Native Cellulose: Structure, Characterization and Thermal Properties.
Ontology highlight
ABSTRACT:
SUBMITTER: Poletto M
PROVIDER: S-EPMC5456159 | biostudies-other | 2014 Aug
REPOSITORIES: biostudies-other
Similar Datasets
Project description:The current environmental problems require the use of low-energy, environmentally friendly methods and nature-like technologies for the creation of materials. In this work, we aim to study the possibility of the direct biotransformation of fibrillar cellulose by fungi through obtaining a cellulose/mycelium-based biocomposite. The cellulose micro- and nanofibrils were used as the main carbon sources in the solid-phase cultivation of basidiomycete Trametes hirsuta. The cellulose fibrils in this process act as a template for growing mycelium with the formation of well-developed net structure. The biotransformation dynamics of cellulose fibrils were studied with the help of scanning electron microscopy. The appearance of nitrogen in the structure of formed fibers was revealed by elemental analysis and FTIR-spectroscopy. The fibers diameters were estimated based on micrograph analysis and the laser diffraction method. It was shown that the diameter of cellulose fibrils can be tuned by fungi through obtaining cellulose-based mycelium fibers with a narrower diameter-size distribution as compared to the pristine cellulose fibrils. The morphology of the resulting mycelium differed when the micro or nanofibrils were used as a substrate.
| S-EPMC9030294 | biostudies-literature
Project description:BackgroundCellulose, the most abundant biopolymer on earth, is an alternative for fossil fuels as a renewable feedstock for the production of second-generation biofuels and other chemicals. The discovery of novel, highly efficient β-glucosidases remains as one of the major bottlenecks for cellulose degradation. In this context, the ascomycete Talaromyces amestolkiae, isolated from cereal samples, has been studied as a promising source for these enzymes.ResultsBGL-2 is the major β-glucosidase secreted by this fungus in the presence of cellulosic inductors. This enzyme possesses a CBD (Cellulose Binding Domain), an unusual feature among this type of proteins. Besides, when growing on cellulose, the fungus produced two different bgl-2 mRNAs that were cloned and expressed in Pichia pastoris. A complete recombinant protein (BGL-2*) and its truncated form, lacking CBD (BGL-2T*), have been purified, characterized and compared with the native enzyme (BGL-2). The three BGL-2 forms studied are highly stable in a wide pH range, but BGL-2T* showed an improved thermal stability at 50 °C after 72 h. Using p-nitrophenyl-β-d-glucopyranoside as a substrate, the steady-state kinetic characterization of the three proteins showed a similar Km and kcat for BGL-2 and BGL-2*, while the truncated protein displayed a threefold higher value for kcat . All tested BGL-2 enzymes were as well highly efficient using cellobiose and other short oligosaccharides as a substrate. In view of biotechnological applications, the recombinant T. amestolkiae enzymes in saccharification of brewers' spent grain were studied, being comparable to commercial β-glucosidase cocktails.ConclusionA new β-glucosidase from T. amestolkiae has been studied. The enzyme, containing a functional CBD, has been expressed in P. pastoris. The comparative analyses of the native protein and its recombinant forms, with and without CBD, suggest that they could be suitable tools for valorization of lignocellulosic biomass.
| S-EPMC5674860 | biostudies-literature
Project description:The purpose of the study is to investigate the utilisation of Napier fiber (Pennisetum purpureum) as a source for the fabrication of cellulose nanofibers (CNF). In this study, cellulose nanofibers (CNF) from Napier fiber were isolated via ball-milling assisted by acid hydrolysis. Acid hydrolysis with different molarities (1.0, 3.8 and 5.6 M) was performed efficiently facilitate cellulose fiber size reduction. The resulting CNFs were characterised through Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), particle size analyser (PSA), field-emission scanning electron microscopy (FESEM), atomic force microscopy (AFM), and transmission electron microscopy (TEM). The FTIR results demonstrated that there were no obvious changes observed between the spectra of the CNFs with different molarities of acid hydrolysis. With 5.6 M acid hydrolysis, the XRD analysis displayed the highest degree of CNF crystallinity at 70.67%. In a thermal analysis by TGA and DTG, cellulose nanofiber with 5.6 M acid hydrolysis tended to produce cellulose nanofibers with higher thermal stability. As evidenced by the structural morphologies, a fibrous network nanostructure was obtained under TEM and AFM analysis, while a compact structure was observed under FESEM analysis. In conclusion, the isolated CNFs from Napier-derived cellulose are expected to yield potential to be used as a suitable source for nanocomposite production in various applications, including pharmaceutical, food packaging and biomedical fields.
