Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Microstructural Analysis and Rheological Modeling of Asphalt Mixtures Containing Recycled Asphalt Materials.

ABSTRACT: The use of recycled materials in pavement construction has seen, over the years, a significant increase closely associated with substantial economic and environmental benefits. During the past decades, many transportation agencies have evaluated the effect of adding Reclaimed Asphalt Pavement (RAP), and, more recently, Recycled Asphalt Shingles (RAS) on the performance of asphalt pavement, while limits were proposed on the amount of recycled materials which can be used. In this paper, the effect of adding RAP and RAS on the microstructural and low temperature properties of asphalt mixtures is investigated using digital image processing (DIP) and modeling of rheological data obtained with the Bending Beam Rheometer (BBR). Detailed information on the internal microstructure of asphalt mixtures is acquired based on digital images of small beam specimens and numerical estimations of spatial correlation functions. It is found that RAP increases the autocorrelation length (ACL) of the spatial distribution of aggregates, asphalt mastic and air voids phases, while an opposite trend is observed when RAS is included. Analogical and semi empirical models are used to back-calculate binder creep stiffness from mixture experimental data. Differences between back-calculated results and experimental data suggest limited or partial blending between new and aged binder.

SUBMITTER: Falchetto AC

PROVIDER: S-EPMC5456137 | biostudies-other | 2014 Sep

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

A study on the rheological properties of recycled rubber-modified asphalt mixtures.

Project description:Using waste rubber in asphalt mixes has become a common practice in road construction. This paper presents the results of a study on the rheological characteristics of rubber-modified asphalt (RMA) concrete under static and dynamic loading conditions. A number of static and dynamic creep tests were conducted on RMA mix specimens with different rubber sizes and contents, and a series of resonant column tests were conducted to evaluate the shear modulus and damping values. To simulate the stress-strain response of traffic-induced loading, the measurements were taken for different confining pressures and strain levels. The results of the study indicated that rubber modification increases stiffness and damping ratio, making it a very attractive material for use in road construction. However the grain size of the rubber is very important. Although RMA may cost up to 100% more than regular asphalt, the advantages it brings, such as an increased service life of the road and proper waste utilization contributing to a more sustainable infrastructure, may justify the added cost.

| S-EPMC4322666 | biostudies-other

Microstructural Modeling of Rheological Mechanical Response for Asphalt Mixture Using an Image-Based Finite Element Approach.

Project description:In this paper, an image-based micromechanical model for an asphalt mixture's rheological mechanical response is introduced. Detailed information on finite element (FE) modeling based on X-ray computed tomography (X-ray CT) is presented. An improved morphological multiscale algorithm was developed to segment the adhesive coarse aggregate images. A classification method to recognize the different classifications of the elemental area for a confining pressure purpose is proposed in this study. Then, the numerical viscoelastic constitutive formulation of asphalt mortar in an FE code was implemented using the simulation software ABAQUS user material subroutine (UMAT). To avoid complex experiments in determining the time-dependent Poisson's ratio directly, numerous attempts were made to indirectly obtain all material properties in the viscoelastic constitutive model. Finally, the image-based FE model incorporated with the viscoelastic asphalt mortar phase and elastic aggregates was used for triaxial compressive test simulations, and a triaxial creep experiment under different working conditions was conducted to identify and validate the proposed finite element approach. The numerical simulation and experimental results indicate that the three-dimensional microstructural numerical model established can effectively analyze the material's rheological mechanical response under the effect of triaxial load within the linear viscoelastic range.

| S-EPMC6651784 | biostudies-literature

Laboratory Compaction Study and Mechanical Performance Assessment of Half-Warm Mix Recycled Asphalt Mixtures Containing 100% RAP.

