Three-Dimensional Network Model for Coupling of Fracture and Mass Transport in Quasi-Brittle Geomaterials.
Ontology highlight
ABSTRACT:
SUBMITTER: Grassl P
PROVIDER: S-EPMC5457050 | biostudies-other | 2016 Sep
REPOSITORIES: biostudies-other
Similar Datasets
Project description:The fracture behaviors of quasi-brittle materials are commonly specimen size (size effect) and crack size (boundary effect) dependent. In this study, a new failure model is developed for characterizing the size and boundary effects. The derivative of the energy release rate is firstly introduced to predict the nominal strength dominated by the strength mechanism. Combined with the energy criterion for the energy mechanism, an asymptotic model is developed to capture the effect of any crack size on the nominal strength, and its expression for geometrically similar specimens is also established, which is able to characterize the size effect. Detailed comparisons of the proposed model with the size effect law and the boundary effect model are performed, respectively. The nominal strength predictions based on the proposed model are validated with the experimental results of cracked three-point bending beam specimens made of concrete, of limestone and of hardened cement paste and compared with the model predictions given by the size effect law and the boundary effect model.
| S-EPMC5457011 | biostudies-other
Project description:Purpose:Quantitative understanding of the transport of therapeutic macromolecules following intraocular injections is critical for the design of efficient strategies in treating eye diseases, such as neovascular (wet) age-related macular degeneration (AMD) and macular edema (ME). Antiangiogenic treatments, such as neutralizing antibodies against VEGF or recently characterized antiangiogenic peptides, have shown promise in slowing disease progression. Methods:We developed a comprehensive three-dimensional (3D) transport model for intraocular injections using published data on drug distribution in rabbit eyes following intravitreal and suprachoroidal (SC) injection of sodium fluorescein (SF), bevacizumab, and ranibizumab. The model then was applied to evaluate the distribution of small molecules and antiangiogenic proteins following intravitreal and SC injections in human eyes. Results:The model predicts that intravitreally administered molecules are substantially mixed within the vitreous following injection, and that the long-term behavior of the injected drug does not depend on the initial mixing. Ocular pharmacokinetics of different drugs is sensitive to different clearance mechanisms. Effective retinal drug delivery is impacted by RPE permeability. For VEGF antibody, intravitreal injection provides sustained delivery to the retina, whereas SC injection provides more efficient, but short-lived, retinal delivery for smaller-sized molecules. Long-term suppression of neovascularization through SC administration of antiangiogenic drugs necessitates frequent injection or sustained delivery, such as microparticle-based delivery of antiangiogenic peptides. Conclusions:A comprehensive 3D model for intravitreal and SC drug injection is developed to provide a framework and platform for testing drug delivery routes and sustained delivery devices for new and existing drugs.
| S-EPMC6207998 | biostudies-literature
Project description:Extracellular matrix (ECM) strongly influences cellular behaviors, including cell proliferation, adhesion, and particularly migration. In cancer, the rigidity of the stromal collagen environment is thought to control tumor aggressiveness, and collagen alignment has been linked to tumor cell invasion. While the mechanical properties of collagen at both the single fiber scale and the bulk gel scale are quite well studied, how the fiber network responds to local stress or deformation, both structurally and mechanically, is poorly understood. This intermediate scale knowledge is important to understanding cell-ECM interactions and is the focus of this study. We have developed a three-dimensional elastic collagen fiber network model (bead-and-spring model) and studied fiber network behaviors for various biophysical conditions: collagen density, crosslinker strength, crosslinker density, and fiber orientation (random vs. prealigned). We found the best-fit crosslinker parameter values using shear simulation tests in a small strain region. Using this calibrated collagen model, we simulated both shear and tensile tests in a large linear strain region for different network geometry conditions. The results suggest that network geometry is a key determinant of the mechanical properties of the fiber network. We further demonstrated how the fiber network structure and mechanics evolves with a local formation, mimicking the effect of pulling by a pseudopod during cell migration. Our computational fiber network model is a step toward a full biomechanical model of cellular behaviors in various ECM conditions.
