A Review of Natural Joint Systems and Numerical Investigation of Bio-Inspired GFRP-to-Steel Joints.
Ontology highlight
ABSTRACT:
SUBMITTER: Avgoulas EI
PROVIDER: S-EPMC5456843 | biostudies-other | 2016 Jul
REPOSITORIES: biostudies-other
Similar Datasets
Project description:The micropillar array electrode (µAE) has been widely applied in microchip-based electrochemical detection systems due to a large current response. However, it was found that amplifying the current through further adjusting geometrical parameters is generally hindered by the shielding effect. To solve this problem, a bio-inspired micropillar array electrode (bµAE) based on the microfluidic device has been proposed in this study. The inspiration is drawn from the structure of leatherback sea turtles' mouths. By deforming a μAE to rearrange the micropillars on bilateral sides of the microchannel, the contact area between micropillars and analytes increases, and thus the current is substantially improved. A numerical simulation was then used to characterize the electrochemical performance of bµAEs. The effects of geometrical and hydrodynamic parameters on the current of bµAEs were investigated. Moreover, a prototypical microchip integrated with bµAE was fabricated for detailed electrochemical measurement. The chronoamperometry measurements were conducted to verify the theoretical performance of bµAEs, and the results suggest that the experimental data are in good agreement with those of the simulation model. This work presents a novel bµAE with great potential for highly sensitive electrochemical detection and provides a new perspective on the efficient configuration of the µAE.
| S-EPMC9599680 | biostudies-literature
Project description:Numerical simulations are employed to study the hydrodynamics of self-propelled thunniform swimming. The swimmer is modeled as a tuna-like flexible body undulating with kinematics of thunniform type. The wake evolution follows the vortex structures arranged nearly vertical to the forward direction, vortex dipole formation resulting in the propulsion motion, and finally a reverse Kármán vortex street. We also carry out a systematic parametric study of various aspects of the fluid dynamics behind the freely swimming behavior, including the swimming speed, hydrodynamic forces, power requirement and wake vortices. The present results show that the fin thrust as well as swimming velocity is an increasing function of both tail undulating amplitude Ap and oscillating amplitude of the caudal fin θm. Whereas change on the propulsive performance with Ap is associated with the strength of wake vortices and the area of suction region on the fin, the swimming performance improves with θm due to the favorable tilting of the fin that make the pressure difference force more oriented toward the thrust direction. Moreover, the energy loss in the transverse direction and the power requirement increase with Ap but decrease with θm, and this indicates that for achieving a desired swimming speed increasing θm seems more efficiently than increasing Ap. Furthermore, we have compared the current simulations with the published experimental studies on undulatory swimming. Comparisons show that our work tackles the flow regime of natural thunniform swimmers and follows the principal scaling law of undulatory locomotion reported. Finally, this study enables a detailed quantitative analysis, which is difficult to obtain by experiments, of the force production of the thunniform mode as well as its connection to the self-propelled swimming kinematics and vortex wake structure. The current findings help provide insights into the swimming performance and mechanisms of self-propelled thunniform locomotion.
| S-EPMC5375146 | biostudies-literature
Project description:In this work, two copper-based biometamaterials were engineered using leaves of water cabbage (Pistia stratiotes) and purple bauhinia (Phanera purpurea) as templates. The copper sputtering was implemented to produce a thin copper film on the surface of leaves. The scanning electron microscopy (SEM) images exhibited the root hair-like nanostructure of water cabbage leaf and single comb-like nanostructure of purple bauhinia leaf. In spite of copper coating, the leaf surfaces of water cabbage and purple bauhinia were black and exhibited excellent light absorption at visible and near infrarrred wavelengths. It was estimated that these two types of leaves could absorb roughly 90% of light. Finite-difference time-domain (FDTD) calculations predicted the low reflectance stemming from the leaf nanostructures and copper coating layer. Because of the low cost of copper as a coating metal and simple procedure, this can be a promising method for quick fabrication of a thin copper film on the leaf nanostructure for application in blackbody or as the light absorbers.
