Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Decomposition of Cyclohexane on Ni₃Al Thin Foil Intermetallic Catalyst.

ABSTRACT: Micro-grained thin foils made of Ni₃Al intermetallic alloy were fabricated, according to a previously described procedure, and tested as catalyst for decomposition of cyclohexane. The conversion efficiency of the catalyst was evaluated in a synthetic air atmosphere, and found to be as high as 98.7% ± 1.0% at 600 °C and 86.7% ± 3.6% at 500 °C. During the reaction, the growth of carbon nanofibers on the catalysts surface was observed. The chemical and phase composition of the nanofibers was investigated with scanning electron microscopy (SEM), energy dispersive spectrometry (EDS) and X-ray diffraction (XRD), finding them to be made of graphitic carbon. Additionally, nanoparticles of nickel appear to be incorporated in the fibers. The obtained material is promising for large scale fabrication in industrial applications because of its high efficiency in the hydrocarbon decomposition, the simple fabrication procedure, and the form of self-supporting foils with the presence of additional carbon nanofibers that increase its efficiency.

SUBMITTER: Jozwik P

PROVIDER: S-EPMC5456010 | biostudies-other | 2014 Oct

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Effects of Catalyst Pretreatment on Carbon Nanotube Synthesis from Methane Using Thin Stainless-Steel Foil as Catalyst by Chemical Vapor Deposition Method.

Project description:Synthesis of carbon nanotubes (CNTs) was carried out using methane as a carbon source via the chemical vapor deposition (CVD) method. A thin stainless-steel foil was used as catalyst for CNT growth. Our results revealed that pretreatment step of the stainless-steel foil as a catalyst plays an important role in CNT formation. In our experiments, a catalyst pretreatment temperature of 850 °C or 950 °C was found to facilitate the creation of Fe- and Cr-rich particles are active sites on the foil surface, leading to CNT formation. It is noted that the size of metallic particles after pretreatment is closely related to the diameter of the synthesized CNTs. It is interesting that a shorter catalyst pretreatment brings the growth of semiconducting typed CNTs while a longer pretreatment creates metallic CNTs. This finding might lead to a process for improving the quality of CNTs grown on steel foil as catalyst.

| S-EPMC7824306 | biostudies-literature

Co-Precipitated Ni-Mg-Al Hydrotalcite-Derived Catalyst Promoted with Vanadium for CO2 Methanation.

Project description:Co-precipitated Ni-Mg-Al hydrotalcite-derived catalyst promoted with vanadium were synthesized with different V loadings (0-4 wt%) and studied in CO2 methanation. The promotion with V significantly changes textural properties (specific surface area and mesoporosity) and improves the dispersion of nickel. Moreover, the vanadium promotion strongly influences the surface basicity by increasing the total number of basic sites. An optimal loading of 2 wt% leads to the highest activity in CO2 methanation, which is directly correlated with specific surface area, as well as the basic properties of the studied catalysts.

| S-EPMC8588090 | biostudies-literature

Tuning methane decomposition on stepped Ni surface: The role of subsurface atoms in catalyst design.

Project description:The decomposition of methane (CH4) is a catalytically important reaction in the production of syngas that is used to make a wide spectrum of hydrocarbons and alcohols, and a principal carbon deposition pathway in methane reforming. Literatures suggest that stepped Ni surface is uniquely selective toward methane decomposition to atomic C, contrary to other catalysts that favor the CH fragment. In this paper, we used dispersion-corrected density functional theory-based first principles calculations to identify the electronic factors that govern this interesting property of stepped Ni surface. We found that the adsorption of atomic C on this surface is uniquely characterized by a 5-coordinated bonding of C with Ni atoms from both the surface and subsurface layers. Comparison with Ru surface indicates the importance of the subsurface atoms of stepped Ni surface on its selectivity toward methane decomposition to atomic C. Interestingly, we found that substituting these subsurface atoms with other elements can dramatically change the reaction mechanism of methane decomposition, suggesting a new approach to catalyst design for hydrocarbon reforming applications.

| S-EPMC5656674 | biostudies-literature

Tandem catalyzing the hydrodeoxygenation of 5-hydroxymethylfurfural over a Ni<sub>3</sub>Fe intermetallic supported Pt single-atom site catalyst.