| S-EPMC7560349 | biostudies-literature
Project description:The present work explores the possibility of chemically modifying carboxymethyl cellulose (CMC), a widely diffused commercial cellulose ether, by grafting of hydrophobic moieties. Amidation of CMC, at high temperature and in heterogeneous conditions, was selected as synthetic tool for grafting on CMC a panel of commercially available amines (bearing long aliphatic chains, alkyl aromatic and heteroaromatic groups, more or less spaced from the cellulose backbone). The reaction was successfully carried out in absence of solvents, catalysts and coupling agents, providing a promising and more sustainable alternative to conventional amidation procedures. Relationships between the chemical structure of the obtained CMC derivatives and their thermal properties were carefully studied, with a particular attention to the thermal behavior. Grafting of aromatic and heteroaromatic alkyl amines, presenting a linear alkyl chain between CMC backbone and a terminal bulky moiety, allowed for efficiently separating the polysaccharide chains, improving their mobility and resulting in a consequent lowering of the glass transition temperature (Tg). The Tg values obtained (90-147 °C) were found to be closely dependent on both the size of the aliphatic spacer, the structure of the aromatic ring and the extent of amidation.
| S-EPMC6680703 | biostudies-literature
Project description:One of the major obstacles for polyhydroxybutyrate (PHB), a biodegradable and biocompatible polymer, in commercial applications is its poor elongation at break (~3%). In this study, the effects of nanocellulose contents and their types, including cellulose nanocrystals (CNCs) and cellulose nanofibers (CNFs) on the crystallization, thermal, and mechanical properties of PHB composites were systematically compared. We explored the toughening mechanisms of PHB by adding CNCs and cellulose CNFs. The results showed that when the morphology of bagasse nanocellulose was rod-like and its content was 1 wt %, the toughening modification of PHB was the best. Compared with pure PHB, the elongation at break and Young's modulus increased by 91.2% and 18.4%, respectively. Cellulose nanocrystals worked as heterogeneous nucleating agents in PHB and hence reduced its crystallinity and consequently improved the toughness of PHB. This simple approach could potentially be explored as a strategy to extend the possible applications of this biopolymer in packaging fields.
| S-EPMC6960622 | biostudies-literature
Project description:Cellulose aerogels are considered as ideal thermal insulation materials owing to their excellent properties such as a low density, high porosity, and low thermal conductivity. However, they still suffer from poor mechanical properties and low flame retardancy. In this study, mullite-fibers-reinforced bagasse cellulose (Mubce) aerogels are designed using bagasse cellulose as the raw material, mullite fibers as the reinforcing agent, glutaraldehyde as the cross-linking agent, and chitosan as the additive. The resulted Mubce aerogels exhibit a low density of 0.085 g/cm3, a high porosity of 93.2%, a low thermal conductivity of 0.0276 W/(m∙K), superior mechanical performances, and an enhanced flame retardancy. The present work offers a novel and straightforward strategy for creating high-performance aerogels, aiming to broaden the application of cellulose aerogels in thermal insulation.