| S-EPMC4227658 | biostudies-literature
Project description:BackgroundAvailable research about the anatomic patterns of intertrochanteric fractures is lacking, and fracture mapping has not previously been performed on intertrochanteric fractures. This study aimed to determine the major trajectories of intertrochanteric fracture lines using computed tomography data from a series of surgically treated patients.MethodsIn this study, 504 patients with intertrochanteric fractures were retrospectively analyzed. Fracture patterns were graded according to Arbeitsgemeinschaft für Osteosynthesefragen (AO) classification. Fracture lines were transcribed onto proximal femoral templates and graphically superimposed to create a compilation of fracture maps that were subsequently divided into anterior, posterior, lateral, and medial fracture maps to create a three-dimensional (3D) pattern by reducing fragments in the 3D models. The fracture maps were then converted into frequency spectra. The major fracture patterns were assessed by focusing on the lateral femoral wall, lesser trochanter, intertrochanteric crest, and inner cortical buttress.ResultsAnterior, posterior, lateral, and medial fracture maps were created. The majority of fracture lines (85.9%, 433/504) on the anterior maps were along the intertrochanteric line where the iliofemoral ligament was attached. In the medial plane, the majority of fracture lines (49.0%, 247/504) shown on the frequency spectrum included the turning point involving the third quadrant. In the posterior plane, the majority of fracture lines (52.0%, 262/504) involved the intertrochanteric crest from the greater to the lesser trochanter. In the lateral plane, the majority of fracture lines (62.7%, 316/504) involved the greater trochanter at the gluteus medius attachment.ConclusionsThe fracture patterns observed in the present study might be used to describe morphologic characteristics and aid with management strategies. Further classifications or modifications that incorporate the fracture patterns identified in this study may be used in future research.
| S-EPMC6846262 | biostudies-literature
Project description:Recent studies have revealed that Ca(2+) not only regulates the contraction of cardiomyocytes, but can also function as a signaling agent to stimulate ATP production by the mitochondria. However, the spatiotemporal resolution of current experimental techniques limits our investigative capacity to understand this phenomenon. Here, we created a detailed three-dimensional (3D) cardiomyocyte model to study the subcellular regulatory mechanisms of myocardial energetics. The 3D cardiomyocyte model was based on the finite-element method, with detailed subcellular structures reproduced, and it included all elementary processes involved in cardiomyocyte electrophysiology, contraction, and ATP metabolism localized to specific loci. The simulation results were found to be reproducible and consistent with experimental data regarding the spatiotemporal pattern of cytosolic, intrasarcoplasmic-reticulum, and mitochondrial changes in Ca(2+); as well as changes in metabolite levels. Detailed analysis suggested that although the observed large cytosolic Ca(2+) gradient facilitated uptake by the mitochondrial Ca(2+) uniporter to produce cyclic changes in mitochondrial Ca(2+) near the Z-line region, the average mitochondrial Ca(2+) changes slowly. We also confirmed the importance of the creatine phosphate shuttle in cardiac energy regulation. In summary, our 3D model provides a powerful tool for the study of cardiac function by overcoming some of the spatiotemporal limitations of current experimental approaches.
| S-EPMC3297787 | biostudies-literature
Project description:Significant progress has been accomplished in the development of experimental contact-mode and dynamic-mode atomic force microscopy (AFM) methods designed to measure surface material properties. However, current methods are based on one-dimensional (1D) descriptions of the tip-sample interaction forces, thus neglecting the intricacies involved in the material behavior of complex samples (such as soft viscoelastic materials) as well as the differences in material response between the surface and the bulk. In order to begin to address this gap, a computational study is presented where the sample is simulated using an enhanced version of a recently introduced model that treats the surface as a collection of standard-linear-solid viscoelastic elements. The enhanced model introduces in-plane surface elastic forces that can be approximately related to a two-dimensional (2D) Young's modulus. Relevant cases are discussed for single- and multifrequency intermittent-contact AFM imaging, with focus on the calculated surface indentation profiles and tip-sample interaction force curves, as well as their implications with regards to experimental interpretation. A variety of phenomena are examined in detail, which highlight the need for further development of more physically accurate sample models that are specifically designed for AFM simulation. A multifrequency AFM simulation tool based on the above sample model is provided as supporting information.
| S-EPMC4901551 | biostudies-literature
Project description:Vortex beams have a typical characteristic of orbital angular momentum, which provides a new degree of freedom for information processing in remote communication and a form of non-contact manipulation for trapping particles. In acoustics, vortex beams are generally observed on the surface of a metamaterial structure or in a waveguide with a hard boundary owing to the characteristic of easy diffusion in free space. The realization of an acoustic vortex beam with a long-distance propagation in free space still remains a challenge. To overcome this, we report a type of acoustic Bessel vortex (ABV) beam created by a quasi-three-dimensional reflected metasurface in free space based on phase modulation. By using the Bessel and vortex phase profiles, we can realize an ABV beam with the high performances of both Bessel and vortex beams, and its effective propagation distance is larger than 9.2λ in free space. Beyond that, we discuss the bandwidth and topological charge of the ABV beam in detail, and the fractional bandwidth can reach about 0.28. The proposed ABV beam has the advantages of a high-performance vortex, long-distance propagation, and broad bandwidth, which provide a new pathway for designing multifunctional vortex devices with promising applications.