Project description:The use of low-carbon and energy-efficient paving technologies is gaining worldwide acceptance in recent years as a means to encourage commitment towards more sustainable pavement management practices. However, there still remain some technical gaps regarding mix design procedures for the half-warm mix asphalt (HWMA) mixtures' preparation and characterization in the laboratory. To this end, three different laboratory compaction methods (e.g., static load, Marshall impactor, and gyratory compactor) were selected and put into assessment to define the most suitable compaction test method for half-warm mix recycled asphalt (HWMRA) mixtures with 100% reclaimed asphalt pavement (RAP). Posteriorly, the effect of four-accelerated curing treatments (0, 24, 48, and 72 h) on the mixtures' mechanical performance was investigated. Then, advanced mechanical characterization of the mixture performance was conducted to quantify the indirect tensile strength (ITS), stiffness modulus, rutting, and four-point bending (4PB) fatigue test. Thus, based on the authors' findings, the HWMRA mixtures with 100% RAP and emulsified bitumen exhibited proper volumetric (e.g., air voids and density) and mechanical behavior in terms of moisture damage, ITS, stiffness modulus, rutting, and fatigue cracking. These findings encourage greater confidence in promoting the use of these sustainable asphalt mixes for their use in road pavements or urban streets.

| S-EPMC6630296 | biostudies-literature

Composition Design and Performance Evaluation of Emulsified Asphalt Cold Recycled Mixtures.

Project description:Based on an analysis of the cold regeneration mechanism of emulsified asphalt, the emulsified asphalt binders and cement were applied to prepare the cold recycled mixtures, and the main technical performances of the designed mixtures were evaluated, including high-temperature stability, water stability, and fatigue characteristics. A high content of 65% recycled asphalt pavement (RAP) material was used with some new aggregates and mineral powders, and the optimal emulsified asphalt binder and cement dosages were determined as 2.9% and 1.5% respectively. The technical performance test results show that: (1) The well-designed emulsified asphalt cold recycled mixtures have good high-temperature stability and water stability, and can meet the requirements of the road base layer and the lower layer. (2) When the stress level is lower, the fatigue performance of mixtures with lower emulsified asphalt binder dosage and lower cement content is better, but when the stress level is higher, the high dosage of emulsified asphalt binder is more favorable, while the cement content has little effect on the fatigue property. (3) The emulsified asphalt cold recycled mixtures have relatively poor fatigue resistance, and their fatigue life is significantly lower than that of the hot mixed asphalt mixtures.

| S-EPMC6747590 | biostudies-literature

Strength and Micro-Mechanism Analysis of Cement-Emulsified Asphalt Cold Recycled Mixture.

Project description:The strength of EACRM (emulsified asphalt cold recycled mixture) is closely related to the properties and proportion of raw materials. In this paper, the strength formation mechanism of EACRM was first studied through microscopic analysis, and the influence regular of aggregate gradation, emulsified asphalt, water consumption, cement consumption, and other factors on its strength was analyzed through a series of laboratory tests. The analysis results show that the asphalt binder plays the role of cementing material in cement emulsified asphalt mortar. The combination of cement and emulsified asphalt is a physical combination. The hydration product not only increases the viscosity of asphalt cement, but also makes the surface of asphalt cement become uneven, which increases the adhesion area with the aggregate. Therefore, the microstructure of the interface between mortar and aggregate is improved. The bonding force of the interface and the mechanical properties of concrete are improved. Due to the influence of recycled asphalt pavement (RAP) materials, the excessive amount of emulsified asphalt and cement are not conducive to improve the strength of cold recycled mixture. Through experiments, the optimal amount of emulsified asphalt and cement is determined as 2.9% and 1.5%, respectively, for the RAP materials. At the same time, improving the performance of emulsified asphalt and adding quicklime and organic activator are also helpful to improve the strength of a cold recycled mixture.

| S-EPMC6982332 | biostudies-literature

Discrete Element Method Modeling of the Rheological Properties of Coke/Pitch Mixtures.

Project description:Rheological properties of pitch and pitch/coke mixtures at temperatures around 150 °C are of great interest for the carbon anode manufacturing process in the aluminum industry. In the present work, a cohesive viscoelastic contact model based on Burger's model is developed using the discrete element method (DEM) on the YADE, the open-source DEM software. A dynamic shear rheometer (DSR) is used to measure the viscoelastic properties of pitch at 150 °C. The experimental data obtained is then used to estimate the Burger's model parameters and calibrate the DEM model. The DSR tests were then simulated by a three-dimensional model. Very good agreement was observed between the experimental data and simulation results. Coke aggregates were modeled by overlapping spheres in the DEM model. Coke/pitch mixtures were numerically created by adding 5, 10, 20, and 30 percent of coke aggregates of the size range of 0.297-0.595 mm (-30 + 50 mesh) to pitch. Adding up to 30% of coke aggregates to pitch can increase its complex shear modulus at 60 Hz from 273 Pa to 1557 Pa. Results also showed that adding coke particles increases both storage and loss moduli, while it does not have a meaningful effect on the phase angle of pitch.

| S-EPMC5503085 | biostudies-other

Microstructural and Rheological Transitions in Bacterial Biofilms.

