Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Selective Photophysical Modification on Light-Emitting Polymer Films for Micro- and Nano-Patterning.

ABSTRACT: Laser-induced cross-linking in polymeric semiconductors was utilized to achieve micro- and nano-structuring in thin films. Single- and two-photon cross-linking processes led to the reduction in both the refractive index and thickness of the polymer films. The resultant photonic structures combine the features of both relief- and phase-gratings. Selective cross-linking in polymer blend films based on different optical response of different molecular phases enabled "solidification" of the phase-separation scheme, providing a stable template for further photonic structuring. Dielectric and metallic structures are demonstrated for the fabrication methods using cross-linking in polymer films. Selective cross-linking enables direct patterning into polymer films without introducing additional fabrication procedures or additional materials. The diffraction processes of the emission of the patterned polymeric semiconductors may provide enhanced output coupling for light-emitting diodes or distributed feedback for lasers.

SUBMITTER: Zhang X

PROVIDER: S-EPMC5456655 | biostudies-other | 2016 Feb

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Space-Selective Fabrication of Light-Emitting Carbon Dots in Polymer Films Using Electron-Beam-Induced Chemical Reactions.

Project description:Nanocarbon-based materials have excellent properties, including high electrical conductivity as well as charity-dependent optical absorption and luminescence; therefore, the materials are promising in applications for nanoelectric devices, nanophotonics, and so on. Carbon dots (CDs) are one of the carbon materials recently fabricated. Optical properties of CDs have been reported to be similar to those of polycyclic aromatic hydrocarbons (PAHs). For this reason, the CDs are considered to be composed of PAH. Synthesis of CDs has previously been accomplished through hydrothermal synthesis and microwave irradiation. These methods require a long synthesis time, and the processes involve multiple steps. In this study, we developed a fabrication method of CDs in simple and spatially selective ways, by using radical reactions in an organic polymer film with focused electron-beam irradiation. We investigated various organic polymers as reaction materials and found that polystyrene has a higher efficiency for CD formation than other organic polymers investigated. Absorption, photoluminescence, and Raman scattering properties of the electron-beam-irradiated sample were in good agreement with those reported for the CDs. The technique developed in this study is promising for fabricating light-emitting CDs and photonic crystals in a simple and flexible manner.

| S-EPMC6648354 | biostudies-literature

A discrete core-shell-like micro-light-emitting diode array grown on sapphire nano-membranes.

Project description:A discrete core-shell-like micro-light-emitting diode (micro-LED) array was grown on a 100 nm-thick sapphire nano-membrane array without harmful plasma etching for chip singulation. Due to proper design for the sapphire nano-membrane array, an array of multi-faceted micro-LEDs with size of 4 ?m × 16 ?m was grown. Threading dislocation density in the micro-LED formed on sapphire nano-membrane was reduced by 59.6% due to the sapphire nano-membranes, which serve as compliant substrates, compared to GaN formed on a planar substrate. Enhancements in internal quantum efficiency by 44% and 3.3 times higher photoluminescence intensity were also observed from it. Cathodoluminescence emission at 435?nm was measured from c-plane multiple quantum wells (MQWs), whereas negligible emissions were detected from semi-polar sidewall facets. A core-shell-like MQWs were formed on all facets, hopefully lowering concentration of non-radiative surface recombination centers and reducing leakage current paths. This study provides an attractive platform for micro-LEDs by using sapphire nano-membrane.

| S-EPMC7200800 | biostudies-literature

Micro and Nano Smart Composite Films Based on Copper-Iodine Coordination Polymer as Thermochromic Biocompatible Sensors.

Project description:Herein is presented the preparation and characterization of a composite material obtained by the combination of nanosheets of a coordination polymer (CP) based on the copper(I)-I double chain with response to temperature and pressure with polylactic acid (PLA) as biodegradable organic matrix. The new films of composite materials are generated using a simple and low-cost method and can be created with long lateral dimensions and thicknesses ranging from a few microns to a few nanometers. Studies show that the new material maintains the optical response versus the temperature, while the elasticity and flexibility of the PLA totally quenches the response to pressure previously observed for the CP. This new material can act as a reversible sensor at low temperatures, thanks to the flexibility of the copper(I)-iodine chain that conforms the CP. The addition of CP to the PLA matrix reduces the elastic modulus and ultimate elongation of the organic matrix, although it does not reduce its tensile strength.

| S-EPMC6630835 | biostudies-literature

Selectively Patterning Polymer Opal Films via Microimprint Lithography.

Project description:Large-scale structural color flexible coatings have been hard to create, and patterning color on them is key to many applications, including large-area strain sensors, wall-size displays, security devices, and smart fabrics. To achieve controlled tuning, a micro-imprinting technique is applied here to pattern both the surface morphology and the structural color of the polymer opal films (POFs). These POFs are made of 3D ordered arrays of hard spherical particles embedded inside soft shells. The soft outer shells cause the POFs to deform upon imprinting with a pre-patterned stamp, driving a flow of the soft polymer and a rearrangement of the hard spheres within the films. As a result, a patterned surface morphology is generated within the POFs and the structural colors are selectively modified within different regions. These changes are dependent on the pressure, temperature, and duration of imprinting, as well as the feature sizes in the stamps. Moreover, the pattern geometry and structural colors can then be further tuned by stretching. Micropattern color generation upon imprinting depends on control of colloidal transport in a polymer matrix under shear flow and brings many potential properties including stretchability and tunability, as well as being of fundamental interest.

| S-EPMC4497474 | biostudies-literature

Hybrid Color-Tunable Polymer Light-Emitting Diodes Using Electrospraying.

