Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Vaccinium meridionale Swartz Supercritical CO₂ Extraction: Effect of Process Conditions and Scaling Up.

ABSTRACT: Vaccinium meridionale Swartz (Mortiño or Colombian blueberry) is one of the Vaccinium species abundantly found across the Colombian mountains, which are characterized by high contents of polyphenolic compounds (anthocyanins and flavonoids). The supercritical fluid extraction (SFE) of Vaccinium species has mainly focused on the study of V. myrtillus L. (blueberry). In this work, the SFE of Mortiño fruit from Colombia was studied in a small-scale extraction cell (273 cm³) and different extraction pressures (20 and 30 MPa) and temperatures (313 and 343 K) were investigated. Then, process scaling-up to a larger extraction cell (1350 cm³) was analyzed using well-known semi-empirical engineering approaches. The Broken and Intact Cell (BIC) model was adjusted to represent the kinetic behavior of the low-scale extraction and to simulate the large-scale conditions. Extraction yields obtained were in the range 0.1%-3.2%. Most of the Mortiño solutes are readily accessible and, thus, 92% of the extractable material was recovered in around 30 min. The constant CO₂ residence time criterion produced excellent results regarding the small-scale kinetic curve according to the BIC model, and this conclusion was experimentally validated in large-scale kinetic experiments.

SUBMITTER: Lopez-Padilla A

PROVIDER: S-EPMC5456886 | biostudies-other | 2016 Jun

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Scaling Up the Process of Titanium Dioxide Nanotube Synthesis and Its Effect on Photoelectrochemical Properties.

Project description:In this work, for the first time, the influence of scaling up the process of titanium dioxide nanotube (TiO2NT) synthesis on the photoelectrochemical properties of TiO2 nanotubes is presented. Titanium dioxide nanotubes were obtained on substrates of various sizes: 2 × 2, 4 × 4, 5 × 5, 6 × 6, and 8 × 8 cm2. The electrode material was characterized using scanning electron microscopy as well as Raman and UV-vis spectroscopy in order to investigate their morphology, crystallinity, and absorbance ability, respectively. The obtained electrodes were used as photoanodes for the photoelectrochemical water splitting. The surface analysis was performed, and photocurrent values were determined depending on their place on the sample. Interestingly, the values of the obtained photocurrent densities in the center of each sample were similar and were about 80 µA·cm2. The results of our work show evidence of a significant contribution to wider applications of materials based on TiO2 nanotubes not only in photoelectrochemistry but also in medicine, supercapacitors, and sensors.

| S-EPMC8510213 | biostudies-literature

Valorization of Bilberry (Vaccinium myrtillus L.) Pomace by Enzyme-Assisted Extraction: Process Optimization and Comparison with Conventional Solid-Liquid Extraction.

Project description:Bilberry (Vaccinium myrtillus L.) pomace contains a significant amount of polyphenols and can serve as a basis for food additives, nutraceuticals, and functional foods. Although various techniques can be employed to recover bioactive fractions from berry pomaces, data on enzyme-assisted extraction (EAE) of bilberry pomace are rather scarce. This study aimed to optimize critical EAE parameters using Viscozyme L to obtain a high-yield extract with enhanced antioxidant capacity. Central composite design and response surface methodology evaluating the effect of four independent variables, namely, pH, temperature, extraction time, and enzyme concentration on three responses, were employed to define optimal EAE conditions. Under the optimal conditions (pH: 4.5, temperature 46 °C, 1 h of extraction, and 2 active units (AU) of Viscozyme L/g of pomace), EAE yielded 56.15 g/100 g DW of the water-soluble fraction. Comparison with conventional maceration indicated that EAE, besides the yield, significantly increased the in vitro antioxidant capacity measured by the total phenolic content, ABTS, ORAC, and CUPRAC assays. Moreover, an increase was observed for the measured mono- and disaccharide as well as anthocyanin content. Overall, this study demonstrates the improved efficiency of EAE over conventional solid-liquid extraction to recover fractions with a higher yield and enhanced functional properties in a fast and sustainable manner.

| S-EPMC8152979 | biostudies-literature

Supercritical CO2 extraction of Marrubium vulgare: intensification of marrubiin.

Project description:Supercritical carbon dioxide and Soxhlet extraction were employed for delivering Marrubium vulgare extracts. By varying process temperature and pressure, the impact of different densities of carbon dioxide on the extraction yield and chemical profile of the extracts was investigated. The highest extraction yields of M. vulgare were obtained by supercritical carbon dioxide extraction (3.51%) at 300 bar and 60 °C, while the yield obtained with the Soxhlet extraction was 3.23%. The chemical profiles of these two extracts were significantly different and marrubiin, the most dominant component of supercritical extracts was not present in extracts obtained by this conventional method. This labdane diterpene was the most abundant in extracts obtained at 200 bar and temperatures of 40, 50, and 60 °C (62.60, 68.41, and 71.96%, respectively). For the intensification of marrubiin, supercritical fractions were collected in successive time intervals over the course of the extraction (300 bar/60 °C). It was determined that after 1 h of extraction the highest content of marrubiin (75.14%) can be achieved. The similarities between the obtained extracts were estimated and the correlations to the content of identified lipophilic compounds were established using multivariate data analysis tools.

| S-EPMC8695339 | biostudies-literature

A Continuous Extraction and Pumpless Supercritical CO₂ Drying System for Laboratory-Scale Aerogel Production.

