Modelling of Granular Fracture in Polycrystalline Materials Using Ordinary State-Based Peridynamics.
Ontology highlight
ABSTRACT:
SUBMITTER: Zhu N
PROVIDER: S-EPMC5456998 | biostudies-other | 2016 Dec
REPOSITORIES: biostudies-other
Similar Datasets
Project description:This study develops an ordinary state-based peridynamic coarse-graining (OSPD-CG) model for the investigation of fracture in single-layer graphene sheets (SLGS), in which the peridynamic (PD) parameters are derived through combining the PD model and molecular dynamics (MD) simulations from the fully atomistic system via energy conservation. The fracture failure of pre-cracked SLGS under uniaxial tension is studied using the proposed PD model. And the PD simulation results agree well with those from MD simulations, including the stress-strain relations, the crack propagation patterns and the average crack propagation velocities. The interaction effect between cracks located at the centre and the edge on the crack propagation of the pre-cracked SLGS is discussed in detail. This work shows that the proposed PD model is much more efficient than the MD simulations and, thus, indicates that the PD-based method is applicable to study larger nanoscale systems.
| S-EPMC6189601 | biostudies-literature
Project description:The behaviour of a granular material is mainly dependent on its frictional properties, angle of internal friction, and cohesion, which, together with material density, are the key factors to be considered during the scaling procedure of analogue models. The frictional properties of a granular material are usually investigated by means of technical instruments such as a Hubbert-type apparatus and ring shear testers, which allow for investigating the response of the tested material to a wide range of applied stresses. Here we explore the possibility to determine material properties by means of different empirical methods applied to mixtures of quartz and K-feldspar sand. Empirical methods exhibit the great advantage of measuring the properties of a certain analogue material under the experimental conditions, which are strongly sensitive to the handling techniques. Finally, the results obtained from the empirical methods have been compared with ring shear tests carried out on the same materials, which show a satisfactory agreement with those determined empirically.
| S-EPMC5554016 | biostudies-other
Project description:Abstract A variety of image generation methods have emerged in recent years, notably DALL-E 2, Imagen and Stable Diffusion. While they have been shown to be capable of producing photorealistic images from text prompts facilitated by generative diffusion models conditioned on language input, their capacity for materials design has not yet been explored. Here, we use a trained Stable Diffusion model and consider it as an experimental system, examining its capacity to generate novel material designs especially in the context of 3D material architectures. We demonstrate that this approach offers a paradigm to generate diverse material patterns and designs, using human-readable language as input, allowing us to explore a vast nature-inspired design portfolio for both novel architectured materials and granular media. We present a series of methods to translate 2D representations into 3D data, including movements through noise spaces via mixtures of text prompts, and image conditioning. We create physical samples using additive manufacturing and assess material properties of materials designed via a coarse-grained particle simulation approach. We present case studies using images as starting point for material generation; exemplified in two applications. First, a design for which we use Haeckel’s classic lithographic print of a diatom, which we amalgamate with a spider web. Second, a design that is based on the image of a flame, amalgamating it with a hybrid of a spider web and wood structures. These design approaches result in complex materials forming solids or granular liquid-like media that can ultimately be tuned to meet target demands.
| S-EPMC9767007 | biostudies-literature
Project description:The motion and mixing of granular media are observed in several contexts in nature, often displaying striking similarities to liquids. Granular dynamics occur in geological phenomena and also enable technologies ranging from pharmaceuticals production to carbon capture. Here, we report the discovery of a family of gravitational instabilities in granular particle mixtures subject to vertical vibration and upward gas flow, including a Rayleigh-Taylor (RT)-like instability in which lighter grains rise through heavier grains in the form of "fingers" and "granular bubbles." We demonstrate that this RT-like instability arises due to a competition between upward drag force increased locally by gas channeling and downward contact forces, and thus the physical mechanism is entirely different from that found in liquids. This gas channeling mechanism also generates other gravitational instabilities: the rise of a granular bubble which leaves a trail of particles behind it and the cascading branching of a descending granular droplet. These instabilities suggest opportunities for patterning within granular mixtures.
| S-EPMC6511034 | biostudies-literature
Project description:Oxidation states (OS) are the charges on atoms due to electrons gained or lost upon applying an ionic approximation to their bonds. As a fundamental property, OS has been widely used in charge-neutrality verification, crystal structure determination, and reaction estimation. Currently, only heuristic rules exist for guessing the oxidation states of a given compound with many exceptions. Recent work has developed machine learning models based on heuristic structural features for predicting the oxidation states of metal ions. However, composition-based oxidation state prediction still remains elusive so far, which has significant implications for the discovery of new materials for which the structures have not been determined. This work proposes a novel deep learning-based BERT transformer language model BERTOS for predicting the oxidation states for all elements of inorganic compounds given only their chemical composition. This model achieves 96.82% accuracy for all-element oxidation states prediction benchmarked on the cleaned ICSD dataset and achieves 97.61% accuracy for oxide materials. It is also demonstrated how it can be used to conduct large-scale screening of hypothetical material compositions for materials discovery.
