Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Nonionic Microemulsions as Solubilizers of Hydrophobic Drugs: Solubilization of Paclitaxel.

ABSTRACT: The strategy using nonionic microemulsion as a solubilizer for hydrophobic drugs was studied and is demonstrated in this work. The aqueous phase behaviors of mixed nonionic surfactants with various oils at 37 °C are firstly constructed to give the optimal formulations of nonionic microemulsions with applications in the enhanced solubilization of the model hydrophobic drug, paclitaxel, at 37 °C. Briefly, the suitable oil phase with paclitaxel significantly dissolved is microemulsified with appropriate surfactants. Surfactants utilized include Tween 80, Cremophor EL, and polyethylene glycol (4.3) cocoyl ether, while various kinds of edible oils and fatty esters are used as the oil phase. On average, the apparent solubility of paclitaxel is increased to ca. 70-100 ppm in the prepared microemulsions at 37 °C using tributyrin or ethyl caproate as the oil phases. The sizes of the microemulsions attained are mostly from ca. 60 nm to ca. 200 nm. The cytotoxicity of the microemulsion formulations is assessed with the cellular viability of 3T3 cells. In general, the cell viability is above 55% after 24 h of cultivation in media containing these microemulsion formulations diluted to a concentration of total surfactants equal to 50 ppm and 200 ppm.

SUBMITTER: Lo JT

PROVIDER: S-EPMC5457098 | biostudies-other | 2016 Sep

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Hemolytic and cellular toxicology of a sulfanilamide-based nonionic surfactant: a niosomal carrier for hydrophobic drugs.

Project description:Biocompatible surfactants are of diverse pharmaceutical interest due to their ability to self-assemble into nano-particulate systems which can be used for single-step drug loading, based upon the hydrophobic-hydrophobic interaction between a hydrophobic drug and the lipophilic part of a surfactant molecule. However, surfactants are associated with cytotoxicity and hemolysis due to their amphiphilic interaction with cellular membranes. This study reports a novel membrane-compatible surfactant, synthesized from sulfanilamide and its self-micellization into niosomes. The surfactant was synthesized in a single step reaction via the introduction of an alkyl chain in the sulfanilamide moiety by conjugation with deconyl chloride. The synthesized surfactant (S-SDC) was characterized by 1H and 13C NMR, mass spectrometry and single crystal XRD. The S-SDC niosomes were explored for drug delivery with clarithromycin as a model drug. The biocompatibility of the surfactant was investigated through hemolysis and cytotoxicity. The surfactant presented a very low critical micellar concentration (CMC) of 0.04 mM and entrapped 65% of the drug which was released in a sustained manner, over 12 h, at acidic and physiological pH. The vesicles were spherical in shape with 234 ± 3.61 nm mean diameter and a narrow size distribution. Niosomes were hemocompatible and nontoxic to cellular membrane. The results suggested the sulfanilamide based surfactant can be applied as a novel and cell membrane compatible niosomal drug delivery vehicle.

| S-EPMC6116827 | biostudies-other

Solubilization of Hydrophobic Catalysts Using Nanoparticle Hosts.

Project description:A modular strategy for the solubilization and protection of hydrophobic transition metal catalysts using the hydrophobic pockets of water soluble gold nanoparticles is reported. Besides preserving original catalyst activity, this encapsulation strategy provides a protective environment for the hydrophobic catalyst and brings reusability. This system provides a versatile platform for the encapsulation of different hydrophobic transition metal catalysts, allowing a wide range of catalysis in water while uniting the advantages of homogeneous and heterogeneous catalysis in the same system.

| S-EPMC5848072 | biostudies-literature

Microemulsions of Nonionic Surfactant with Water and Various Homologous Esters: Preparation, Phase Transitions, Physical Property Measurements, and Application for Extraction of Tricyclic Antidepressant Drugs from Aqueous Media.

Project description:Microemulsions are nanocolloidal systems composed of water, an oil, and a surfactant, sometimes with an additional co-surfactant, which have found a wide range of practical applications, including the extractive removal of contaminants from polluted water. In this study, microemulsion systems, including a nonionic surfactant (Brij 30), water, and esters selected from two homologous series of C1-C6 alkyl acetates and ethyl C1-C4 carboxylates, respectively, were prepared by the surfactant titration method. Phase transitions leading to the formation of Winsor II and Winsor IV microemulsions were observed and phase diagrams were constructed. The dependences of phase transitions on the salinity and pH and the addition of isopropanol as a co-surfactant were also investigated. Some physical properties, namely density, refractive index, electrical conductivity, dynamic viscosity, and particle size, were measured for a selection of Winsor IV microemulsions, providing further insight into some other phase transitions occurring in the monophasic domains of phase diagrams. Finally, Winsor II microemulsions were tested as extraction solvents for the removal of four tricyclic antidepressant drugs from aqueous media. Propyl acetate/Brij 30/H2O microemulsions provided the best extraction yields (>90%), the highest Nernst distribution coefficients (~40-88), and a large volumetric ratio of almost 3 between the recovered purified water and the resulting microemulsion extract. Increasing the ionic strength (salinity) or the pH of the aqueous antidepressant solutions led to an improvement in extraction efficiencies, approaching 100%. These results could be extrapolated to other classes of pharmaceutical contaminants and suggest ester- and nonionic surfactant-based microemulsions are a promising tool for environmental remediation.