Project description:Production of aerogels starts with solution chemistry and may end with supercritical carbon dioxide drying, which both require a specialized system. Here we present a complete aerogel production system that was developed and used in our laboratory over the last nine years. Our aim was to develop a supercritical dryer and a protocol, whereby the CO₂ pump can be left out, and the entire flow system is operated by the pressure of the CO₂ cylinder. Drying pressure and temperature are controlled by the combination of the filling and heating temperatures. A continuous-mode solvent exchange system has also been developed, in which the solvent consumption during the process can be reduced to one-third of the batch method. In the new medium temperature 1.5 L volume supercritical dryer, the temperature is set to a constant 80⁻82 °C, and the pressure can be in the 90⁻200 bar range, depending on the conditions. We have performed approximately 200 dryings thus far, and prepared a wide range of monolithic aerogels, from pristine silica aerogels to polysaccharides and collagen. In this paper, we have summarized not only the technical details, but also the work experiences, as well as advantages and disadvantages of the systems.

| S-EPMC6318629 | biostudies-literature

Valorization of Fermented Shrimp Waste with Supercritical CO2 Conditions: Extraction of Astaxanthin and Effect of Simulated Gastrointestinal Digestion on Its Antioxidant Capacity.

Project description:Lactic acid fermentation increases the bioactive properties of shrimp waste. Astaxanthin is the principal carotenoid present in shrimp waste, which can be found esterified in the liquid fraction (liquor) after its lactic acid fermentation. Supercritical CO2 technology has been proposed as a green alternative to obtain astaxanthin from fermented shrimp waste. This study aimed to optimize astaxanthin extraction by supercritical CO2 technology from fermented liquor of shrimp waste and study bioaccessibility using simulated gastrointestinal digestion (GD) of the optimized extract. A Box-Behnken design with three variables (pressure, temperature, and flow rate) was used to optimize the supercritical CO2 extraction. The optimized CO2 extract was obtained at 300 bar, 60 °C, and 6 mL/min, and the estimated characteristics showed a predictive extraction yield of 11.17%, antioxidant capacity of 1.965 mmol of Trolox equivalent (TE)/g, and astaxanthin concentration of 0.6353 µg/g. The experiment with optimal conditions performed to validate the predicted values showed an extraction yield of 12.62%, an antioxidant capacity of 1.784 mmol TE/g, and an astaxanthin concentration of 0.52 µg/g. The astaxanthin concentration decreased, and the antioxidant capacity of the optimized extract increased during gastrointestinal digestion. In conclusion, our optimized supercritical CO2 process is suitable for obtaining astaxanthin from shrimp by-products after lactic acid fermentation.

| S-EPMC8348114 | biostudies-literature

Effect of Experimental Parameters on the Extraction of Grape Seed Oil Obtained by Low Pressure and Supercritical Fluid Extraction.

Project description:Grape seeds are an important byproduct from the grape process. The objective of this work was to evaluate the effect of experimental parameters (temperature and time of pretreatment with ultrasound) to obtain grape seed oil using low pressure (Soxhlet-Sox and Bligh Dyer-BD) and high pressure (supercritical carbon dioxide-SFE) methods. The best condition for pretreatment of samples was 30 min of sonication at 30 °C before extraction by Sox or BD. Ultrasound pretreatment was efficient to increase oil extraction yield by 32.10 (Sox), 20.31 (BD) and 12.54% (SFE), depending on the extraction method used as well as, and certainly influenced the total phenolic concentration in 311 (Sox), 234 (BD), and 184 (SFE)%. Ten fatty acids were identified in the oils, the major ones being 18:2?-6cis (linoleic 52.39%-63.12%), 16:0 (palmitic 20.22%-26.80%) and 18:0 (stearic 8.52%-13.68%). The highest epicatechin concentration was identified in the BD sample: 30-30 (150.49 ± 5.98mg/kg), which presented a concentration of ?3 times compared to the control (56.68 ± 1.81mg/kg). Ultrasound pretreatment also contributed positively (56% and 99% increase) in the ?-tocopherol content of the SFE: 30-30 and BD: 30-30 samples, respectively. The results indicate that the ultrasound pretreatment is a suitable technology to improve the quality of the oil from the grape seed.

| S-EPMC7180707 | biostudies-literature

Generation of Highly Antioxidant Submicron Particles from Myrtus communis Leaf Extract by Supercritical Antisolvent Extraction Process.

