A Multi-Level Decision Fusion Strategy for Condition Based Maintenance of Composite Structures.
Ontology highlight
ABSTRACT:
SUBMITTER: Sharif Khodaei Z
PROVIDER: S-EPMC5457114 | biostudies-other | 2016 Sep
REPOSITORIES: biostudies-other
Similar Datasets
Project description:This paper presents a novel approach to substantially improve the detection accuracy of structural damage via a one-dimensional convolutional neural network (1-D CNN) and a decision-level fusion strategy. As structural damage usually induces changes in the dynamic responses of a structure, a CNN can effectively extract structural damage information from the vibration signals and classify them into the corresponding damage categories. However, it is difficult to build a large-scale sensor system in practical engineering; the collected vibration signals are usually non-synchronous and contain incomplete structure information, resulting in some evident errors in the decision stage of the CNN. In this study, the acceleration signals of multiple acquisition points were obtained, and the signals of each acquisition point were used to train a 1-D CNN, and their performances were evaluated by using the corresponding testing samples. Subsequently, the prediction results of all CNNs were fused (decision-level fusion) to obtain the integrated detection results. This method was validated using both numerical and experimental models and compared with a control experiment (data-level fusion) in which all the acceleration signals were used to train a CNN. The results confirmed that: by fusing the prediction results of multiple CNN models, the detection accuracy was significantly improved; for the numerical and experimental models, the detection accuracy was 10% and 16-30%, respectively, higher than that of the control experiment. It was demonstrated that: training a CNN using the acceleration signals of each acquisition point and making its own decision (the CNN output) and then fusing these decisions could effectively improve the accuracy of damage detection of the CNN.
| S-EPMC8226517 | biostudies-literature
Project description:This article focuses on the fusion of flaw indications from multi-sensor nondestructive materials testing. Because each testing method makes use of a different physical principle, a multi-method approach has the potential of effectively differentiating actual defect indications from the many false alarms, thus enhancing detection reliability. In this study, we propose a new technique for aggregating scattered two- or three-dimensional sensory data. Using a density-based approach, the proposed method explicitly addresses localization uncertainties such as registration errors. This feature marks one of the major of advantages of this approach over pixel-based image fusion techniques. We provide guidelines on how to set all the key parameters and demonstrate the technique's robustness. Finally, we apply our fusion approach to experimental data and demonstrate its capability to locate small defects by substantially reducing false alarms under conditions where no single-sensor method is adequate.
| S-EPMC4732138 | biostudies-literature
Project description:In this work, a framework is proposed for decision fusion utilizing features extracted from vehicle images and their detected wheels. Siamese networks are exploited to extract key signatures from pairs of vehicle images. Our approach then examines the extent of reliance between signatures generated from vehicle images to robustly integrate different similarity scores and provide a more informed decision for vehicle matching. To that end, a dataset was collected that contains hundreds of thousands of side-view vehicle images under different illumination conditions and elevation angles. Experiments show that our approach could achieve better matching accuracy by taking into account the decisions made by a whole-vehicle or wheels-only matching network.
| S-EPMC9002690 | biostudies-literature
Project description:The identification of gene regulatory modules is an important yet challenging problem in computational biology. While many computational methods have been proposed to identify regulatory modules, their initial success is largely compromised by a high rate of false positives, especially when applied to human cancer studies. New strategies are needed for reliable regulatory module identification. We present a new approach, namely multi-level support vector regression (ml-SVR), to systematically identify conditionspecific regulatory modules. The approach is built upon a multi-level analysis strategy designed for suppressing false positive predictions. With this strategy, a regulatory module becomes ever more significant as more relevant gene sets are formed at finer levels. At each level, a two-stage support vector regression (SVR) method is utilized to help reduce false positive predictions by integrating binding motif information and gene expression data; a significant analysis procedure is followed to assess the significance of each regulatory module. We applied our method to breast cancer cell line data to identify condition-specific regulatory modules associated with estrogen treatment. Experimental results show that our method can identify biologically meaningful regulatory modules related to estrogen signaling and action in breast cancer. Three independent total RNA samples were extracted for each cell line (MCF-7 and MCF-7-stripped) and the samples were arrayed using Affymetrix GeneChip HG-U133A. MCF-7-stripped denotes estrogen-deprived MCF-7 human breast cancer cells, which were grown in the absence of estrogen for 96 hours. We analyzed the enriched motifs and their targets for the genes significantly down-regulated in MCF-7-stripped cells as compared to MCF-7 cells.