| S-EPMC10458553 | biostudies-literature

Nonionic Block Copolypeptide Micelles Containing a Hydrophobic racemic-Leucine Core.

Project description:Block copolymer micelles have been used extensively as carriers for therapeutic drugs and diagnostic molecules. Here, we report the synthesis of nonionic, block copolypeptides, K(P) (x)(rac-L)(y), which have a "reversed" rod-coil structure composed of a hydrophilic, rod-like, ?-helical segment attached to a disordered, racemic hydrophobic segment. The self assembly of these block copolypeptides in water was studied, and their compositions were optimized to identify a sample, K(P) (100)(rac-L)(10), which is able to form well defined micelles that are very stable against dilution, high temperatures, and various media. Micelle structure was determined using a combination of electron microscopy and dynamic light scattering measurements. The potential of these micelles as drug delivery carriers was evaluated by encapsulation of the anticancer drug camptothecin. The drug containing micelles were found to be stable.

| S-EPMC3099414 | biostudies-literature

Solubilization of Hydrophobic Dyes in Surfactant Solutions.

Project description:In this paper, the use of surfactants for solubilization of hydrophobic organic dyes (mainly solvent and disperse dyes) has been reviewed. The effect of parameters such as the chemical structures of the surfactant and the dye, addition of salt and of polyelectrolytes, pH, and temperature on dye solubilization has been discussed. Surfactant self-assemble into micelles in aqueous solution and below the concentration where this occurs-the critical micelle concentration (CMC)-there is no solubilization. Above the CMC, the amount of solubilized dye increases linearly with the increase in surfactant concentration. It is demonstrated that different surfactants work best for different dyes. In general, nonionic surfactants have higher solubilization power than anionic and cationic surfactants. It is likely that the reason for the good performance of nonionic surfactants is that they allow dyes to be accommodated not only in the inner, hydrocarbon part of the micelle but also in the headgroup shell. It is demonstrated that the location of a dye in a surfactant micelle can be assessed from the absorption spectrum of the dye-containing micellar solution.

| S-EPMC5452102 | biostudies-other

High Solubilization and Controlled Release of Paclitaxel Using Thermosponge Nanoparticles for Effective Cancer Therapy.

Project description:Cancer, which is a leading cause of death, contributes significantly to reducing life expectancy worldwide. Even though paclitaxel (PTX) is known as one of the main anticancer drugs, it has several limitations, including low solubility in aqueous solutions, a limited dosage range, an insufficient release amount, and patient resistance. To overcome these limitations, we suggest the development of PTX-loaded thermosponge nanoparticles (PTX@TNP), which result in improved anticancer effects, via a simple nanoprecipitation method, which allows the preparation of PTX@TNPs with hydrophobic interactions without any chemical conjugation. Further, to improve the drug content and yield of the prepared complex, the co-organic solvent ratio was optimized. Thus, it was observed that the drug release rate increased as the drug capacity of PTX@TNPs increased. Furthermore, increasing PTX loading led to considerable anticancer activity against multidrug resistance (MDR)-related colorectal cancer cells (HCT 15), implying a synergistic anticancer effect. These results suggest that the solubilization of high drug amounts and the controlled release of poorly water-soluble PTX using TNPs could significantly improve its anticancer therapy, particularly in the treatment of MDR-p-glycoprotein-overexpressing cancers.

| S-EPMC8398058 | biostudies-literature

Polyelectrolyte multilayer nanoshells with hydrophobic nanodomains for delivery of Paclitaxel.

