Epoxy Resin Composite Based on Functional Hybrid Fillers.
Ontology highlight
ABSTRACT:
SUBMITTER: Oleksy M
PROVIDER: S-EPMC5456203 | biostudies-other | 2014 Aug
REPOSITORIES: biostudies-other
Similar Datasets
Project description:The preparation and characterization of metakaolin-based geopolymer mortars containing an organic epoxy resin are presented here for the first time. The specimens have been prepared by means of an innovative in situ co-reticulation process, in mild conditions, of commercial epoxy based organic resins and geopolymeric slurry. In this way, geopolymer based hybrid mortars characterized by a different content of normalized sand (up to 66% in weight) and by a homogeneous dispersion of the organic resin have been obtained. Once hardened, these new materials show improved compressive strength and toughness in respect to both the neat geopolymer and the hybrid pastes since the organic polymer provides a more cohesive microstructure, with a reduced amount of microcracks. The microstructural characterization allows to point out the presence of an Interfacial Transition Zone similar to that observed in cement based mortars and concretes. A correlation between microstructural features and mechanical properties has been studied too.
| S-EPMC5521291 | biostudies-other
Project description:In this study, the synergistic effect of hexagonal boron nitride (h-BN) with cubic boron nitride (c-BN) on enhancement of thermal conductivity of epoxy resin composites has been reported. The measured thermal conductivities of the epoxy composites filled with h-BN, c-BN and hybrid h-BN/c-BN compared with the theoretical predications of Agari's model strongly suggest that the combination of h-BN platelets and c-BN spherical particles with different sizes is beneficial to enhance the thermal conductivity of the polymer composites by preferentially forming 3D thermally conductive networks at low loading content. Furthermore, the small addition of gold nanoparticles enhances the thermal conductivity from 166% to 237%. The potential application of these composites for thermal management has been demonstrated by the surface temperature variations in real time during heating. The results demonstrate that such thermally conductive but electrically insulating polymer-based composites are highly desirable for thermal management applications.
| S-EPMC9061182 | biostudies-literature
Project description:A polystyrene (PS)-based composite resin dosimeter (CRD) film comprising 2-(phenylamino)-6-(dipentylamino)-3-methylspiro[9H-xanthene-9,3'-phthalide] (Black305) fluoran leuco dye, cerium-doped yttrium aluminum perovskite YAlO3:Ce (YAP:Ce) scintillator, and 2-(4-methoxystyryl)-4,6-bis(trichloromethyl)-1,3,5-triazine (MBTT) photoacid generator was developed for the visualization of X-ray exposure doses in the range of 18-170 Gy. The color of the CRD film changed from yellow to black within this range based on the X-ray exposure dose. A CRD film based on Black305/YAP:Ce/MBTT/PS could be used to produce a dosimeter with various color change sensitivities by controlling the thermodynamic parameters of the constituent materials. A CRD film is a promising tool for measuring the X-ray exposure dose and can be used as an alternative to the existing radiochromic dosimeters.
| S-EPMC6648168 | biostudies-literature
Project description:A novel lead zirconate titanate@polypyrrole (PZT@PPy) aerogel (PPA) was fabricated via in-situ polymerization and subsequent freeze-drying method. The porous PPA was then saturated with epoxy resin to obtain the PPA/epoxy composite (PPAE) by a simple vacuum filling method. In this way, the filler content and dispersion uniformity are well guaranteed, which is in favor of improving the damping and mechanical properties of composites. The morphology and structure of PPAs were investigated using XRD, SEM, EDS and nitrogen absorption and desorption measurements. The results showed that the PPA possessed a three-dimensional porous structure with uniform lead zirconate titanate (PZT) distribution. The influence of PZT content on the damping property of PPAE composite was investigated by dynamic mechanical analysis (DMA). PPAE-75 (i.e., the mass ratio of PZT to PPy is 75 wt %) exhibited the maximum damping loss factor value, 360% higher than that of the epoxy matrix, suggesting good structural damping performance.
