Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Ferroelectric Switching of Vinylidene and Trifluoroethylene Copolymer Thin Films on Au Electrodes Modified with Self-Assembled Monolayers.

ABSTRACT: The ferroelectric switching characteristics of a vinylidene fluoride and trifluoroethylene copolymer were significantly changed via the chemical modification of a gold electrode with an alkanethiol self-assembled monolayer (SAM). The alkanethiol SAM-Au electrode successfully suppressed the leakage current (dark current) from the electrode to the bulk ferroelectric. Smaller leakage currents led to the formation of an effective electric field in the bulk ferroelectric. At switching cycles ranging from 10 to 100 kHz, significant changes in the ferroelectric properties were observed. At 100 kHz, a remanent polarization (Pr) of 68 mC·m-² was measured, whereas a very small Pr value of 2.4 mC·m-² was measured for the sample without a SAM. The switching speed of the SAM-Au electrode is as twice as fast as that of the unmodified electrode. A large potential barrier was formed via the insertion of a SAM between the Au electrode and the ferroelectric, effectively changing the ferroelectric switching characteristics.

SUBMITTER: Tsutsumi N

PROVIDER: S-EPMC5456128 | biostudies-other | 2014 Sep

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Self-Assembled Copolymer Adsorption Layer-Induced Block Copolymer Nanostructures in Thin Films.

Project description:In polymer thin films, the bottom polymer chains are irreversibly adsorbed onto the substrates creating an ultrathin layer. Although this thin layer (only a few nanometers thick) governs all film properties, an understanding of this adsorbed layer remains elusive, and thus, its effective control has yet to be achieved, particularly in block copolymer (BCP) thin films. Herein, we employ self-assembled copolymer adsorption layers (SCALs), transferred from the air/water interfacial self-assembly of BCPs, as an effective control of the adsorbed layer in BCP thin films. SCALs replace the natural adsorbed layer, irreversibly adsorbing onto the substrates when other BCP is additionally coated on the SCALs. We further show that SCALs guide the thin film nanostructures because they provide topological restrictions and enthalpic/entropic preferences for a BCP self-assembly. The SCAL-induced self-assembly enables unprecedented control of nanostructures, creating novel nanopatterns such as spacing-controlled hole/dot patterns, dotted-line patterns, dash-line patterns, and anisotropic cluster patterns with exceptional controllability.

| S-EPMC6764160 | biostudies-literature

Universal ferroelectric switching dynamics of vinylidene fluoride-trifluoroethylene copolymer films.

Project description:In this work, switching dynamics of poly(vinylidene fluoride-trifluoroethylene) [P(VDF-TrFE)] copolymer films are investigated over unprecedentedly wide ranges of temperature and electric field. Remarkably, domain switching of copolymer films obeys well the classical domain nucleation and growth model although the origin of ferroelectricity in organic ferroelectric materials inherently differs from the inorganic counterparts. A lower coercivity limit of 50 MV/m and 180° domain wall energy of 60 mJ/m(2) are determined for P(VDF-TrFE) films. Furthermore, we discover in copolymer films an anomalous temperature-dependent crossover behavior between two power-law scaling regimes of frequency-dependent coercivity, which is attributed to the transition between flow and creep motions of domain walls. Our observations shed new light on the switching dynamics of semi-crystalline ferroelectric polymers, and such understandings are critical for realizing their reliable applications.

| S-EPMC3998015 | biostudies-other

Kinetic control of tunable multi-state switching in ferroelectric thin films.

Project description:Deterministic creation of multiple ferroelectric states with intermediate values of polarization remains challenging due to the inherent bi-stability of ferroelectric switching. Here we show the ability to select any desired intermediate polarization value via control of the switching pathway in (111)-oriented PbZr0.2Ti0.8O3 films. Such switching phenomena are driven by kinetic control of the volume fraction of two geometrically different domain structures which are generated by two distinct switching pathways: one direct, bipolar-like switching and another multi-step switching process with the formation of a thermodynamically-stable intermediate twinning structure. Such control of switching pathways is enabled by the competition between elastic and electrostatic energies which favors different types of ferroelastic switching that can occur. Overall, our work demonstrates an alternative approach that transcends the inherent bi-stability of ferroelectrics to create non-volatile, deterministic, and repeatedly obtainable multi-state polarization without compromising other important properties, and holds promise for non-volatile multi-state functional applications.

| S-EPMC6427024 | biostudies-literature

Improving the Switching Capacity of Glyco-Self-Assembled Monolayers on Au(111).