| S-EPMC7039963 | biostudies-literature
Project description:A mechanical device inspired by the pistol shrimp snapper claw was developed. This technology features a claw characterized by a periodic opening/closing motion, at a controlled frequency, capable of producing oscillating flows at transitional Reynolds numbers. An innovative method was also proposed for determining the corrosion rate of carbon steel samples under oscillating acidic streams (aqueous solution of HCl). By employing very-thin carbon steel specimens (25 μm thickness), with one side coated with Zn and not exposed to the stream, it became possible to electrochemically sense the Zn surface once the steel sample was perforated, thus providing the average dissolution rate into the most relevant pit on the steel surface. Furthermore, a laser light positioned beneath the metallic sample, along with a camera programmed to periodically capture images of the steel surface, facilitated the accurate counting of the number of newly formed pits. The system consisting of the thin steel sample and the Zn coating can be seen as a type of corrosion sensor. Furthermore, the proposed laser illumination method allows corroborating the electrochemical detection of pits and also establishing their location. The techniques crafted in this study pave the way for developing alternative corrosion sensors that boast appealing attributes: affordability, compactness, and acceptable accuracy to detect in time and space localized damage.
| S-EPMC10994280 | biostudies-literature
Project description:Bio-inspired engineering has been envisioned in a wide array of applications. All living bodies on Earth, including animals and plants, have well organized functional systems developed by nature. These naturally designed functional systems inspire scientists and engineers worldwide to mimic the system for practical applications by human beings. Researchers in the academic world and industries have been trying, for hundreds of years, to demonstrate how these natural phenomena could be translated into the real world to save lives, money and time. One of the most fascinating natural phenomena is the resistance of living bodies to contamination by dust and other pollutants, thus termed as self-cleaning phenomenon. This phenomenon has been observed in many plants, animals and insects and is termed as the Lotus Effect. With advancement in research and technology, attention has been given to the exploration of the underlying mechanisms of water repellency and self-cleaning. As a result, various concepts have been developed including Young's equation, and Wenzel and Cassie-Baxter theories. The more we unravel this process, the more we get access to its implications and applications. A similar pursuit is emphasized in this review to explain the fundamental principles, mechanisms, past experimental approaches and ongoing research in the development of bio-inspired superhydrophobic textiles.
| S-EPMC5457239 | biostudies-other
Project description:BackgroundOn 30 January 2020, a public health emergency of international concern was declared as a result of the new COVID-19 disease, caused by the SARS-CoV-2 virus. This virus is transmitted by air and, therefore, clinical practices with the production of contaminant aerosols are highly at risk. The purpose of this review was to assess the effectiveness of bio-inspired systems, as adjuvants to nonsurgical periodontal therapy, in order to formulate bio-inspired protocols aimed at restoring optimal condition, reducing bacteremia and aerosols generation.MethodsA comprehensive and bibliometric review of articles published in English. Research of clinical trials (RCTs) were included with participants with chronic or aggressive periodontal disease, that have compared benefits for nonsurgical periodontal therapy (NSPT).ResultsSeventy-four articles have been included. For probing depth (PPD) there was a statically significant improvement in laser, probiotic, chlorhexidine groups, such as gain in clinical attachment level (CAL). Bleeding on probing (BOP) reduction was statistically significant only for probiotic and chlorhexidine groups. There were changes in microbiological and immunological parameters.ConclusionsThe use of bio-inspired systems in nonsurgical periodontal treatment may be useful in reducing risk of bacteremia and aerosol generation, improving clinical, microbiological and immunological parameters, of fundamental importance in a context of global pandemic, where the reduction of bacterial load in aerosols becomes a pivotal point of clinical practice, but other clinical trials are necessary to achieve statistical validity.
| S-EPMC7761598 | biostudies-literature
Project description:Collision prevention sets a major research and development obstacle for intelligent robots and vehicles. This paper investigates the robustness of two state-of-the-art neural network models inspired by the locust's LGMD-1 and LGMD-2 visual pathways as fast and low-energy collision alert systems in critical scenarios. Although both the neural circuits have been studied and modelled intensively, their capability and robustness against real-time critical traffic scenarios where real-physical crashes will happen have never been systematically investigated due to difficulty and high price in replicating risky traffic with many crash occurrences. To close this gap, we apply a recently published robotic platform to test the LGMDs inspired visual systems in physical implementation of critical traffic scenarios at low cost and high flexibility. The proposed visual systems are applied as the only collision sensing modality in each micro-mobile robot to conduct avoidance by abrupt braking. The simulated traffic resembles on-road sections including the intersection and highway scenes wherein the roadmaps are rendered by coloured, artificial pheromones upon a wide LCD screen acting as the ground of an arena. The robots with light sensors at bottom can recognise the lanes and signals, tightly follow paths. The emphasis herein is laid on corroborating the robustness of LGMDs neural systems model in different dynamic robot scenes to timely alert potential crashes. This study well complements previous experimentation on such bio-inspired computations for collision prediction in more critical physical scenarios, and for the first time demonstrates the robustness of LGMDs inspired visual systems in critical traffic towards a reliable collision alert system under constrained computation power. This paper also exhibits a novel, tractable, and affordable robotic approach to evaluate online visual systems in dynamic scenes.