Project description:Single-atom site catalysts (SACs) have been used in multitudinous reactions delivering ultrahigh atom utilization and enhanced performance, but it is challenging for one single atom site to catalyze an intricate tandem reaction needing different reactive sites. Herein, we report a robust SAC with dual reactive sites of isolated Pt single atoms and the Ni3Fe intermetallic support (Pt1/Ni3Fe IMC) for tandem catalyzing the hydrodeoxygenation of 5-hydroxymethylfurfural (5-HMF). It delivers a high catalytic performance with 99.0% 5-HMF conversion in 30 min and a 2, 5-dimethylfuran (DMF) yield of 98.1% in 90 min at a low reaction temperature of 160 °C, as well as good recyclability. These results place Pt1/Ni3Fe IMC among the most active catalysts for the 5-HMF hydrodeoxygenation reaction reported to date. Rational control experiments and first-principles calculations confirm that Pt1/Ni3Fe IMC can readily facilitate the hydrodeoxygenation reaction by a tandem mechanism, where the single Pt site accounts for C[double bond, length as m-dash]O group hydrogenation and the Ni3Fe interface promotes the C-OH bond cleavage. This interfacial tandem catalysis over the Pt single-atom site and Ni3Fe IMC support may develop new opportunities for the rational structural design of SACs applied in other heterogeneous tandem reactions.

| S-EPMC8179463 | biostudies-literature

Ni-Al-Cr superalloy as high temperature cathode current collector for advanced thin film Li batteries.

Project description:To obtain full advantage of state-of-the-art solid-state lithium-based batteries, produced by sequential deposition of high voltage cathodes and promising oxide-based electrolytes, the current collector must withstand high temperatures (>600 °C) in oxygen atmosphere. This imposes severe restrictions on the choice of materials for the first layer, usually the cathode current collector. It not only must be electrochemically stable at high voltage, but also remain conductive upon deposition and annealing of the subsequent layers without presenting a strong diffusion of its constituent elements into the cathode. A novel cathode current collector based on a Ni-Al-Cr superalloy with target composition Ni0.72Al0.18Cr0.10 is presented here. The suitability of this superalloy as a high voltage current collector was verified by determining its electrochemical stability at high voltage by crystallizing and cycling of LiCoO2 directly onto it.

| S-EPMC9080811 | biostudies-literature

Role of disorder when upscaling magnetocaloric Ni-Co-Mn-Al Heusler alloys from thin films to ribbons.

Project description:Research in functional magnetic materials often employs thin films as model systems for finding new chemical compositions with promising properties. However, the scale-up of thin films towards bulk-like structures is challenging, since the material synthesis conditions are entirely different for thin films and e.g. rapid quenching methods. As one of the consequences, the type and degree of order in thin films and melt-spun ribbons are usually different, leading to different magnetic properties. In this work, using the example of magnetocaloric Ni-Co-Mn-Al melt-spun ribbons and thin films, we show that the excellent functional properties of the films can be reproduced also in ribbons, if an appropriate heat treatment is applied, that installs the right degree of order in the ribbons. We show that some chemical disorder is needed to get a pronounced and sharp martensitic transition. Increasing the order with annealing improves the magnetic properties only up to a point where selected types of disorder survive, which in turn compromise the magnetic properties. These findings allow us to understand the impact of the type and degree of disorder on the functional properties, paving the way for a faster transfer of combinatorial thin film research towards bulk-like materials for magnetic Heusler alloys.

| S-EPMC6002362 | biostudies-literature

Boosted acceleration of protons by tailored ultra-thin foil targets.