Project description:Self-assembled monolayers (SAMs) decorated with photoisomerizable azobenzene glycosides are useful tools for investigating the effect of ligand orientation on carbohydrate recognition. However, photoswitching of SAMs between two specific states is characterized by a limited capacity. The goal of this study is the improvement of photoswitchable azobenzene glyco-SAMs. Different concepts, in particular self-dilution and rigid biaryl backbones, have been investigated. The required SH-functionalized azobenzene glycoconjugates were synthesized through a modular approach, and the respective glyco-SAMs were fabricated on Au(111). Their photoswitching properties have been extensively investigated by applying a powerful set of methods (IRRAS, XPS, and NEXAFS). Indeed, the combination of tailor-made biaryl-azobenzene glycosides and suitable diluent molecules led to photoswitchable glyco-SAMs with a significantly enhanced and unprecedented switching capacity.

| S-EPMC6973251 | biostudies-literature

Boosting Polarization Switching-Induced Current Injection by Mechanical Force in Ferroelectric Thin Films.

Project description:When scaling the lateral size of a ferroelectric random access memory (FeRAM) device down to the nanometer range, the polarization switching-induced displacement current becomes small and challenging to detect, which greatly limits the storage density of FeRAM. Here, we report the observation of significantly enhanced injection currents, much larger than typical switching currents, induced by polarization switching in BiFeO3 thin films via conductive atomic force microscopy. Interestingly, this injected current can be effectively modulated by applying mechanical force. As the loading force increases from ∼50 to ∼750 nN, the magnitude of the injected current increases and the critical voltage to trigger the current injection decreases. Notably, changing the loading force by an order of magnitude increases the peak current by 2-3 orders of magnitude. The mechanically boosted injected current could be useful for the development of high-density FeRAM devices. The mechanical modulation of the injected current may be attributed to the mechanical force-induced changes in the barrier height and interfacial layer width.

| S-EPMC8289170 | biostudies-literature

Microwave-accelerated surface modification of plasmonic gold thin films with self-assembled monolayers of alkanethiols.

Project description:A rapid surface modification technique for the formation of self-assembled monolayers (SAMs) of alkanethiols on gold thin films using microwave heating in <10 min is reported. In this regard, SAMs of two model alkanethiols, 11-mercaptoundecanoic acid (11-MUDA, to generate a hydrophilic surface) and undecanethiol (UDET, a hydrophobic surface), were successfully formed on gold thin films using selective microwave heating in (1) a semicontinuous fashion and (2) a continuous fashion at room temperature (24 h, control experiment, no microwave heating). The formation of SAMs of 11-MUDA and UDET was confirmed by contact angle measurements, Fourier transform infrared (FT-IR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). The contact angles for water on SAMs formed by the selective microwave heating and conventional room temperature incubation technique (24 h) were measured to be similar for 11-MUDA and UDET. FT-IR spectroscopy results confirmed that the internal structures of SAMs prepared using both microwave heating and room temperature were similar. XPS results revealed that the organic and sulfate contaminants found on bare gold thin films were replaced by SAMs after the surface modification process had been conducted using both microwave heating and room temperature.

| S-EPMC3863588 | biostudies-literature

Solution-processed transparent ferroelectric nylon thin films.

Project description:Ferroelectricity, a bistable ordering of electrical dipoles in a material, is widely used in sensors, actuators, nonlinear optics, and data storage. Traditional ferroelectrics are ceramic based. Ferroelectric polymers are inexpensive lead-free materials that offer unique features such as the freedom of design enabled by chemistry, the facile solution-based low-temperature processing, and mechanical flexibility. Among engineering polymers, odd nylons are ferroelectric. Since the discovery of ferroelectricity in polymers, nearly half a century ago, a solution-processed ferroelectric nylon thin film has not been demonstrated because of the strong tendency of nylon chains to form hydrogen bonds. We show the solution processing of transparent ferroelectric thin film capacitors of odd nylons. The demonstration of ferroelectricity, as well as the way to obtain thin films, makes odd nylons attractive for applications in flexible devices, soft robotics, biomedical devices, and electronic textiles.

| S-EPMC6697430 | biostudies-literature

Non-ohmic behavior and resistive switching of Au cluster-assembled films beyond the percolation threshold.