| S-ECPF-GEOD-20700 | biostudies-other
Project description:Thermophilic proteins have important application value in biotechnology and industrial processes. The correct identification of thermophilic proteins provides important information for the application of these proteins in engineering. The identification method of thermophilic proteins based on biochemistry is laborious, time-consuming, and high cost. Therefore, there is an urgent need for a fast and accurate method to identify thermophilic proteins. Considering this urgency, we constructed a reliable benchmark dataset containing 1,368 thermophilic and 1,443 non-thermophilic proteins. A multi-layer perceptron (MLP) model based on a multi-feature fusion strategy was proposed to discriminate thermophilic proteins from non-thermophilic proteins. On independent data set, the proposed model could achieve an accuracy of 96.26%, which demonstrates that the model has a good application prospect. In order to use the model conveniently, a user-friendly software package called iThermo was established and can be freely accessed at http://lin-group.cn/server/iThermo/index.html. The high accuracy of the model and the practicability of the developed software package indicate that this study can accelerate the discovery and engineering application of thermally stable proteins.
| S-EPMC8902591 | biostudies-literature
Project description:To overcome the shortcomings of single or multi-wavelength ultraviolet-visible (UV-Vis) absorbance spectroscopic methods, fluorescence spectroscopic or wet chemistry methods for chemical oxygen demand (COD) measurement, an online detection method based on multi-source spectral feature-level fusion was developed and evaluated. In this method, UV-Vis absorbance spectra (deuterium-halogen lamp as light source) and fluorescence emission spectra (405 nm wavelength laser as excitation source) were measured online by a spectrophotometer (PG2000-Pro-Ex, Ocean Optics). Discrete wavelet transform (DWT) and a successive projections algorithm (SPA) were utilized to realize signal de-noising and feature extraction on the two types of spectra, respectively. Feature-level fusion and least-square support vector regression (LS-SVR) were used to establish the COD measurement model. Through comparison of experiments and results, it is shown that the proposed method has a good performance on both noise tolerance and measurement accuracy.
| S-EPMC9063000 | biostudies-literature
Project description:Traditional methods for obtaining soil heavy metal content are expensive, inefficient, and limited in monitoring range. In order to meet the needs of soil environmental quality evaluation and health status assessment, visible near-infrared spectroscopy and XRF spectroscopy for monitoring heavy metal content in soil have attracted much attention, because of their rapid, nondestructive, economical, and environmentally friendly features. The use of either of these spectra alone cannot meet the accuracy requirements of traditional measurements, while the synergistic use of the two spectra can further improve the accuracy of monitoring heavy metal lead content in soil. Therefore, this study applied various spectral transformations and preprocessing to vis-NIR and XRF spectra; used the whale optimization algorithm (WOA) and competitive adaptive re-weighted sampling (CARS) algorithms to identify feature spectra; designed a combination variable model (CVM) based on multi-layer spectral data fusion, which improved the spectral preprocessing and spectral feature screening process to increase the efficiency of spectral fusion; and established a quantitative model for soil Pb concentration using partial least squares regression (PLSR). The estimation performance of three spectral fusion strategies, CVM, outer-product analysis (OPA), and Granger-Ramanathan averaging (GRA), was discussed. The results showed that the accuracy and efficiency of the CARS algorithm in the fused spectra estimation model were superior to those of the WOA algorithm, with an average coefficient of determination (R2) value of 0.9226 and an average root mean square error (RMSE) of 0.1984. The accuracy of the estimation models established, based on the different spectral types, to predict the Pb content of the soil was ranked as follows: the CVM model > the XRF spectral model > the vis-NIR spectral model. Within the CVM fusion strategy, the estimation model based on CARS and PLSR (CARS_D1+D2) performed the best, with R2 and RMSE values of 0.9546 and 0.2035, respectively. Among the three spectral fusion strategies, CVM had the highest accuracy, OPA had the smallest errors, and GRA showed a more balanced performance. This study provides technical means for on-site rapid estimation of Pb content based on multi-source spectral fusion and lays the foundation for subsequent research on dynamic, real-time, and large-scale quantitative monitoring of soil heavy metal pollution using high-spectral remote sensing images.