| S-EPMC8378452 | biostudies-literature
Project description:Underwater radiated noise (URN) has a negative impact on the marine acoustic environment where it can disrupt marine creature's basic living functions such as navigation and communication. To control the ambient ocean noise levels due to human activities, international governing bodies such as the International Maritime Organization (IMO) have issued non-mandatory guidelines to address this issue. Under such framework, the hydroacoustic performance of marine vehicles has become a critical factor to be evaluated and controlled throughout the vehicles' service life in order to mitigate the URN level and the role humankind plays in the ocean. This study aims to apply leading-edge (LE) tubercles of the humpback whales' pectoral fins to a benchmark ducted propeller to investigate its potential in noise mitigation. This was conducted using CFD, where the high-fidelity improved delayed detached eddy simulations (IDDES) in combination with the porous Ffowcs-Williams Hawkings (FW-H) acoustic analogy was used to solve the hydrodynamic flow field and propagate the generated noise to the far-field. It has been found that the LE tubercles have shown promising noise mitigation capabilities in the far-field, where the OASPL at J = 0.1 was reduced to a maximum of 3.4 dB with a maximum of 11 dB reduction in certain frequency ranges at other operating conditions. Based on detailed flow analysis researching the fundamental vortex dynamics, this noise reduction is shown to be due to the disruption of the coherent turbulent wake structure in the propeller slipstream causing the acceleration in the dissipation of turbulence and vorticity-induced noise.
| S-EPMC8424344 | biostudies-literature
Project description:Natural deep eutectic systems (NADES) are emerging as potential cryoprotective agents (CPA) for cell preservation. In this investigation, we develop an optimized CPA formulation using trehalose-glycerol NADES (T:G) diluted in Normosol-R and supplemented with isoleucine. Differential scanning calorimetry (DSC) is used to define the thermophysical properties of NADES-based solutions, and Raman spectroscopy is used to characterize the effect of NADES on ice formation and hydrogen bonding. Jurkat cells are cryopreserved in each solution, and post-thaw cell recovery, apoptosis, and growth are quantified. Raman spectra and heat maps show that NADES suppresses both ice formation and dehydration of the nonfrozen region. Supplementing NADES with isoleucine does not affect the solution's thermophysical properties but significantly improves the cells' survival and proliferation post-thaw. The study indicates that thermophysical properties of CPA solutions alone cannot predict optimal cell survival, suggesting that stabilization of biological structures by CPAs may play a role in successful cryopreservation.
| S-EPMC8315112 | biostudies-literature
Project description:Shaping ceramics into complex and intricate geometries using cost-effective processes is desirable in many applications but still remains an open challenge. Inspired by plant seed dispersal units that self-fold on differential swelling, we demonstrate that self-shaping can be implemented in ceramics by programming the material's microstructure to undergo local anisotropic shrinkage during heat treatment. Such microstructural design is achieved by magnetically aligning functionalized ceramic platelets in a liquid ceramic suspension, subsequently consolidated through an established enzyme-catalysed reaction. By fabricating alumina compacts exhibiting bio-inspired bilayer architectures, we achieve deliberate control over shape change during the sintering step. Bending, twisting or combinations of these two basic movements can be successfully programmed to obtain a myriad of complex shapes. The simplicity and the universality of such a bottom-up shaping method makes it attractive for applications that would benefit from low-waste ceramic fabrication, temperature-resistant interlocking structures or unusual geometries not accessible using conventional top-down manufacturing.
| S-EPMC5196359 | biostudies-literature