| S-EPMC6630557 | biostudies-literature
Project description:A density functional theory-assisted synthesis of self-curing epoxy-acrylic resin (EMPA) is described. The calculated quantum chemistry reaction index of the reacting monomer in the basic state, i.e., the radical reaction index (F k 0), is used as a guide to optimize the synthesis conditions. The reliability of the F k 0-assisted synthesis method is confirmed after evaluating the physical appearance, mechanical properties after curing, and thermal stability of the obtained EMPA. The special functional groups of the resin are characterized by Fourier transform infrared spectroscopy to prove the rationality of the reaction mechanism. The cross-sectional morphology characteristics of the cured resin are observed by field-emission scanning electron microscopy. The results show that the closer the molar ratio of monomers in the reaction to the ratio of F k 0 of the reacting monomers, the better the polymerization performance.
| S-EPMC7855980 | biostudies-literature
Project description:In order to synthesize a new kind of buoyancy material with high-strength, low-density and low-water-absorption and to study the curing reaction of tetraglycidylamine epoxy resin with an aromatic amine curing agent, the non-isothermal differential scanning calorimeter (DSC) method is used to calculate the curing kinetics parameters of N,N,N',N'-tetraepoxypropyl-4,4'-diaminodiphenylmethane epoxy resin (AG-80) and the m-xylylenediamine (m-XDA) curing process. Further, buoyancy materials with different volume fractions of hollow glass microsphere (HGM) compounded with a AG-80 epoxy resin matrix were prepared and characterized. The curing kinetics calculation results show that, for the curing reaction of the AG-80/m-XDA system, the apparent activation energy increases with the conversion rates increasing and the reaction model is the Jander equation (three-dimensional diffusion, 3D, n = 1/2). The experimental results show that the density, compressive strength, saturated water absorption and water absorption rate of the composite with 55 v % HGM are 0.668 g·cm-3, 107.07 MPa, 0.17% and 0.025 h-1/2, respectively. This kind of composite can probably be used as a deep-sea buoyancy material.
| S-EPMC7463793 | biostudies-literature
Project description:As an intelligent material, microcapsules can efficiently self-heal internal microcracks and microdefects formed in cement-based materials during service and improve their durability. In this paper, microcapsules of nano-CaCO3/ceresine wax composite shell encapsulated with E-44 epoxy resin were prepared via the melt condensation method. The core content, compactness, particle size distribution, morphologies, chemical structure and micromechanical properties of microcapsules were characterized. The results showed that the encapsulation ability, mechanical properties and compactness of microcapsules were further improved by adding nano-CaCO3 to ceresine wax. The core content, elastic modulus, hardness and weight loss rate (60 days) of nano-CaCO3/ceresine wax composite shell microcapsules (WM2) were 80.6%, 2.02 GPA, 72.54 MPa and 1.6%, respectively. SEM showed that WM2 was regularly spherical with a rough surface and sufficient space inside the microcapsules to store the healing agent. The incorporation of WM2 to mortar can greatly improve the self-healing ability of mortar after pre-damage. After 14 days of self-healing, the compressive strength recovery rate, proportion of harmful pores and chloride ion diffusion coefficient recovery rate increased to 90.1%, 45.54% and 79.8%, respectively. In addition, WM2 also has good self-healing ability for mortar surface cracks, and cracks with initial width of less than 0.35 mm on the mortar surface can completely self-heal within 3 days.