Project description:Networks based on nanoscale resistive switching junctions are considered promising for the fabrication of neuromorphic computing architectures. To date random networks of nanowires, nanoparticles, and metal clusters embedded in a polymeric matrix or passivated by shell of ligands or oxide layers have been used to produce resistive switching systems. The strategies applied to tailor resistive switching behavior are currently based on the careful control of the volume fraction of the nanoscale conducting phase that must be fixed close to the electrical percolation threshold. Here, by blending laboratory and computer experiments, we demonstrate that metallic nanostructured Au films fabricated by bare gold nanoparticles produced in the gas phase and with thickness well beyond the electrical percolation threshold, show a non-ohmic electrical behavior and complex and reproducible resistive switching. We observe that the nanogranular structure of the Au films does not evolve with thickness: this introduces a huge number of defects and junctions affecting the electrical transport and causing a dynamic evolution of the nanoscale electrical contacts under the current flow. To uncover the origin of the resistive switching behavior in Au cluster-assembled films, we developed a simple computational model for determining the evolution of a model granular film under bias conditions. The model exploits the information provided by experimental investigation about the nanoscale granular morphology of real films. Our results show that metallic nanogranular materials have functional properties radically different from their bulk counterparts, in particular nanostructured Au films can be fabricated by assembling bare gold clusters which retain their individuality to produce an all-metal resistive switching system.

| S-EPMC9417734 | biostudies-literature

High refractive index in low metal content nanoplasmonic surfaces from self-assembled block copolymer thin films.

Project description:Materials with a high and tunable refractive index are attractive for nanophotonic applications. In this contribution, we propose a straightforward fabrication technique of high-refractive index surfaces based on self-assembled nanostructured block copolymer thin films. The selective and customizable metal incorporation within out-of-plane polymer lamellae produces azimuthally isotropic metallic nanostructures of defined geometries, which were analysed using microscopy and small-angle X-ray scattering techniques. Variable-angle spectroscopic ellipsometry was used to relate the geometrical parameters of the metallic features and the resulting refractive index of the patterned surfaces. In particular, nanostructured gold patterns with a high degree of homogeneity and a gold content as low as 16 vol% reach a refractive index value of more than 3 in the visible domain. Our study thus demonstrates a new route for the preparation of high refractive index surfaces with a low metal content for optical applications.

| S-EPMC9473184 | biostudies-literature

Square wave voltammetry of TNT at gold electrodes modified with self-assembled monolayers containing aromatic structures.

Project description:Square wave voltammetry for the reduction of 2,4,6-trinitrotoluene (TNT) was measured in 100 mM potassium phosphate buffer (pH 8) at gold electrodes modified with self-assembled monolayers (SAMs) containing either an alkane thiol or aromatic ring thiol structures. At 15 Hz, the electrochemical sensitivity (µA/ppm) was similar for all SAMs tested. However, at 60 Hz, the SAMs containing aromatic structures had a greater sensitivity than the alkane thiol SAM. In fact, the alkane thiol SAM had a decrease in sensitivity at the higher frequency. When comparing the electrochemical response between simulations and experimental data, a general trend was observed in which most of the SAMs had similar heterogeneous rate constants within experimental error for the reduction of TNT. This most likely describes a rate limiting step for the reduction of TNT. However, in the case of the alkane SAM at higher frequency, the decrease in sensitivity suggests that the rate limiting step in this case may be electron tunneling through the SAM. Our results show that SAMs containing aromatic rings increased the sensitivity for the reduction of TNT when higher frequencies were employed and at the same time suppressed the electrochemical reduction of dissolved oxygen.

| S-EPMC4280194 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data