Project description:Biofilms are aggregated bacterial communities structured within an extracellular matrix (ECM). ECM controls biofilm architecture and confers mechanical resistance against shear forces. From a physical perspective, biofilms can be described as colloidal gels, where bacterial cells are analogous to colloidal particles distributed in the polymeric ECM. However, the influence of the ECM in altering the cellular packing fraction (ϕ) and the resulting viscoelastic behavior of biofilm remains unexplored. Using biofilms of Pantoea sp. (WT) and its mutant (ΔUDP), the correlation between biofilm structure and its viscoelastic response is investigated. Experiments show that the reduction of exopolysaccharide production in ΔUDP biofilms corresponds with a seven-fold increase in ϕ, resulting in a colloidal glass-like structure. Consequently, the rheological signatures become altered, with the WT behaving like a weak gel, whilst the ΔUDP displayed a glass-like rheological signature. By co-culturing the two strains, biofilm ϕ is modulated which allows us to explore the structural changes and capture a change in viscoelastic response from a weak to a strong gel, and to a colloidal glass-like state. The results reveal the role of exopolysaccharide in mediating a structural transition in biofilms and demonstrate a correlation between biofilm structure and viscoelastic response.

| S-EPMC10520682 | biostudies-literature

Physical, rheological and microscopic properties of AAT nanomaterial/crumb rubber powder composite-modified asphalt and SBS-modified asphalt.

Project description:This research was based on a nano-AAT (American Advanced Technology)-modified asphalt to which CRP (crumb rubber powder), a rubber waste, was introduced to explore the influence of CRP on AAT performance. The changes in the performance of AAT-modified asphalt after the addition of CRP were analyzed. The rubber powder with the raw material of waste tire was added to the asphalt instead of SBS modifier. While achieving waste recycling, the asphalt material has good performance. Physical analysis methods, rheological performance tests, rolling thin-film oven tests and Fourier transform infrared spectroscopy tests were used to investigate the performance of the composite-modified asphalt. The rheological properties of the composite-modified asphalt were analyzed by means of DSR, BBR and MSCR tests, and the microscopic mechanism of the modified asphalt was investigated by means of FTIR tests. The optimal nano-AAT-composite-modified formulation A3C3 (AAT-3.5%SBS-3%CRP) was selected by evaluating the overall performance. Additionally, the performances of the AAT/CRP-composite-modified asphalt and SBS-modified asphalt were compared using physical indicators, the rutting factor, creep flexibility and the stiffness modulus. The results show that the A3C3-modified asphalt had better stiffness, high-temperature (HT) performance and aging resistance than the SBS-modified asphalt, but it was less effective at low temperatures (LTs). According to FTIR, the absorption curves of A3C3 and SBS are essentially equal, with A3C3 only having a variation at 1104 cm-1.

| S-EPMC10783774 | biostudies-literature

Wettability of Asphalt Concrete with Natural and Recycled Aggregates from Sanitary Ceramics.

Project description:In line with the current trend of seeking alternative methods for modification of the existing building composites, such as mineral-asphalt mixtures (MAMs), the materials from concrete and ceramics recycling are being used in increasingly wider applications. When added to MAMs as an aggregate, ceramic building material, which has different properties than the raw material (clay), may significantly influence the aggregate properties, including the wettability, porosity, asphalt adhesion, and consequently the mixture durability. The material's microstructure was found using SEM. The wetting properties of mineral-asphalt mixtures were determined by measuring the contact angles (CA) of their surfaces, using water as the measuring liquid. The total surface free energy (SFE) values were determined using the Neumann method. When analyzing the research results, it can be noticed that the chemical composition of the ceramic aggregate has a significant influence on the adhesion of asphalt to its surface due to the chemical affinity. Waste ceramic aggregate, despite its acidic pH value being connected with its elevated silica content, exhibits good adhesive properties.

| S-EPMC7504282 | biostudies-literature

Investigation of 6PPD-Quinone in Rubberized Asphalt Concrete Mixtures

Project description: Not available

| S-EPMC10655589 | biostudies-literature