Project description:This paper proposes a new paradigm in polymer light-emitting diode (PLED) fabrication by using a uniform electrosprayed microparticle film as the active layer. Among the seven electrospraying parameters analyzed, three crucial parameters are statistically identified and optimized to obtain thin electrosprayed microparticle layers. Using optimized electrospraying conditions, single-color red-emitting PLED (MEH-PPV) with a peak current density of 16.1 mA/mm2 under a 13.5 V bias and a peak external quantum efficiency of 3.2% are successfully fabricated. Finally, a combinatorial approach is implemented using both MEH-PPV (red-emitting) and F8BT (green-emitting) polymer microparticles at different mixing ratios to tune the emission spectrum of the devices. As such, it has been demonstrated that hybrid multilayer films using different organic materials with nonorthogonal solvents can be produced using this new approach. The parameter analysis and color-tunable properties pave the way towards white light PLED fabrication.

| S-EPMC6868885 | biostudies-literature

Micro-light-emitting diodes with quantum dots in display technology.

Project description:Micro-light-emitting diodes (?-LEDs) are regarded as the cornerstone of next-generation display technology to meet the personalised demands of advanced applications, such as mobile phones, wearable watches, virtual/augmented reality, micro-projectors and ultrahigh-definition TVs. However, as the LED chip size shrinks to below 20??m, conventional phosphor colour conversion cannot present sufficient luminance and yield to support high-resolution displays due to the low absorption cross-section. The emergence of quantum dot (QD) materials is expected to fill this gap due to their remarkable photoluminescence, narrow bandwidth emission, colour tuneability, high quantum yield and nanoscale size, providing a powerful full-colour solution for ?-LED displays. Here, we comprehensively review the latest progress concerning the implementation of ?-LEDs and QDs in display technology, including ?-LED design and fabrication, large-scale ?-LED transfer and QD full-colour strategy. Outlooks on QD stability, patterning and deposition and challenges of ?-LED displays are also provided. Finally, we discuss the advanced applications of QD-based ?-LED displays, showing the bright future of this technology.

| S-EPMC7214519 | biostudies-literature

Motion of Adsorbed Nano-Particles on Azobenzene Containing Polymer Films.

Project description:We demonstrate in situ recorded motion of nano-objects adsorbed on a photosensitive polymer film. The motion is induced by a mass transport of the underlying photoresponsive polymer material occurring during irradiation with interference pattern. The polymer film contains azobenzene molecules that undergo reversible photoisomerization reaction from trans- to cis-conformation. Through a multi-scale chain of physico-chemical processes, this finally results in the macro-deformations of the film due to the changing elastic properties of polymer. The topographical deformation of the polymer surface is sensitive to a local distribution of the electrical field vector that allows for the generation of dynamic changes in the surface topography during irradiation with different light interference patterns. Polymer film deformation together with the motion of the adsorbed nano-particles are recorded using a homemade set-up combining an optical part for the generation of interference patterns and an atomic force microscope for acquiring the surface deformation. The particles undergo either translational or rotational motion. The direction of particle motion is towards the topography minima and opposite to the mass transport within the polymer film. The ability to relocate particles by photo-induced dynamic topography fluctuation offers a way for a non-contact simultaneous manipulation of a large number of adsorbed particles just in air at ambient conditions.

| S-EPMC6274334 | biostudies-literature

Chemical patterning of ultrathin polymer films by direct-write multiphoton lithography.

Project description:We applied 2-photon laser ablation to write subdiffraction nanoscale chemical patterns into ultrathin polymer films under ambient conditions. Poly(ethylene glycol) methacrylate brush layers were prepared on quartz substrates via surface-initiated atom-transfer radical polymerization and ablated to expose the underlying substrate using the nonlinear 2-photon absorbance of a frequency-doubled Ti:sapphire femtosecond laser. Single-shot ablation thresholds of polymer films were ~1.5 times smaller than that of a quartz substrate, which allowed patterning of nanoscale features without damage to the underlying substrate. At a 1/e(2) laser spot diameter of 0.86 ?m, the features of exposed substrate approached ~80 nm, well below the diffraction limit for 400 nm light. Ablated features were chemically distinct and amenable to chemical modification.

| S-EPMC3086137 | biostudies-literature

Rapidly patterning micro/nano devices by directly assembling ions and nanomaterials.

Project description:The synthesis and assembly of components are key steps in micro/nano device manufacturing. In this article, we report an optically controlled assembly method that can rapidly pattern micro/nano devices by directly assembling ions and nanomaterials without expensive physical masks and complex etching processes. Utilizing this controllable process, different types of device components (e.g., metallic and semiconductor) can be fabricated and assembled in 10-30?seconds, which is far more rapid and cost-effective than any other micro/nano fabrication method.

| S-EPMC4999812 | biostudies-other

Light induced reversible structuring of photosensitive polymer films.

Project description:In this paper we report on photoswitchable polymer surfaces with dynamically and reversibly fluctuating topographies. It is well known that when azobenzene containing polymer films are irradiated with optical interference patterns the film topography changes to form a surface relief grating. In the simplest case, the film shape mimics the intensity distribution and deforms into a wave like, sinusoidal manner with amplitude that may be as large as the film thickness. This process takes place in the glassy state without photo-induced softening. Here we report on an intriguing discovery regarding the formation of reliefs under special illumination conditions. We have developed a novel setup combining the optical part for creating interference patterns, an AFM for in situ acquisition of topography changes and diffraction efficiency signal measurements. In this way we demonstrate that these gratings can be "set in motion" like water waves or dunes in the desert. We achieve this by applying repetitive polarization changes to the incoming interference pattern. Such light responsive surfaces represent the prerequisite for providing practical applications ranging from conveyer or transport systems for adsorbed liquid objects and colloidal particles to generation of adaptive and dynamic optical devices.

| S-EPMC9065545 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data