Project description:Efficient and effective delivery of poorly water-soluble drug molecules, which constitute a large part of commercially available drugs, is a major challenge in the field of drug delivery. Several drugs including paclitaxel (PTX) which are used for cancer treatment are hydrophobic, exhibit poor aqueous solubility and need to be delivered using an appropriate carrier. In the present work, we engineered PTX-loaded polyelectrolyte films and microcapsules by pre-complexing PTX with chemically modified derivative of hyaluronic acid (alkylamino hydrazide) containing hydrophobic nanocavities, and subsequent assembly with either poly(l-lysine) (PLL) or quaternized chitosan (QCHI) as polycations. The PTX loading capacity of the films was found to be dependent on number of layers in the films as well as on the initial concentration of PTX pre-complexed to hydrophobic HA, with a loading capacity up to 5000-fold the initial PTX concentration. The films were stable in physiological medium and were degraded in the presence of hyaluronidase. The PTX-loaded microcapsules were found to decrease the viability and proliferation of MDA MB 231 breast cancer cells, while unloaded microcapsules did not impact cell viability. All together, our results highlight the potential of hyaluronan-based assemblies containing hydrophobic nanodomains for hydrophobic drug delivery.

| S-EPMC4111540 | biostudies-literature

Microemulsions vs chitosan derivative-coated microemulsions for dermal delivery of 8-methoxypsoralen.

Project description:Background8-methoxypsoralen (8-MOP) is one of the most commonly utilized drugs in psoralen-ultraviolet A therapy for treatment of vitiligo. However, poor skin retention and systemic side effects limit the clinical application of 8-MOP.MethodsMicroemulsions (MEs) and chitosan derivative-coated 8-MOP MEs were developed and compared for dermal delivery of 8-MOP. Ex vivo skin retention/permeation study was performed to select the ME formulation with the highest retention:permeation ratio. Four different chitosan-coated MEs were prepared and compared with the ME formulation for their ability to distribute 8-MOP in the skin.ResultsAmong various ME formulations developed, a formulation containing 2.9% ethyl oleate, 17.2% Cromophor EL35, 8.6% ethanol and 71.3% water showed the highest ex vivo skin retention:permeation ratio (1.98). Of four chitosan-coated MEs prepared, carboxymethyl chitosan-coated MEs (CC-MEs) and hydroxypropyl chitosan-coated MEs (HC-MEs) showed higher ex vivo skin retention:permeation ratio (1.46 and 1.84). and were selected for in vivo pharmacokinetic study. AUCskin (0-12 h) for 8-MOP MEs (4578.56 h·ng·mL-1) was higher than HC-MEs (3422.47 h·ng·mL-1), CC-MEs (2808.51 h·ng·mL-1) and tincture (1500.16 h·ng·mL-1). Also, AUCplasma (0-12 h) for MEs (39.35±13.90 h·ng·mL-1) was significantly lower than HC-MEs (66.32 h·ng·mL-1), CC-MEs (59.70 h·ng·mL-1) and tincture (73.02 h·ng·mL-1).ConclusionThese combined results suggested that the MEs developed could be a promising and safe alternative for targeted skin delivery of 8-MOP.

| S-EPMC6448538 | biostudies-literature

Synthesis of uniform cyclodextrin thioethers to transport hydrophobic drugs.

Project description:Methyl and ethyl thioether groups were introduced at all primary positions of ?-, ?-, and ?-cyclodextrin by nucleophilic displacement reactions starting from the corresponding per-(6-deoxy-6-bromo)cyclodextrins. Further modification of all 2-OH positions by etherification with iodo terminated triethylene glycol monomethyl ether (and tetraethylene glycol monomethyl ether, respectively) furnished water-soluble hosts. Especially the ?-cyclodextrin derivatives exhibit very high binding potentials towards the anaesthetic drugs sevoflurane and halothane. Since the resulting inclusion compounds are highly soluble in water at temperatures ?37 °C they are good candidates for new aqueous dosage forms which would avoid inhalation anaesthesia.

| S-EPMC4273231 | biostudies-literature

A smart viral vector for targeted delivery of hydrophobic drugs.

Project description:Targeted delivery of hydrophobic chemotherapeutic drugs to tumor cells remains a fundamental problem in cancer therapy. Effective encapsulation of hydrophobic drugs in nano-vehicles can improve their pharmacokinetics, bioavailability and prevent off-target localization. We have devised a method for easy chemical conjugation and multivalent display of a tumor-homing peptide to virus-like particles of a non-mammalian virus, Flock House Virus (FHV), to engineer it into a smart vehicle for targeted delivery of hydrophobic drugs. This conjugation method provides dual functionalization to the VLPs, first, a 2 kDa PEG spacer arm shields VLPs from immune reactivity, and second, attachment of the tumor homing peptide tLyP-1 chauffeurs the encapsulated hydrophobic drugs to target cells. The fortuitous affinity of the FHV capsid towards hydrophobic molecules, and dependence on Ca2+ for maintaining a stable capsid shell, were utilized for incorporation of hydrophobic drugs-doxorubicin and ellipticine-in tLyP-1 conjugated VLPs. The drug release profile from the VLP was observed to be gradual, and strictly endosomal pH dependent. We propose that this accessible platform empowers surface functionalization of VLP with numerous ligands containing terminal cysteines, for generating competent delivery vehicles, antigenic display and other biomedical applications.

| S-EPMC8007742 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data