| S-EPMC11312846 | biostudies-literature
Project description:Many natural materials exhibit a multilayer structure in which adjacent layers rotate in a helicoidal manner. The remarkable optical and mechanical properties of these materials have motivated research and development of man-made materials with similar morphology. Among them, composite materials by cellulose nanocrystals (CNCs) and polymers have attracted great interest; however, the relationship between the cholesteric structure and the material properties is not well understood. We used the composite CNC-polymer latex films with random, stratified, and cholesteric morphologies, all with the same compositions, to explore the effect of structure on the optical and mechanical properties of the composite films. Films with a cholesteric structure exhibited strong extinction, circular dichroism, and high stiffness; however, they had lower toughness than the films with the cholesteric stratified morphology. Films with disordered morphologies exhibited the highest toughness and the lowest stiffness. These trends were attributed to the confinement effects and the difference in polymer distribution in the films. These results provide guidance for the preparation of biomimetic cholesteric films with targeted optical and mechanical properties.
| S-EPMC6644686 | biostudies-literature
Project description:In general, lignin exhibits unpredictable and nonuniform thermal properties due to the structural variations caused by the extraction processes. Therefore, a systematic understanding of the correlation between the extraction conditions, structural characteristics, and properties is indispensable for the commercial utilization of lignin. In this study, the effect of extraction conditions on the structural characteristics of ethanol organosolv lignin (EOL) was investigated by response surface methodology. The structural characteristics of EOL (molecular weight, hydroxyl content, and intramolecular coupling structure) were significantly affected by the extraction conditions (temperature, sulfuric acid concentration, and ethanol concentration). In addition, the correlation between the structural characteristics and thermal properties of the extracted EOLs was estimated. The relevant correlations between the structural characteristics and thermal properties were determined. In particular, EOLs that had a low molecular weight, high phenolic hydroxyl content, and low aryl-ether linkage content exhibited prominent thermal properties in terms of their initial decomposition rate and a high glass transition temperature, T g. Correspondingly, EOL-PLA blends prepared using three EOL types exhibited improved thermal properties (starting point of thermal decomposition and maximum decomposition temperature) compared to neat PLA and had thermal decomposition behaviors coincident with the thermal properties of the constituent EOLs.
| S-EPMC7818625 | biostudies-literature
Project description:Determining the shape of plant cellulose microfibrils is critical for understanding plant cell wall molecular architecture and conversion of cellulose into biofuels. Only recently has it been determined that these cellulose microfibrils are composed of 18 cellulose chains rather than 36 polymers arranged in a diamond-shaped pattern. This study uses density functional theory calculations to model three possible habits for the 18-chain microfibril and compares the calculated energies, structures, 13C NMR chemical shifts and WAXS diffractograms of each to evaluate which shape is most probable. Each model is capable of reproducing experimentally-observed data to some extent, but based on relative theoretical energies and reasonable reproduction of all variables considered, a microfibril based on 5 layers in a 34443 arrangement is predicted to be the most probable. A habit based on a 234432 arrangement is slightly less favored, and a 6 × 3 arrangement is considered improbable.
| S-EPMC6143632 | biostudies-literature
Project description:Understanding how and why animal secretions vary in property has important biomimetic implications as desirable properties might covary. Spider major ampullate (MA) silk, for instance, is a secretion earmarked for biomimetic applications, but many of its properties vary among and between species across environments. Here, we tested the hypothesis that MA silk colour, protein structure and thermal properties covary when protein uptake is manipulated in the spider Trichonephila plumipes. We collected silk from adult female spiders maintained on a protein-fed or protein-deprived diet. Based on spectrophotometric quantifications, we classified half the silks as 'bee visible' and the other half 'bee invisible'. Wide angle X-ray diffraction and differential scanning calorimetry were then used to assess the silk's protein structure and thermal properties, respectively. We found that although protein structures and thermal properties varied across our treatments only the thermal properties covaried with colour. This ultimately suggests that protein structure alone is not responsible for MA silk thermal properties, nor does it affect silk colours. We speculate that similar ecological factors act on silk colour and thermal properties, which should be uncovered to inform biomimetic programmes.
| S-EPMC6685021 | biostudies-literature