Project description:We report on a detailed experimental and numerical study on the boosted acceleration of protons from ultra-thin hemispherical targets utilizing multi-Joule short-pulse laser-systems. For a laser intensity of 1?×?1020?W/cm2 and an on-target energy of only 1.3?J with this setup a proton cut-off energy of 8.5?MeV was achieved, which is a factor of 1.8 higher compared to a flat foil target of the same thickness. While a boost of the acceleration process by additionally injected electrons was observed for sophisticated targets at high-energy laser-systems before, our studies reveal that the process can be utilized over at least two orders of magnitude in intensity and is therefore suitable for a large number of nowadays existing laser-systems. We retrieved a cut-off energy of about 6.5?MeV of proton energy per Joule of incident laser energy, which is a noticeable enhancement with respect to previous results employing this mechanism. The approach presented here has the advantage of using structure-wise simple targets and being sustainable for numerous applications and high repetition rate demands at the same time.

| S-EPMC6904736 | biostudies-literature

Nucleation and growth of TiAl<sub>3</sub> intermetallic phase in diffusion bonded Ti/Al Metal Intermetallic Laminate.

Project description:A novel nucleation and growth phenomenon for TiAl3 intermetallic phase in Ti/Al diffusion couple is proposed based on diffusion kinetics. The interdiffusion and intrinsic diffusion co-efficients are calculated to make evident of dominant diffusion of Al towards Ti in Ti/Al diffusion couple obtained by solid state diffusion bonding. It was surprising to observe that the diffusion rate of Al was around 20 times higher than Ti with the formation of Kirkendall pores near the Al/TiAl3 interface. With such dominant diffusion of Al towards Ti, the nucleation and growth of TiAl3 intermetallic phase in Ti/Al couple happens mainly at the Ti/TiAl3 interface rather than Al/TiAl3 interface which is evident by the presence of very fine nearly nano-sized TiAl3 nuclei/grains near the Ti/TiAl3 interface. Even though the intermetallic phase is expected to nucleate at Al/TiAl3 interface, the relatively larger TiAl3 grains near that interface depicts grain growth with minimal nucleation. The theoretical calculations on diffusion parameters are in accordance with experimental observations of TiAl3 intermetallic growth phenomenon in Ti/Al system.

| S-EPMC6235842 | biostudies-literature

Growth kinetics of white graphene (h-BN) on a planarised Ni foil surface.

Project description:The morphology of the surface and the grain orientation of metal catalysts have been considered to be two important factors for the growth of white graphene (h-BN) by chemical vapour deposition (CVD). We report a correlation between the growth rate of h-BN and the orientation of the nickel grains. The surface of the nickel (Ni) foil was first polished by electrochemical polishing (ECP) and subsequently annealed in hydrogen at atmospheric pressure to suppress the effect of the surface morphology. Atmospheric annealing with hydrogen reduced the nucleation sites of h-BN, which induced a large crystal size mainly grown from the grain boundary with few other nucleation sites in the Ni foil. A higher growth rate was observed from the Ni grains that had the {110} or {100} orientation due to their higher surface energy.

| S-EPMC4496663 | biostudies-literature

Interdiffusion and Intermetallic Compounds at Al/Cu Interfaces in Al-50vol.%Cu Composite Prepared by Solid-State Sintering.

Project description:Al-Cu composites have attracted significant interest recently owing to their lightweight nature and remarkable thermal properties. Understanding the interdiffusion mechanism at the numerous Al/Cu interfaces is crucial to obtain Al-Cu composites with high thermal conductivities. The present study systematically investigates the interdiffusion mechanism at Al/Cu interfaces in relation to the process temperature. Al-50vol.%Cu composite powder, where Cu particles were encapsulated in a matrix of irregular Al particles, was prepared and then sintered at various temperatures from 340 to 500 °C. Intermetallic compounds (ICs) such as CuAl2 and Cu9Al4 were formed at the Al/Cu interfaces during sintering. Microstructural analysis showed that the thickness of the interdiffusion layer, which comprised the CuAl2 and Cu9Al4 ICs, drastically increased above 400 °C. The Vickers hardness of the Al-50vol.%Cu composite sintered at 380 °C was 79 HV, which was 1.5 times that of the value estimated by the rule of mixtures. A high thermal conductivity of 150 W∙m-1∙K-1 was simultaneously obtained. This result suggests that the Al-50vol.%Cu composite material with large number of Al/Cu interfaces, as well as good mechanical strength and heat conductance, can be prepared by solid-state sintering at a low temperature.

| S-EPMC8347343 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data