Dataset Information

Estimation of Soil-Water Characteristic Curves in Multiple-Cycles Using Membrane and TDR System.

ABSTRACT: The objective of this study is to estimate multiple-cycles of the soil-water characteristic curve (SWCC) using an innovative volumetric pressure plate extractor (VPPE), which is incorporated with a membrane and time domain reflectometry (TDR). The pressure cell includes the membrane to reduce the experimental time and the TDR probe to automatically estimate the volumetric water content. For the estimation of SWCC using the VPPE system, four specimens with different grain size and void ratio are prepared. The volumetric water contents of the specimens according to the matric suction are measured by the burette system and are estimated in the TDR system during five cycles of SWCC tests. The volumetric water contents estimated by the TDR system are almost identical to those determined by the burette system. The experimental time significantly decreases with the new VPPE. The hysteresis in the SWCC is largest in the first cycle and is nearly identical after 1.5 cycles. As the initial void ratio decreases, the air entry value increases. This study suggests that the new VPPE may effectively estimate multiple-cycles of the SWCC of unsaturated soils.

SUBMITTER: Hong WT

PROVIDER: S-EPMC5456963 | biostudies-other | 2016 Dec

REPOSITORIES: biostudies-other

ACCESS DATA

Similar Datasets

Project description:BACKGROUND:Despite some advances, cardiovascular disease (CVD) remains the leading cause of death and healthcare costs in the United States. We therefore developed a comprehensive CVD policy simulation model that identifies cost-effective approaches for reducing CVD burden. This paper aims to: 1) describe our model in detail; and 2) perform model validation analyses. METHODS:The model simulates 1,000,000 adults (ages 35 to 80 years) using a variety of CVD-related epidemiological data, including previously calibrated Framingham-based risk scores for coronary heart disease and stroke. We validated our microsimulation model using recent National Health and Nutrition Examination Survey (NHANES) data, with baseline values collected in 1999-2000 and cause-specific mortality follow-up through 2011. Model-based (simulated) results were compared to observed all-cause and CVD-specific mortality data (from NHANES) for the same starting population using survival curves and, in a method not typically used for disease model validation, receiver operating characteristic (ROC) curves. RESULTS:Observed 10-year all-cause mortality in NHANES v. the simulation model was 11.2% (95% CI, 10.3% to 12.2%) v. 10.9%; corresponding results for CVD mortality were 2.2% (1.8% to 2.7%) v. 2.6%. Areas under the ROC curves for model-predicted 10-year all-cause and CVD mortality risks were 0.83 (0.81 to 0.85) and 0.84 (0.81 to 0.88), respectively; corresponding results for 5-year risks were 0.80 (0.77 to 0.83) and 0.81 (0.75 to 0.87), respectively. LIMITATIONS:The model is limited by the uncertainties in the data used to estimate its input parameters. Additionally, our validation analyses did not include non-fatal CVD outcomes due to NHANES data limitations. CONCLUSIONS:The simulation model performed well in matching to observed nationally representative longitudinal mortality data. ROC curve analysis, which has been traditionally used for risk prediction models, can also be used to assess discrimination for disease simulation models.

Project description:BackgroundBovine tuberculosis (BTB) today primarily affects developing countries. In Africa, the disease is present essentially on the whole continent; however, little accurate information on its distribution and prevalence is available. Also, attempts to evaluate diagnostic tests for BTB in naturally infected cattle are scarce and mostly complicated by the absence of knowledge of the true disease status of the tested animals. However, diagnostic test evaluation in a given setting is a prerequisite for the implementation of local surveillance schemes and control measures.Methodology/principal findingsWe subjected a slaughterhouse population of 954 Chadian cattle to single intra-dermal comparative cervical tuberculin (SICCT) testing and two recently developed fluorescence polarization assays (FPA). Using a Bayesian modeling approach we computed the receiver operating characteristic (ROC) curve of each diagnostic test, the true disease prevalence in the sampled population and the disease status of all sampled animals in the absence of knowledge of the true disease status of the sampled animals. In our Chadian setting, SICCT performed better if the cut-off for positive test interpretation was lowered from >4 mm (OIE standard cut-off) to >2 mm. Using this cut-off, SICCT showed a sensitivity and specificity of 66% and 89%, respectively. Both FPA tests showed sensitivities below 50% but specificities above 90%. The true disease prevalence was estimated at 8%. Altogether, 11% of the sampled animals showed gross visible tuberculous lesions. However, modeling of the BTB disease status of the sampled animals indicated that 72% of the suspected tuberculosis lesions detected during standard meat inspections were due to other pathogens than Mycobacterium bovis.Conclusions/significanceOur results have important implications for BTB diagnosis in a high incidence sub-Saharan African setting and demonstrate the practicability of our Bayesian approach for diagnostic test evaluation.

Dataset Information

Estimation of Soil-Water Characteristic Curves in Multiple-Cycles Using Membrane and TDR System.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets