored the potential of three statistical methods to construct weighted scores for didanosine resistance. Our proposed scores performed at least as well as already existing interpretation systems and previously unrecognized didanosine-resistance associated mutations were identified. This approach could be used for building scores of genotypic resistance to other antiretroviral drugs.
| S-EPMC3605419 | biostudies-literature
Project description:Human noroviruses are major etiologic agents of epidemic gastroenteritis. Outbreaks are often accompanied by contamination of environmental surfaces, but since these viruses cannot be routinely propagated in laboratory cultures, their response to surface disinfectants is predicted by using surrogates, such as murine norovirus 1 (MNV-1). This study compared the virucidal efficacies of various liquid treatments (three sanitizer liquids, 5% levulinic acid plus 2% SDS [LEV/SDS], 200 ppm chlorine, and an isopropanol-based quaternary ammonium compound [Alpet D2], and two control liquids, sterile tap water and sterile tap water plus 2% SDS) when delivered to MNV-1-inoculated stainless steel surfaces by conventional hydraulic or air-assisted, induction-charged (AAIC) electrostatic spraying or by wiping with impregnated towelettes. For the spray treatments, LEV/SDS proved effective when applied with hydraulic and AAIC electrostatic spraying, providing virus reductions of 2.71 and 1.66 log PFU/ml, respectively. Alpet D2 provided a 2.23-log PFU/ml reduction with hydraulic spraying, outperforming chlorine (1.16-log PFU/ml reduction). Chlorine and LEV/SDS were equally effective as wipes, reducing the viral load by 7.05 log PFU/ml. Controls reduced the viral load by <1 log with spraying applications and by >3 log PFU/ml with wiping. Results indicated that both sanitizer type and application methods should be carefully considered when choosing a surface disinfectant to best prevent and control environmental contamination by noroviruses.
| S-EPMC3568589 | biostudies-literature