Project description:Submicron particles have been produced from an ethanolic extract of Myrtus communnis leaves using supercritical carbon dioxide technology, hereinafter referred to as Supercritical Antisolvent Extraction (SAE). The influence of pressure (9-20 MPa), temperature (308 and 328 K) and injection rate (3 and 8 mL/min) on the particles' precipitation has been investigated, and it has been confirmed that increases in pressure and temperature led to smaller particle sizes. The obtained particles had a quasi-spherical shape with sizes ranging from 0.42 to 1.32 μm. Moreover, the bioactivity of the generated particles was assessed and large contents of phenolic compounds with a high antioxidant activity were measured. The particles were also subjected to in vitro studies against oxidative stress. The myrtle particles demonstrated cytoprotective properties when applied at low concentrations (1 μM) to macrophage cell lines.

| S-EPMC9951993 | biostudies-literature

Fucoxanthin and Polyunsaturated Fatty Acids Co-Extraction by a Green Process.

Project description:By their autotrophic nature and their molecular richness, microalgae are serious assets in the context of current environmental and societal challenges. Some species produce both omega-3 long chain polyunsaturated fatty acids (PUFAs) and xanthophylls, two molecular families widely studied for their bioactivities in the fields of nutrition and cosmetics. Whereas most studies separately deal with the two families, synergies could be exploited with extracts containing both PUFAs and xanthophylls. The purpose of our work was to determine cost effective and eco-friendly parameters for their co-extraction. The effect of several parameters (solvent, solvent/biomass ratio, temperature, duration) were studied, using two microalgal species, the non-calcifying Haptophyta Tisochrysis lutea, and the diatom Phaeodactylum tricornutum, that presents a silicified frustule. Analyses of PUFAs and fucoxanthin (Fx), the main xanthophyll, allowed to compare kinetics and extraction yields between experimental protocols. Co-extraction yields achieved using 96% ethanol as solvent were 100% for Fx and docosahexaenoic acid (DHA) in one hour from T. lutea biomass, and respectively 95% and 89% for Fx and eicosapentaenoic acid (EPA) in eight hours from P. tricornutum. These conditions are compatible with industrial applications.

| S-EPMC6017215 | biostudies-literature

Utilizing Supercritical CO2 for Bee Brood Oil Extraction and Analysis of Its Chemical Properties.

Project description:To obtain oil from bee brood, which was dried using a tray drying method, this study used the supercritical CO2 extraction method. Extraction occurred at temperatures between 40-60 °C and low pressures of 180-220 bar for 1.5 h, with a high pressure of 600 bar for 1 h. The study investigated both the yield and chemical properties of the extracted bee brood oils. Supercritical CO2 extraction of tray-dried bee brood at 600 bar pressure demonstrated higher oil extraction efficiency compared to lower pressures (180-220 bar). At temperatures of 40-60 °C, total phenolic compounds increased while total flavonoids decreased. The extracted oil exhibited antioxidant activity, primarily due to quercetin. Despite decreased acid, iodine, and saponification values, peroxide value slightly increased but remained below 12 meqO2/kg of oil. The make-up of the fatty acids changed. At 600 bar, palmitic and oleic acids were the most common, while myristic, linoleic, and docosadienoic acids decreased. At 600 bar, eicosadienoic acid was absent. The defatted bee brood retained significant essential and non-essential amino acids, indicating its potential for further development as a protein source.

| S-EPMC11354136 | biostudies-literature

Mediating oxidative stress enhances α-ionone biosynthesis and strain robustness during process scaling up.

Project description:Backgroundα-Ionone is highly valued in cosmetics and perfumery with a global usage of 100-1000 tons per year. Metabolic engineering by microbial fermentation offers a promising way to produce natural (R)-α-ionone in a cost-effective manner. Apart from optimizing the metabolic pathways, the approach is also highly dependent on generating a robust strain which retains productivity during the scale-up process. To our knowledge, no study has investigated strain robustness while increasing α-ionone yield.ResultsBuilt on our previous work, here, we further increased α-ionone yield to 11.4 mg/L/OD in 1 mL tubes by overexpressing the bottleneck dioxygenase CCD1 and re-engineering the pathway, which is > 65% enhancement as compared to our previously best strain. However, the yield decreased greatly to 2.4 mg/L/OD when tested in 10 mL flasks. Further investigation uncovered an unexpected inhibition that excessive overexpression of CCD1 was accompanied with increased hydrogen peroxide (H2O2) production. Excessive H2O2 broke down lycopene, the precursor to α-ionone, leading to the decrease in α-ionone production in flasks. This proved that expressing too much CCD1 can lead to reduced production of α-ionone, despite CCD1 being the rate-limiting enzyme. Overexpressing the alkyl hydroperoxide reductase (ahpC/F) partially solved this issue and improved α-ionone yield to 5.0 mg/L/OD in flasks by reducing oxidative stress from H2O2. The strain exhibited improved robustness and produced ~ 700 mg/L in 5L bioreactors, the highest titer reported in the literature.ConclusionOur study provides an insight on the importance of mediating the oxidative stress to improve strain robustness and microbial production of α-ionone during scaling up. This new strategy may be inspiring to the biosynthesis of other high-value apocarotenoids such as retinol and crocin, in which oxygenases are also involved.

| S-EPMC9686065 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data