| S-EPMC10538168 | biostudies-literature
Project description:Hierarchical SnO₂ nanocrystallites aggregates (NAs) were prepared with a simple room temperature⁻based aqueous solution method followed by simple freeze-drying treatment. The as-prepared SnO₂ NAs were subsequently combined with SnO₂ nanosheet⁻based structures from the viewpoint of a function-matching strategy, and under an optimized condition, a power conversion efficiency (PCE) of 5.59% was obtained for the resultant hybrid photoanode, a remarkable 60% enhancement compared to that of dye-sensitized solar cells (DSCs) fabricated with bare SnO₂ NAs architecture. The significantly enhanced efficiency can be attributed to the combination of the desirable electron transport property obtained by the intentionally introduced SnO₂ nanosheets (NSs) and the effectively retained inherent characteristics of SnO₂ NAs, i.e., large surface area and strong light-scattering effect. This work provides a promising approach for the rapid development of highly efficient SnO₂ photoanode film-based DSCs with the properties of simplicity of operation and control over the photoanode composition.
| S-EPMC6164877 | biostudies-literature
Project description:LncRNAs play pivotal roles in many important biological processes, but research on the functions of lncRNAs in human disease is still in its infancy. Therefore, it is urgent to prioritize lncRNAs that are potentially associated with diseases. In this work, we developed a novel algorithm, LncPriCNet, that uses a multi-level composite network to prioritize candidate lncRNAs associated with diseases. By integrating genes, lncRNAs, phenotypes and their associations, LncPriCNet achieves an overall performance superior to that of previous methods, with high AUC values of up to 0.93. Notably, LncPriCNet still performs well when information on known disease lncRNAs is lacking. When applied to breast cancer, LncPriCNet identified known breast cancer-related lncRNAs, revealed novel lncRNA candidates and inferred their functions via pathway analysis. We further constructed the human disease-lncRNA landscape, revealed the modularity of the disease-lncRNA network and identified several lncRNA hotspots. In summary, LncPriCNet is a useful tool for prioritizing disease-related lncRNAs and may facilitate understanding of the molecular mechanisms of human disease at the lncRNA level.
| S-EPMC5209722 | biostudies-literature
Project description:The identification of gene regulatory modules is an important yet challenging problem in computational biology. While many computational methods have been proposed to identify regulatory modules, their initial success is largely compromised by a high rate of false positives, especially when applied to human cancer studies. New strategies are needed for reliable regulatory module identification. We present a new approach, namely multi-level support vector regression (ml-SVR), to systematically identify conditionspecific regulatory modules. The approach is built upon a multi-level analysis strategy designed for suppressing false positive predictions. With this strategy, a regulatory module becomes ever more significant as more relevant gene sets are formed at finer levels. At each level, a two-stage support vector regression (SVR) method is utilized to help reduce false positive predictions by integrating binding motif information and gene expression data; a significant analysis procedure is followed to assess the significance of each regulatory module. We applied our method to breast cancer cell line data to identify condition-specific regulatory modules associated with estrogen treatment. Experimental results show that our method can identify biologically meaningful regulatory modules related to estrogen signaling and action in breast cancer. Three independent total RNA samples were extracted for each cell line (MCF-7 and MCF-7-stripped) and the samples were arrayed using Affymetrix GeneChip HG-U133A. MCF-7-stripped denotes estrogen-deprived MCF-7 human breast cancer cells, which were grown in the absence of estrogen for 96 hours. We analyzed the enriched motifs and their targets for the genes significantly down-regulated in MCF-7-stripped cells as compared to MCF-7 cells.
2010-03-23 | E-GEOD-20700 | biostudies-arrayexpress