| S-EPMC10558692 | biostudies-literature
Project description:Raman microspectroscopy provides the means to obtain local orientations on polycrystalline materials at the submicrometer level. The present work demonstrates how orientation-distribution maps composed of Raman intensity distributions can be acquired on large areas of several hundreds of square micrometers. A polycrystalline CuInSe2 thin film was used as a model system. The orientation distributions are evidenced by corresponding measurements using electron backscatter diffraction (EBSD) on the same identical specimen positions. The quantitative, local orientation information obtained by means of EBSD was used to calculate the theoretical Raman intensities for specific grain orientations, which agree well with the experimental values. The presented approach establishes new horizons for Raman microspectroscopy as a tool for quantitative, microstructural analysis at submicrometer resolution.
| S-EPMC4682063 | biostudies-literature
Project description:A feed-forward neural-network-based model is presented to index, in real time, the diffraction spots recorded during synchrotron X-ray Laue microdiffraction experiments. Data dimensionality reduction is applied to extract physical 1D features from the 2D X-ray diffraction Laue images, thereby making it possible to train a neural network on the fly for any crystal system. The capabilities of the LaueNN model are illustrated through three examples: a two-phase nano-structure, a textured high-symmetry specimen deformed in situ and a polycrystalline low-symmetry material. This work provides a novel way to efficiently index Laue spots in simple and complex recorded images in <1 s, thereby opening up avenues for the realization of real-time analysis of synchrotron Laue diffraction data.
| S-EPMC9348891 | biostudies-literature
Project description:Segregation and mixing of size multidisperse granular materials remain challenging problems in many industrial applications. In this paper, we apply a continuum-based model that captures the effects of segregation, diffusion and advection for size tridisperse granular flow in quasi-two-dimensional chute flow. The model uses the kinematics of the flow and other physical parameters such as the diffusion coefficient and the percolation length scale, quantities that can be determined directly from experiment, simulation or theory and that are not arbitrarily adjustable. The predictions from the model are consistent with experimentally validated discrete element method (DEM) simulations over a wide range of flow conditions and particle sizes. The degree of segregation depends on the Péclet number, Pe, defined as the ratio of the segregation rate to the diffusion rate, the relative segregation strength ?ij between particle species i and j, and a characteristic length L, which is determined by the strength of segregation between smallest and largest particles. A parametric study of particle size, ?ij , Pe and L demonstrates how particle segregation patterns depend on the interplay of advection, segregation and diffusion. Finally, the segregation pattern is also affected by the velocity profile and the degree of basal slip at the chute surface. The model is applicable to different flow geometries, and should be easily adapted to segregation driven by other particle properties such as density and shape.
| S-EPMC5897752 | biostudies-literature
Project description:Architecting grain crystallographic orientation can modulate charge distribution and chemomechanical properties for enhancing the performance of polycrystalline battery materials. However, probing the interplay between charge distribution, grain crystallographic orientation, and performance remains a daunting challenge. Herein, we elucidate the spatially resolved charge distribution in lithium layered oxides with different grain crystallographic arrangements and establish a model to quantify their charge distributions. While the holistic "surface-to-bulk" charge distribution prevails in polycrystalline particles, the crystallographic orientation-guided redox reaction governs the charge distribution in the local charged nanodomains. Compared to the randomly oriented grains, the radially aligned grains exhibit a lower cell polarization and higher capacity retention upon battery cycling. The radially aligned grains create less tortuous lithium ion pathways, thus improving the charge homogeneity as statistically quantified from over 20 million nanodomains in polycrystalline particles. This study provides an improved understanding of the charge distribution and chemomechanical properties of polycrystalline battery materials.
| S-EPMC6949258 | biostudies-literature
Project description:We conducted extensive molecular dynamics simulations to investigate the thermal conductivity of polycrystalline hexagonal boron-nitride (h-BN) films. To this aim, we constructed large atomistic models of polycrystalline h-BN sheets with random and uniform grain configuration. By performing equilibrium molecular dynamics (EMD) simulations, we investigated the influence of the average grain size on the thermal conductivity of polycrystalline h-BN films at various temperatures. Using the EMD results, we constructed finite element models of polycrystalline h-BN sheets to probe the thermal conductivity of samples with larger grain sizes. Our multiscale investigations not only provide a general viewpoint regarding the heat conduction in h-BN films but also propose that polycrystalline h-BN sheets present high thermal conductivity comparable to monocrystalline sheets.
| S-EPMC4541169 | biostudies-other