| S-EPMC8623545 | biostudies-literature
Project description:Conventional education results in unsatisfactory morphological understanding of acetabular fractures due to lack of three-dimensional (3D) details and tactile feedback of real fractures. Virtual reality (VR) and 3D printing (3DP) techniques are widely applied in teaching. The purpose of this study was to identify the effect of physical model (PM), VR and 3DP models in education of morphological understanding of acetabular fractures. 141 students were invited to participate in this study. Participants were equally and randomly assigned to the PM, VR and 3DP learning groups. Three-level objective tests were conducted to evaluate learning, including identifying anatomical landmarks, describing fracture lines, identifying classification, and inferring fracture mechanism. Four subjective questions were asked to evaluate the usability and value of instructional materials. Generally, the 3DP group showed a clear advantage over the PM and VR groups in objective tests, while there was no significant difference between the PM and VR groups. 3DP was considered to be the most valuable learning tool for understanding acetabular fractures. The findings demonstrate that 3DP modelling of real fractures is an effective learning instrument that can be used to understand the morphology of acetabular fractures and promote subjective interest.
| S-EPMC5771611 | biostudies-literature
Project description:In this work we develop a complete analytical solution for a double cantilever beam (DCB) where the arms are modelled as Timoshenko beams, and a bi-linear cohesive-zone model (CZM) is embedded at the interface. The solution is given for two types of DCB; one with prescribed rotations (with steady-state crack propagation) and one with prescribed displacement (where the crack propagation is not steady state). Because the CZM is bi-linear, the analytical solutions are given separately in three phases, namely (i) linear-elastic behaviour before crack propagation, (ii) damage growth before crack propagation and (iii) crack propagation. These solutions are then used to derive the solutions for the case when the interface is linear-elastic with brittle failure (i.e. no damage growth before crack propagation) and the case with infinitely stiff interface with brittle failure (corresponding to linear-elastic fracture mechanics (LEFM) solutions). If the DCB arms are shear-deformable, our solution correctly captures the fact that they will rotate at the crack tip and in front of it even if the interface is infinitely stiff. Expressions defining the distribution of contact tractions at the interface, as well as shear forces, bending moments and cross-sectional rotations of the arms, at and in front of the crack tip, are derived for a linear-elastic interface with brittle failure and in the LEFM limit. For a DCB with prescribed displacement in the LEFM limit we also derive a closed-form expression for the critical energy release rate, Gc . This formula, compared to the so-called 'standard beam theory' formula based on the assumptions that the DCB arms are clamped at the crack tip (and also used in standards for determining fracture toughness in mode-I delamination), has an additional term which takes into account the rotation at the crack tip. Additionally, we provide all the mentioned analytical solutions for the case when the shear stiffness of the arms is infinitely high, which corresponds to Euler-Bernoulli beam theory. In the numerical examples we compare results for Euler-Beronulli and Timoshenko beam theory and analyse the influence of the CZM parameters.
| S-EPMC6383630 | biostudies-literature
Project description:It is generally difficult to predict fractures of low-permeability reservoirs under high confining pressures by data statistical method and simplified strain energy density method. In order to establish a series of geomechanical models for the prediction of multi-scale fractures in brittle tight sandstones, firstly, through a series of rock mechanics experiments and CT scanning, we determined 0.85 σc as the key thresholds for mass release of elastic strain energy and bursting of micro-fractures. A correlation between fracture volume density and strain energy density under uniaxial stress state was developed based on the Theory of Geomechanics. Then using the combined Mohr-Coulomb criterion and Griffith's criterion and considering the effect of filling degree in fractures, we continued to modify and deduce the mechanical models of fracture parameters under complex stress states. Finally, all the geomechanical equations were loaded into the finite element (FE) platform to quantitatively simulate the present-day 3-D distributions of fracture density, aperture, porosity, permeability and occurrence based on paleostructure restoration of the Keshen anticline. Its predictions agreed well with in-situ core observations and formation micro-imaging (FMI) interpretations. The prediction results of permeability were basically consistent with the unobstructed flow distributions before and after the reservoir reformation.
| S-EPMC6221284 | biostudies-literature