| S-EPMC8778703 | biostudies-literature
Project description:We prepared novel flame retardants with concurrent excellent smoke-suppression properties based on lignin biomass modified by functional groups containing N and P. Each lignin-based flame retardant (Lig) was quantitatively added to a fixed amount of epoxy resin (EP), to make a Lig/EP composite. The best flame retardancy was achieved by a Lig-F/EP composite with elevated P content, achieving a V-0 rating of the UL-94 test and exhibiting excellent smoke suppression, with substantial reduction of total heat release and smoke production (by 46.6 and 53%, respectively). In this work, we characterized the flame retardants and the retardant/EP composites, evaluated their performances, and proposed the mechanisms of flame retardancy and smoke suppression. The charring layer of the combustion residual was analyzed using SEM and Raman spectroscopy to support the proposed mechanisms. Our work provides a feasible method for lignin modification and applications of new lignin-based flame retardants.
| S-EPMC7745397 | biostudies-literature
Project description:Thiswork is focused on the development of sustainable biocomposites based on epoxy bioresin reinforced with a natural porous material (hydrochar, HC) that is the product of spruce bark wastes subjected to hydrothermal decomposition. To identify the influence of hydrochar as a reinforcing material on the designed composites, seven formulations were prepared and tested. An aromatic epoxy monomer derived from wood biomass was used to generate the polymeric matrix, and the formulations were prepared varying the filler concentration from 0 to 30 wt %. The reactivity of these formulations, together with the structural, thermal, and mechanical properties of bio-based resin and biocomposites, are investigated. Surprisingly, the reactivity study performed by differential scanning calorimetry (DSC) revealed that HC has a strong impact on polymerization, leading to an important increase in reaction enthalpy and to a decrease of temperature range. The Fourier Transform Infrared Spectroscopy (FT-IR) investigations confirmed the chemical bonding between the resin and the HC, while the dynamic mechanical analysis (DMA) showed increased values of crosslink density and of storage moduli in the biocomposites products compared to the neat bioresin. Thermogravimetric analysis (TGA) points out that the addition of hydrochar led to an improvement of the thermal stability of the biocomposites compared with the neat resorcinol diglycidyl ether (RDGE)-based resin (T5% = 337 °C) by ≈2-7 °C. Significantly, the biocomposites with 15-20 wt % hydrochar showed a higher stiffness value compared to neat epoxy resin, 92SD vs. 82SD, respectively.
| S-EPMC7828177 | biostudies-literature
Project description:Purpose:To investigate the effects of nanozirconia fillers conditioned with 10-methacryloyloxydecyl dihydrogen phosphate (MDP) with or without zirconium hydroxide precoating on bending strength, Vickers hardness, and translucence of dental resin composites. Methods:We obtained nanozirconia fillers coated with different concentrations of Zr(OH)4 using wet-chemical synthesis. We analyzed coating quality by observing electron-diffraction patterns using transmission electron microscopy. We conditioned zirconia fillers, with or without prior Zr(OH)4-coating, using MDP-containing primers and evaluated the formation of chemical bonds using nuclear magnetic resonance (NMR) and X-ray photoelectron spectroscopy (XPS). We then performed three-point bending-strength tests, Weibull analysis, Vickers hardness, and translucence-parameter analysis with or without addition of different concentrations of zirconia using untreated zirconia fillers as controls. Results:We achieved desirable Zr(OH)4 coating using 5 mmol/L zirconium chloride. NMR and XPS analysis detected stronger Zr-O-P peaks on MDP-conditioned zirconia fillers with prior Zr(OH)4-coating compared with MDP-conditioned fillers alone, suggesting that MDP bonding with zirconia was enhanced by zirconium hydroxide. Our three-point bending-strength tests revealed that increasing levels of untreated zirconia fillers decreased the three-point bending strength of the resin composites, while MDP-conditioned zirconia fillers with or without prior Zr(OH)4 coating improved three-point bending strengths. Adding 5 wt% and 7.5 wt% MDP-conditioned zirconia fillers with prior Zr(OH)4 coating achieved the highest three-point bending strength. Furthermore, addition of zirconia fillers decreased the translucence of silica-based resin composites. Conclusion:MDP conditioning with prior Zr(OH)4 coating is recommended for treating nanozirconia fillers of resin composites.
| S-EPMC6884999 | biostudies-literature