Dataset Information

Use of Amphoteric Copolymer Films as Sacrificial Layers for Constructing Free-Standing Layer-by-Layer Films.

ABSTRACT: The present paper reports the use of an amphoteric copolymer, poly(diallylamine-co-maleic acid) (PDAMA), as a component of precursor layers (or sacrificial layers) for constructing free-standing layer-by-layer (LbL) films. A PDAMA-poly(styrenesulfonate) (PSS) film or PDAMA-poly(dimethyldiallylammonium chloride) (PDDA) film was coated on the surface of a quartz slide at pH 4.0 or 8.0, respectively, as a sacrificial layer that can be removed by changing the pH. The surface of the sacrificial layer was further covered with LbL films composed of poly(allylamine hydrochloride) (PAH) and PSS. The PAH-PSS films were released from the substrate upon immersing the film-coated quartz slide in acidic or neutral/basic solution, respectively, as a result of the pH-induced dissolution of the PDAMA-PDDA or PDAMA-PSS sacrificial layer. Thus, PDAMA-based sacrificial layers have been demonstrated to dissolve in both acidic and neutral solutions, depending on the type of counter polymer. The thicknesses of the sacrificial layers and released LbL films are crucial factors for constructing free-standing LbL films. The releasing kinetics also depended on the thickness of the crucial layers. The free-standing PAH-PSS films obtained were stable in water or in air in the dry state. PDAMA-based sacrificial layers may be useful in constructing free-standing LbL films containing biomolecules with limited pH stability.

SUBMITTER: Wang B

PROVIDER: S-EPMC5458941 | biostudies-other | 2013 Jun

REPOSITORIES: biostudies-other

ACCESS DATA

Similar Datasets

Project description:We report an approach to the fabrication of free-standing and amine-reactive thin films that is based on the reactive layer-by-layer assembly and subsequent lift-off of azlactone-containing polymer multilayers. We demonstrate that covalently cross-linked multilayers fabricated using the azlactone-functionalized polymer poly(2-vinyl-4,4-dimethylazlactone) (PVDMA) and a primary amine-containing polymer [poly(ethyleneimine) (PEI)] can be delaminated from planar glass and silicon surfaces by immersion in mildly acidic aqueous environments to yield flexible freestanding membranes. These free-standing membranes are robust and can withstand exposure to strong acid, strong base, or incubation in high ionic strength solutions that typically lead to the disruption and erosion of polymer multilayers assembled by reversible weak interactions (e.g., "polyelectrolyte multilayers" assembled by electrostatic interactions or hydrogen bonding). We demonstrate further that these PEI/PVDMA assemblies contain residual reactive azlactone functionality that can be exploited to chemically modify the films (either directly after fabrication or after they have been lifted off of the substrates on which they were fabricated) using a variety of amine-functionalized small molecules. These free-standing membranes can also be transferred readily onto other objects (for example, onto the surfaces of planar substrates containing holes or pores) to fabricate suspended polymer membranes and other film-functionalized interfaces. In addition to planar, two-dimensional free-standing films, this approach can be used to fabricate and isolate three-dimensional free-standing membranes (e.g., curved films or tubes) by layer-by-layer assembly on, and subsequent lift-off from, the surfaces of topologically complex substrates (e.g., the curved ends of glass tubing, etc.). The results of this investigation, when combined, suggest the basis of methods for the fabrication of stable, chemically reactive, and flexible polymer thin films and membranes of potential utility in a variety of fundamental and applied contexts.

Dataset Information

Use of Amphoteric Copolymer Films as Sacrificial Layers for Constructing Free-Standing Layer-by-Layer Films.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets