Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Preparation and Compatibility Evaluation of Polypropylene/High Density Polyethylene Polyblends.

ABSTRACT: This study proposes melt-blending polypropylene (PP) and high density polyethylene (HDPE) that have a similar melt flow index (MFI) to form PP/HDPE polyblends. The influence of the content of HDPE on the properties and compatibility of polyblends is examined by using a tensile test, flexural test, Izod impact test, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), polarized light microscopy (PLM), and X-ray diffraction (XRD). The SEM results show that PP and HDPE are incompatible polymers with PP being a continuous phase and HDPE being a dispersed phase. The FTIR results show that the combination of HDPE does not influence the chemical structure of PP, indicating that the polyblends are made of a physical blending. The DSC and XRD results show that PP and HDPE are not compatible, and the combination of HDPE is not correlated with the crystalline structure and stability of PP. The PLM results show that the combination of HDPE causes stacking and incompatibility between HDPE and PP spherulites, and PP thus has incomplete spherulite morphology and a smaller spherulite size. However, according to mechanical property test results, the combination of HDPE improves the impact strength of PP.

SUBMITTER: Lin JH

PROVIDER: S-EPMC5458810 | biostudies-other | 2015 Dec

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Thermomechanical Properties of Virgin and Recycled Polypropylene-High-Density Polyethylene Blends.

Project description:This paper provides evidence and discusses the variability in the thermomechanical behaviour of virgin and recycled polypropylene/high-density polyethylene blends without the addition of other components, which is sparse in the literature. Understanding the performance variability in recycled polymer blends is of critical importance in order to facilitate the re-entering of recycled materials to the consumer market and, thus, contribute towards a circular economy. This is an area that requires further research due to the inhomogeneity of recycled materials. Therefore, the thermal and mechanical properties of virgin and recycled polypropylene/high-density polyethylene blends were investigated systematically. Differential scanning calorimetry concludes that both the recycled and virgin blends are immiscible. Generally, recycled blends have lower overall crystallinity and melting temperatures compared with virgin blends while, remarkably, their crystallisation temperatures are compared favourably. Dynamical mechanical analysis showed little variation in the storage modulus of recycled and virgin blends. However, the alpha and beta relaxation temperatures are lower in recycled blends due to structural deterioration. Deterioration in the thermal and mechanical properties of recycled blends is thought to be caused by the presence of contaminants and structural degradation during reprocessing, resulting in shorter polymeric chains and the formation of imperfect crystallites. The tensile properties of recycled blends are also affected by the recycling process. The Young's modulus and yield strength of the recycled blends are inferior to those of virgin blends due to the deterioration during the recycling process. However, the elongation at break of the recycled blends is higher compared with the virgin blends, possibly due to the plasticity effect of the low-molecular-weight chain fragments.

| S-EPMC10647352 | biostudies-literature

Study of crystallization behaviour of electron beam irradiated polypropylene and high-density polyethylene.

Project description:The influence of electron-beam irradiation on polypropylene (PP) and high-density polyethylene (HDPE) was investigated with a focus on crystallization. A high-temperature (200°C) creep test revealed that the HDPE gradually increased cross-linking density in the range 30-120 kGy, while the PP underwent a chain scission which was quantitatively evaluated by gel permeation chromatography. The mechanical properties were measured in the range -150 to 200°C by a dynamic mechanical analysis. A small presence of C=C and C=O bonds was found in the irradiated PP by a Fourier transform infrared spectroscopy. Crystallization kinetics measured by differential scanning calorimetry and hot-stage optical microscopy results were influenced tremendously by irradiation for HDPE and to a lesser extent for PP. Irradiation caused a decrease in both the number of nucleation centres and the growth rate of individual spherulites. Crystallization was analysed in detail with the help of Hoffman-Lauritzen, Avrami and Arrhenius equations. Interestingly an increasing β-crystal formation with an increasing irradiation level was discovered for PP by X-ray diffraction. A generation of defects in the crystalline structure owing to irradiation was discussed.

| S-EPMC8101015 | biostudies-literature

Effects of polypropylene, polyvinyl chloride, polyethylene terephthalate, polyurethane, high-density polyethylene, and polystyrene microplastic on Nelumbo nucifera (Lotus) in water and sediment.

Project description:Plastic waste is recognised as hazardous, with the risk increasing as the polymers break down in nature to secondary microplastics or even nanoplastics. The number of studies reporting on the prevalence of microplastic in every perceivable niche and bioavailable to biota is dramatically increasing. Knowledge of the ecotoxicology of microplastic is advancing as well; however, information regarding plants, specifically aquatic macrophytes, is still lacking. The present study aimed to gain more information on the ecotoxicological effects of six different polymer types as 4 mm microplastic on the morphology (germination and growth) and the physiology (catalase and glutathione S-transferase activity) of the rooted aquatic macrophyte, Nelumbo nucifera. The role of sediment was also considered by conducting all exposure both in a sediment-containing and sediment-free exposure system. Polyvinyl chloride and polyurethane exposures caused the highest inhibition of germination and growth compared to the control. However, the presence of sediment significantly decreased the adverse effects. Catalase activity was increased with exposure to polyvinyl chloride, polyurethane, and polystyrene, both in the presence and absence of sediment but more so in the sediment-free system. Glutathione S-transferase activity was significantly increased with exposure to polypropylene, polyvinyl chloride, and polyethylene terephthalate in the sediment-free system and exposure to polyethylene terephthalate and polyurethane in the absence of sediment. There was no clear correlation between the morphological and physiological effects observed. Further studies are required to understand the underlying toxicity mechanism of microplastics.

| S-EPMC8873133 | biostudies-literature

Preparation of High Density Polyethylene/Waste Polyurethane Blends Compatibilized with Polyethylene-Graft-Maleic Anhydride by Radiation.

Project description:Polyurethane (PU) is a very popular polymer that is used in a variety of applications due to its good mechanical, thermal, and chemical properties. However, PU recycling has received significant attention due to environmental issues. In this study, we developed a recycling method for waste PU that utilizes the radiation grafting technique. Grafting of waste PU was carried out using a radiation technique with polyethylene-graft-maleic anhydride (PE-g-MA). The PE-g-MA-grafted PU/high density polyethylene (HDPE) composite was prepared by melt-blending at various concentrations (0-10 phr) of PE-g-MA-grafted PU. The composites were characterized using fourier transform infrared spectroscopy (FT-IR), and their surface morphology and thermal/mechanical properties are reported. For 1 phr PU, the PU could be easily introduced to the HDPE during the melt processing in the blender after the radiation-induced grafting of PU with PE-g-MA. PE-g-MA was easily reacted with PU according to the increasing radiation dose and was located at the interface between the PU and the HDPE during the melt processing in the blender, which improved the interfacial interactions and the mechanical properties of the resultant composites. However, the elongation at break for a PU content >2 phr was drastically decreased.

| S-EPMC5507029 | biostudies-other

Preparation, characterization, and life cycle assessment of banana rachis-recycled high-density polyethylene composites.

Project description:Agro-industrial wastes are sustainable resources that have advantages as a reinforcement for polymeric matrices. This study examined the use of banana rachis fiber (BRF) in reinforcing the recycled high-density polyethylene (rHDPE) matrix. For this purpose, polymer composites with 5-20 wt% of BRF were prepared by the extrusion process using a twin-screw extruder and followed a hot press method. The structure of rHDPE/BRF composites and their characteristic peaks of degradation were successfully identified by the Fourier-transformed infrared spectroscopy and thermogravimetric analysis techniques, respectively, revealing a good dispersion of BRF in rHDPE. Differential scanning calorimetry results of the composites demonstrated that melt enthalpy decreases as the amount of BRF increases. XRD diffractograms revealed a crystallinity reduction of rHDPE due to the increase of fiber within the polymer matrix, which is reflected in the characteristic peaks' intensity decrease of HDPE. Variation in thermal and chemical properties with the addition of BRF in rHDPE was successfully evaluated in this study. Life cycle assessment for 1 kg composite production has also been evaluated. The banana rachis-rHDPE composite materials reduce the overall environmental impacts when the filler concentration increases.

| S-EPMC10545752 | biostudies-literature

Preferential lattice expansion of polypropylene in a trilayer polypropylene/polyethylene/polypropylene microporous separator in Li-ion batteries.

Project description:The abnormal lattice expansion of commercial polypropylene (PP)/polyethylene (PE)/polypropylene (PP) separator in lithium-ion battery under different charging current densities was observed by in-situ X-ray diffraction. Significant lattice changes of both PP and PE were found during the low current density charging. The capacity fading and the resistance value of the cell measured at 0.025 C (5th retention, 92%) is unexpectedly larger than that at 1.0 C (5th retention, 97.3%) from the electrochemical impedance spectroscopic data. High-resolution scanning electron microscopy is employed to witness the pore changes of the trilayered membrane. Density functional theory calculations were used to investigate the mechanism responsible for the irregular results. The calculations revealed that the insertion of Li-ion and EC molecule into PP or PE are thermodynamically favourable process which might explain the anomalous significant lattice expansion during the low current density charging. Therefore, designing a new separator material with a more compact crystalline structure or surface modification to reduce the Li insertion during the battery operation is desirable.

| S-EPMC7820226 | biostudies-literature

High-density polyethylene crystals with double melting peaks induced by ultra-high-molecular-weight polyethylene fibre.

Project description:High-density polyethylene (HDPE)/ultra-high-molecular-weight polyethylene (UHMWPE) fibre composites were prepared via solution crystallization to investigate the components of epitaxial crystal growth on a highly oriented substrate. Scanning electron microscopy morphologies of HDPE crystals on UHMWPE fibres revealed that the edge-on ribbon pattern crystals that were formed initially on UHMWPE fibres converted afterwards to a sheet shape as crystallization progressed. Wide-angle X-ray diffraction confirmed that the polymer chain oriented along the fibre axis and the orthorhombic crystal form of HDPE remained unchanged in HDPE/UHMWPE fibre composite systems. The thermal behaviour of the fibre composites measured by differential scanning calorimetry showed double melting peaks, the nature of which, as disclosed by partial melting experiments, is ascribed to bilayer components existing in the induced crystals: the inner layer is composed of more regularly folded chain crystals induced by UHMWPE fibres, and the outer layer formed on the inner one with a thinner and lower ordered crystal structure.

| S-EPMC6083719 | biostudies-literature

Preparation and Properties of a Novel Microcrystalline Cellulose-Filled Composites Based on Polyamide 6/High-Density Polyethylene.

Project description:In the present study, lithium chloride (LiCl) was utilized as a modifier to reduce the melting point of polyamide 6 (PA6), and then 15 wt % microcrystalline cellulose (MCC) was compounded with low melting point PA6/high-density polyethylene (HDPE) by hot pressing. Crystallization analysis revealed that as little as 3 wt % LiCl transformed the crystallographic forms of PA6 from semi-crystalline to an amorphous state (melting point: 220 °C to none), which sharply reduced the processing temperature of the composites. LiCl improved the mechanical properties of the composites, as evidenced by the fact that the impact strength of the composites was increased by 90%. HDPE increased the impact strength of PA6/MCC composites. In addition, morphological analysis revealed that incorporation of LiCl and maleic anhydride grafted high-density polyethylene (MAPE) improved the interfacial adhesion. LiCl increased the glass transition temperature of the composites (the maximum is 72.6 °C).

| S-EPMC5551851 | biostudies-other

Preparation, characterization, and evaluation of compressive strength of polypropylene fiber reinforced geopolymer mortars.

Project description:The study of the fiber-matrix interface represents a crucial topic to determine the mechanical performance of geopolymer-based materials reinforced with polypropylene fibers (PPF). This research proposes the use of natural zeolite in the preparation geopolymers mortars through alkaline activation with NaOH, Ca(OH)2 and Na2SiO3, and with river sand as a fine aggregate. PPF were incorporated into the geopolymer-based mortar matrix in different proportions like 0, 0.5, and 1 wt.%. The mortars were cured for 24 h at 60 °C and then aged for six days more at room temperature. All samples analyzed through compressive strength were also characterized by X-ray diffraction, thermal analysis, Infrared Spectroscopy, and scanning electron microscopy techniques. The results indicated that the best mix design among the ones used: NaOH (10 M), Na2SiO3/NaOH = 3, Ca(OH)2 = 1.5 wt.% and PPF = 0.5 wt.%. The optimum mix design showed a compressive strength of 4.63 MPa on average. Besides, the fibers enhanced the compressive strength of those samples which the PP fibers probably have better dispersion inside the matrix of the geopolymer mortar.

| S-EPMC7168747 | biostudies-literature

Ternary Blends of Polypropylene Copolymer, Polyethylene and Thermoplastic Polyurethane for Fused Deposition Modeling Three-Dimensional Printing Technology: Preparation, Printing and Properties.

Project description:A set of filaments for fused deposition modeling (FDM) three-dimensional (3D) printing was developed from the ternary blends of polypropylene random copolymer (PPR or P), high density polyethylene (HDPE or E), and thermoplastic polyurethane (TPU or T), formulated with different weight ratios of polymers, i.e., 80:20:0, 70:20:10, 60:20:20, and 50:20:30, respectively, and coded as P80E20T0, P70E20T10, P60E20T20, and P50E20T30, respectively. The blend composition was optimized to obtain both high-quality filaments with low ovality and FDM-fabricated objects with minimized warpage and good interlayer bonding. The crystallization and crystalline morphologies of individual polymers in the blend filaments were comprehensively analyzed by differential scanning calorimetry (DSC), X-ray diffraction (XRD), and polarized light optical microscopy (PLOM). It was found that HDPE acted as crystalline nuclei for PPR crystallization; PPR appeared to crystallize more readily at a slightly higher T c with somewhat greater crystallinity. Meanwhile, TPU explicitly restricted the crystallization of both polyolefins; decreases in both the size and growth rate of their spherulites were observed. The PLOM and SEM results indicated that the surface morphology of the ternary blends was not absolutely phase-separated; an increasing number of TPU droplets inherently imbedded at the boundary of the polyolefin aggregate phase when a higher TPU quantity was integrated. Consequently, the warpage deformation and layer interfusion of the as-printed articles were most remarkably improved when P50E20T30 was used. Nonetheless, the incorporation of relatively flexible TPU material into the PPR-based filaments inevitably reduced their mechanical performance; the flexural strength and modulus of the highest-quality 3D-printed P50E20T30 object were fairly decreased by approximately 25% and 12%, respectively.

| S-EPMC11325508 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data